• Natural Product Sciences
• /
• 제1권1호
• /
• pp.66-69
• /
• 1995

Traditional Antheraea pernyi silkworm cocoon is tawny color. The white Antheraea pernyi silkworm cocoons studied here by IR and UV are new breeds of recent breeding. We discovered that the main body of the first grade structure of silk protein in the new white is as same as the one in the traditional tawny Antheraea pernyi silkworm cocoon, yet there are small quantities of cross-linked polymer of gentisic acid and silk protein in the white silkworm cocoons. In spite of the least surviving quantity of the polymer, the white silkworm cocoons are most white and its white color is similar to white Bombyx mori silkworm cocoon.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.418-418
• /
• 2012

We fabricated a new type of hybrid film using molecular layer deposition (MLD). The MLD is a gas phase process analogous to atomic layer deposition (ALD) and also relies on a saturated surface reaction sequentially which results in the formation of a monolayer in each sequence. In the MLD process, polydiacetylene (PDA) layers were grown by repeated sequential surface reactions of titanium tetrachloride and 2,4-hexadiyne-1,6-diol with ultraviolet (UV) polymerization under a substrate temperature of $100^{\circ}C$. Ellipsometry analysis showed a self-limiting surface reaction process and linear growth of the hybrid films. Polymerization of the hybrid films was confirmed by infrared (IR) spectroscopy and UV-Vis spectroscopy. Composition of the films was confirmed by IR spectroscopy and X-ray photoelectron (XP) spectroscopy. The titanium oxide cross-linked polydiacetylene (TiOPDA) hybrid films exhibited good thermal and mechanical stabilities.

• Archives of Pharmacal Research
• /
• 제19권1호
• /
• pp.18-22
• /
• 1996

Acrylate-terminated poly (ethylene glycol) (PEG) macromer was prepared by the reaction of PEG with acryloyl chloride. Photopolymerization of PEG macromer resulted in the formation of cross-linked PEG network. Interpenetrating polymer networks (IPNs) based on PEG and poly(acrylic acid) (PAA) was obtained via template polymerization of AA to the PEG network by UV curing. The swelling degree of the IPNs hydrogel increased with an increase of pH value due to the association-dissociation between carboxylic acid of PAA and either of PEG through hydrogen bounding. The swelling-deswelling behavior proceeded reversibly for the IPNs upon changing pH. Release of indomethacin from the IPNs demonstrated "on-off" regulation with pH fluctuation.

• 공업화학
• /
• 제21권2호
• /
• pp.200-204
• /
• 2010

고체 표면의 성질은 물질의 사용을 결정하는데 있어서 중요하다. 그래서 고분자 박막을 사용하여 표면을 개질시켜 표면층의 물리적, 화학적 성질을 제어하는 방법이 떠오르고 있다. 본 연구에서는 기판 표면과 고분자 간의 화학적 derivatization 없이 광화학 반응을 통하여 간단하고 효과적인 방법으로 고체 표면위에 고분자 박막을 흡착하여 표면을 개질시키는 방법을 설명하였다. 실리콘 웨이퍼에 스핀 코팅으로 형성된 광반응성이 있는 P4VP 박막을 이용하여 다른 고분자를 얹혀 UV 노광을 조사하여 벤질 라디칼 moieties 반응으로 고정하였다. 광화학 반응의 결과, UV 가교가 일어난 고분자는 P4VP 박막에 고정되어 지고, 반응이 일어나지 않은 부분은 초음파 세척으로 제거할 수 있다. 고정된 박막의 두께는 UV 노광 시간과 고분자의 분자량에 상관하여 형성되며, 광화학 반응으로 고정되기 때문에 photolithography 공정으로 마이크론 패턴 형성이 가능하다.

• 공업화학
• /
• 제19권3호
• /
• pp.299-303
• /
• 2008

열경화가 가능한 PPV유도체인 poly[(2,5-dimethoxy-1,4-phenylenevinylene)-alt-(1,4-phenylenevinylene)] (Cross-PPV)를 Heck coupling 반응을 이용하여 합성하였다. Cross-PPV 박막은 $200^{\circ}C$에서 경화 시키면 일반적인 유기용매에 용해되지 않는 불용성의 고분자 박막이 된다. 열경화 전 후의 Cross-PPV의 구조는 FT-IR로 확인하였으며 구조의 차이는 크지 않았다. 경화된 Cross-PPV는 일반적인 유기용매에 대하여 내용매성이 강하다. 순환전압전류법과 흡수분광법으로 측정한 경화된 Cross-PPV의 호모 및 루모 에너지 준위는 각각 -5.11 eV와 -2.56 eV으로 ITO로 부터의 정공주입장벽(hole injection barrier)이 작아(약 0.1 eV) 정공주입층으로 효과적으로 사용 할 수 있다. 호모 및 루모 에너지 준위가 각각 -5.44 eV, -3.48 eV인 poly(1,4-phenylenevinylene-(4-dicyanomethylene-4H-pyran)-2,6-vinylene-1,4-phenylene-vinylene-2,5-bis(dodecyloxy)-1,4-phenylenevinylene) (PM-PPV)을 발광층으로 사용하여 두층의 구조(bilayer structure)를 갖는 소자(ITO/crosslinked Cross-PPV/PM-PPV/Al)를 제작, 특성을 평가한 결과 최대 효율은 0.024 cd/A, 최대 발광세기는 $45cd/m^2$으로 단층형 소자(ITO/PM-PPV/Al)(최대 효율 = 0.003 cd/A, 최대 발광세기 = $3cd/m^2$)에 비하여 매우 월등한 성능을 나타냄을 확인하였다. 또한 두층의 구조를 가지는 다층형 소자의 발광스펙트럼은 단층형 소자의 발광 스펙트럼과 동일하다. 이러한 사실들로 보아 ITO 및 Al에서 주입된 전자는 모두 발광층인 PM-PPV층에서 재결합(recombination)되어 여기자(exciton)가 형성되는 것으로 사료된다.

• Macromolecular Research
• /
• 제17권9호
• /
• pp.709-713
• /
• 2009

The aim of this study was to develop novel intestinal specific drug delivery systems with pH sensitive swelling and drug release properties. The carboxyl group of ibuprofen was converted to a vinyl ester group by reacting ibuprofen and vinyl acetate as an acylating agent in the presence of catalyst. The glucose-6-acrylate-1, 2, 3, 4-tetraacetate (GATA) monomer was prepared under mild conditions. Cubane-1, 4-dicarboxylic acid (CDA) linked to two 2-hydroxyethyl methacrylate (HEMA) group was used as the crosslinking agent (CA). Methacrylic-type polymeric prodrugs were synthesized by the free radical copolymerization of methacrylic acid, vinyl ester derivative of ibuprofen (VIP) and GATA in the presence of cubane cross linking agent. The structure of VIP was characterized and confirmed by FTIR, $^1H$ NMR and $^{13}C$ NMR spectroscopy. The composition of the cross-linked three-dimensional polymers was determined by FTIR spectroscopy. The hydrolysis of drug polymer conjugates was carried out in cel-lophane membrane dialysis bags, and the in vitro release profiles were established separately in enzyme-free simulated gastric and intestinal fluids (SGF, pH 1 and SIF, pH 7.4). The detection of a hydrolysis solution by UV spectroscopy at selected intervals showed that the drug can be released by hydrolysis of the ester bond between the drug and polymer backbone at a low rate. Drug release studies showed that increasing the MAA content in the copolymer enhances the rate of hydrolysis in SIP. These results suggest that these polymeric prodrugs can be useful for the release of ibuprofen in controlled release systems.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.14-17
• /
• 2006

This paper describes a novel processing technique for fabrication of polymer-derived SiCN (silicone carbonitride) microstructures for super-temperature MEMS applications. PDMS (polydimethylsiloxane) mold is fabricated on SU-8 photoresist using standard UV photolithographic process. Liquid precursor is injected into the PDMS mold. Finally, solid polymer structure is cross-linked using HIP (hot isostatic pressure) at $400^{\circ}C$, 205 bar Optimum pyrolysis and anneal ins conditions are determined to form a ceramic microstructure capable of withstanding over $1400^{\circ}C$. The fabricated SiCN ceramic microstructure has excel lent characteristics, such as shear strength (15.2 N), insulation resistance ($2.163{\times}10^{14}\;{\Omega}$) and BDV (min. 1.2 kV) under optimum process condition.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.305-305
• /
• 2012

The organic-inorganic hybrid polymer thin films were deposited using the gas phase method which known as molecular layer deposition (MLD). Titaniumchloride (TiCl4) and 1,4-phenylenediamine (PD) were used as monomers to deposit hybrid polymer. Self-terminating nature of TiCl4 and PD reaction were demonstrated by growth rate saturation versus precursors dosing time. Infrared spectroscopic and X-ray photoelectron spectroscopy were employed to determine the chemical composition and state of hybrid polymer thin films. Layer by layer growth was showed by increasing UV-VIS absorption peak of hybrid polymer thin films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.191-191
• /
• 2012

InP quantum dot (QD) - organosilicon nanocomposites were synthesized and their photoluminescence quenching was mainly investigated because of their applicability to white LEDs (light emitting diodes). The as-synthesized InP QDs which were capped with myristic acid (MA) were incompatible with typical silicone encapsulants. Post ligand exchange the MA with a new ligand, 3-aminopropyldimethylsilane (APDMS), resulted in soluble InP QDs bearing Si-H groups on their surface (InP-APDMS) which allow embedding the QDs into vinyl-functionalized silicones through direct chemical bonding, overcoming the phase separation problem. However, the ligand exchange from MA to APDMS caused a significant decrease in the photoluminescent efficiency which is interpreted by ligand induced surface corrosion relying on theoretical calculations. The InP-APDMS QDs were cross-linked by 1,4-divinyltetramethylsilylethane (DVMSE) molecules via hydrosilylation reaction. As the InP-organosilicon nanocomposite grew, its UV-vis absorbance was increased and at the same time, the PL spectrum was red-shifted and, very interestingly, the PL was quenched gradually. Three PL quenching mechanisms are regarded as strong candidates for the PL quenching of the QD nano-composites, namely the scattering effect, Forster resonance energy transfer (FRET) and cross-linker tension preventing the QD's surface relaxation.

• Macromolecular Research
• /
• 제17권7호
• /
• pp.522-527
• /
• 2009

A photocrosslinkable polyphosphazene was used for molecular imprinting. We synthesized polyphosphazene (3) having urea groups for complexation with N-carbobenzyloxyglycin (Z-Gly-OH, template) and chalcone groups for cross-linking reaction. As substituents, 4-hydroxycha1cone (1) and N-(4-hydroxyphenyl)-N'-ethylurea (2) were prepared. Choloro groups of poly(dichlorophosphazene) were replaced by the sequential treatment with sodium salts of compounds 1 and 2, and trifluoroethanol. The template molecule was complexed with the urea groups on the polymer chains via hydrogen bonding. A thin polymer film was prepared by casting a solution of the complex of polymer 3 and the template in dimethylformamide on a quartz cell and irradiated with 365 nm UV light to yield a cross-linked film with a thickness of about $16{\mu}m$. The template molecules in the film were removed by Soxhlet extraction with methanol/acetic acid. The control polymer film was prepared in the same manner for the preparation of the imprinted polymer film, except that the template and triethylamine were omitted. In the rebinding test, the imprinted film exhibited much higher recognition ability for the template than the control polymer. We also investigated the specific recognition ability of the imprinted polymer for the template and its structural analogues. The rebinding tests were conducted using Z-Glu-OH, Z-Asp($O^tBu$)-OH, and Z-Glu-OMe. The imprinted film showed higher specific recognition ability for the template and the lowest response for Z-Asp($O^tBu$)-OH.