• Journal of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.310-312
• /
• 1990

• Bulletin of the Korean Space Science Society
• /
• 2009.04a
• /
• pp.36.4-37
• /
• 2009

• Ocean and Polar Research
• /
• v.23 no.4
• /
• pp.389-394
• /
• 2001

During austral summer 1998 we examined the impacts of artificial UV-B and solar radiation on chlorophyll a content and fresh weight of four species of Antarctic red algae namely, Georgiella confluens, Iridaea cordata, Pantoneura plocamioides and Porphyra endiviifolium. These subject species were taken in consideration of clear demarcations of their vertical distribution and classified as shallow water group (Iridaea and Porphyra) and deep water group (Georgiella and Pantoneura). When irradiated with artificial UV-B at the irradiance of $2.0Wm^{-2}$ the shallow water inhabitants were much more resistant than the algae from deep water the fresh weight of which was reduced by 40-50% relative to control apart from loss of pigmentation. Direct solar radiation was lethal to the deep water group with a sign of complete bleaching whereas the shallow water group did not show any change in the physiological parameters. We were unable to discriminate difference in the algal sensitivity between UV-filtered and UV-transparent treatments since samples tested were either all unaffected or dead. Spectrophotometric measurements of methanolic extracts revealed a strong absorption peak in the UV range in the shallow water group of algae, Iridaea and Porphyra, but not in the deep water counterparts. Species difference in sensitivity to artificial UV-B and solar radiation is discussed in relation to biochemical and morphological characteristics and the role of the radiation in the algal vertical distribution is suggested from ecological perspective.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.100-105
• /
• 2006

The photocatalytic activity of phenol degradation was investigated with the variation of operating parameters in $UV/TiO_2$ honeycomb reactor. In the comparison of phenol degradation rates among various $TiO_2$, Ishihara (STS-02)-coated honeycomb exhibited a slightly higher photocatalytic activity than Degussa P25-coated honeycomb. On the other hand, honeycomb coated by alcohol-mixed $TiO_2$ (N Co.) did not exhibit any photocatalytic activity on phenol degradation. With the increase of Degussa P25 coating amounts, the honeycomb reactor exhibited the gradual increase of phenol degradation rates. The degradation rate of phenol over $UV/TiO_2$ (Degussa P25) honeycomb reactor was asymptotically increased up to 500 mL/min, subsequently followed by a slight decrease as the recirculation rate (100~700 mL/min) was increased. UV absorption at 269 nm was high due to partial degradation of phenol at initial reaction time because the honeycomb surface was pre-adsorbed by phenol prior to UV irradiation.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.515-518
• /
• 2013

We present synthesis of a new kind of organic-inorganic hybrid polymer, poly xylene-hexamethyltrisiloxane hybrid (PXS) by a new synthetic way from o-xylene and 1,1,3,3,5,5-hexamethyltrisiloxane. The merged molecular structure of the two monomeric components for the PXS polymer was confirmed by $^{13}C$- and $^1H$-NMR, and FT-IR. Its optical absorption and emission properties were investigated by UV-vis absorption and photoluminescence (PL) spectroscopy. The PXS exhibits absorption at 265 nm which is the same with the o-xylene but tailing up to nearly 400 nm, which is maybe related the polymeric structure of the PXS. For the PL investigation, the PXS shows red-shift of the peak from 288 nm (o-xylene) to 372 nm in the case of excitation at 265 nm, at which both PXS and o-xylene have sufficiently high absorption for excitation. When 325-nm laser is used for excitation, the PXS shows a broader peak at 395 nm compared to the excitation at 265 nm and the o-xylene shows no luminescence probably due to the lack of absorption at 325 nm.

• Analytical Science and Technology
• /
• v.11 no.2
• /
• pp.79-87
• /
• 1998

Consumers have recently preferred to purchase extensive UV intercepting products, which are waterproof and free from side effects on skin. During the testing of cytotoxicity (in-vitro) in neutral red (NR) method, cell survival ratio of UV-B interceptors decreased to just above 0.08 w/v%, and it was observed that the UV-A interceptors the ratio also decreased to just above 0.06 w/v%. In addition patch-tests of inorganic UV interceptors resulted in no skin irritation even below 10.0 and 11.25. In absorption curves, UV-B was most suitable for octyl methoxycinnamate (OMC) and UV-A for butyl methoxy dibenzoylmethane (BMDM). For this reason, $Nylonpoly^{TM}$ UVA/UVB the material of OMC and BMDM coated with Nylon & polyethylene, was used as the organic UV interceptor. Zinc oxide (ZnO) and titanium dioxide ($TiO_2$) was used as inorganic UV interceptors. The appropriate mixture ratio of ZnO and $TiO_2$ was 6 to 4:6% of ZnO, 4% of $TiO_2$ and 5% of $Nylonpoly^{TM}$ UVA/UVB were all combined and added to our sunscreen cream. The SPF value of in-vitro was 38.9. In practical application, each sun protection factor (SPF) duration of oil-in-water (O/W) emulsion and water-in-silicone (W/S) emulsion containing sunscreen cream of the same content showed that W/S type of sunscreen cream was 5 times as durable as the other. Therefore, this product is fit for use in swimming, climbing or skiing. This research is to minimize skin trouble caused by UV interceptors and to make one with proper softness, skin safety and UV intercepting efficiency.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.3
• /
• pp.228-233
• /
• 2005

Langmuir-Blodgett(LB) technique can speak the best candidate of the future molecular electronic devices. But, precursor as molecular ultrathin film devices require the bulk property that are influenced by the molecular orientation. So, this device is one of current interest in molecular electronic device development of new materials. In this study, quantitative evaluation of molecular orientation in LB films of polyamic acid alkylamine salt was performed analysis experiment comparing the absorption or transmission intensity of the FT-IR spectrometer and reflection or absorption spectra with UV-visible absorption spectra. It could find that the polar angle(${\theta}$) of the dipole moment appears in about $68^{\circ}$ and the tilting angle of the alkyl chain is about $11.5^{\circ}$.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.53.1-56
• /
• 2000

Langmuir-Blodgett(LB) technique is the best candidate for the future molecular electronic devices. But, these molecular thin film devices require the bulk properties that are influenced by the molecular orientations. So, this is of current interest in molecular electronic device fabrications of new materials. In this study, quantitative evaluation of molecular orientation in LB films of PAAS was performed by comparing the absorption intensities of the FT-IR transmission and reflection-absorption spectra and the polarized UV/visible absorption spectra. It was found that the polar angle($\theta$) of the dipole moment is about 68$^{\circ}$and the tilting angle of the alkyl chain is about $11.5^{\circ}$ .

• Journal of Photoscience
• /
• v.10 no.1
• /
• pp.149-155
• /
• 2003

The absorption, fluorescence and fluorescence-excitation spectra of concentrated toluene solutions of selected para substituted trans-stilbene derivatives provide strong evidence for aggregation. A red-shifted fluorescence spectrum peaking at 420 nm gains in intensity as the stilbene concentration is increased. The excitation spectrum of this new emission is well to the red of the normal stilbene absorption spectrum, consistent with the appearance of a red shifted shoulder in the UV spectrum. Formation of a fluorescent ground state dimer (or higher aggregate) is proposed to account for these observations. The presence of polar substituents is crucial to the formation of this ground state complex.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.721-723
• /
• 2002

We report a new red light emitting fluorene-based copolymer, poly{9,9-bis(2'-ethylhexyl)fluorene-2,7-diyl-co-2, 5-bis(2-thienyl-1-cyanovinyl}-1-(2'-ethylhexyloxy)-4methoxybenzene-5",5'''-diyl} (PFTCVB). The synthesized copolymers showed the absorption maxima at about 380 nm and the absorption between 425 and 600 nm increased as the fraction of the thiophene-containing monomer (BTCVB) increased. In PL, the emission maxima of the copolymers were red-shifted as the fraction of BTCVB increased, despite the similar absorption characteristics were shown in the UV-visible spectra. The copolymer containing 15 mol% of BTCVB showed a maximum PL and EL emission at 620 and 630 nm.