• 복식문화연구
• /
• 제11권1호
• /
• pp.66-74
• /
• 2003

This study is to improve the worst lightfastness of a natural dye. To modify the fiber surface, low temperature oxygen plasma was carried out on silk fabric. The result is followed below after the examination of surface shape, dyeability, color change, UV absorbent influence and lightfastness. 1. When electric discharge outputs are 60W, 80W and 100w, and processing times are 10minutes, 20minutes and 40minutes, the etching effect of surface increased as electric discharge outputs and processing times increased. 2. When examined UV absorbent for 5hours, 10hours, 20hours, 40hours and 80hours, the value changes of E are 1.47, 2.51, 2.91, 3.71, 4.51 and 5.31 in case of Al pre-mordanting/ prasma 80W, 20min./ UVabsorbent 5% (100:1), 2.31, 2.47, 3.84, 3.90, 3.61 and 4.42 in case of Al pre-mordanting/prasma 80W, 20min.1 UV absorbent 5% (o.w.f.). The lightfastness decreased when UV absorbent increased. 3. Dyeability of the samples pre-treated with five different methods was in the following order: plasma processing for 20minutes at 60W/Al pre-mordanting > Al pre-mordanting > plasma processing for 20minutes at 60W > Al after-mordanting. non mordanting Plasma treatment had superior effect on dyeability. 4. When UV absorbent was applied in fabric, the sample under higher electric discharge out puts showed more effective in improving lightfastness.

• 한국의류학회지
• /
• 제23권6호
• /
• pp.909-918
• /
• 1999

The indigo-dyed blue denim garments are favored not only by young people but also by almost everyone of life, In the early years they were casually worn on most occasions but became universal recently. Such denim garments are treated with various process to give it optimal softness and color contrast of blue and white. The processess can generate photoyellowing and thus the yellowing may damage their appearance and quality. So this study is to find the solutions to reduce the photoyellowing problem. For this prupose sample denim were treated with cellulase fluorescent brightener UV absorbent etc. The results were as follows; The yellowing would be more accelerated by fluorescent brightening. Since the yellowing was reduced by 90% In particular the application of the UV absorbent before using of the fluorescent brightener was most effective. The optimal concentration was 0.5% (o.w.f) and the benzophenone compounds were found most effective for the indigo denim. And reduction effect of yellowing by UV absorbent was lowered with repeated laundering but metal compound treatment on fabric made a removal of UV absorbent by laundering prevented.

• 대한화학회지
• /
• 제55권1호
• /
• pp.98-103
• /
• 2011

본 연구는 자외선 흡수제로 사용되는 benzophenone계(group) 및 높은 굴절률과 화학적, 물리적으로 매우 안정한 물질로 알려진 $TiO_2$를 기존의 재료에 첨가하여 자외선 차단 기능을 가진 고분자 재료를 중합하였다. 중합 결과 생성된 고분자의 자외선 흡수 정도를 기존의 재료들과 비교하였으며, 제조된 콘택트렌즈의 함수율, 굴절률 및 광투과율등의 기본적인 물성을 측정하였다. 측정 결과, 자외선 흡수제를 첨가한 콘택트렌즈의 굴절률과 함수율은 각각 1.430~1.440, 35.0~45.0의 값들로 나타나 기존의 콘택트렌즈와 비슷한 결과를 나타내었다. 또한 각 파장대별 광투과율에서는 자외선 흡수제를 넣지 않은 콘택트렌즈에서는 UV-A, UV-B, 가시광선 투과율이 각각 89%, 88%, 89%로 나타나 자외선 투과율이 매우 높았으나, 2-hydroxy-4-methoxy-benzophenone와 2,4-dihydroxy-benzophenone을 첨가한 콘택트렌즈의 경우, 각각 UV-A 0%, UV-B 6%의 투과율을 나타내어 자외선 차단 효과가 있는 것으로 나타났다. 또한 $TiO_2$를 첨가한 콘택트렌즈의 경우, 각각 UV-A 6%, UV-B 51%의 투과율을 나타내어 자외선 차단 효과가 다소 있는 것으로 나타났다. 가시광선 투과율은 모두 77~89%로 콘택트렌즈의 가시광선 투과율의 조건에 만족함을 알 수 있었다.

• 한국응용과학기술학회지
• /
• 제12권2호
• /
• pp.157-163
• /
• 1995

The ultraviolet blocking agents used to skincare are largely classified ultraviolet scattering agent and ultraviolet absorbent agents. There are UVC, UVB, and UBA in ultraviolet ray(UV) showing shorter wavelength than visible light. Both visible light and UVA give rise to 1st dark-skinned phenomena. On exposure of the skin to UV, phenomena of skin variation are termed sunburn or suntan. There are chronic and acute adverse reactions in skin response to UV. The latter is caused by UVB, which has mainly effects on the skin. But lately due to destruction of ozone layer, UVA has more serious irritation on the skin than UVB. In this paper spectrometric properties of UV absorbent agents such as PABA, octyl-PABA, Urocanic acid, and 2-hydroxy-4-methoxy benzophenone in vitro have been investigate. As results, it was found that the three fomer were more suitable than the last. UV scattering measurements on the sample used inorganic pigments showed that pigments containing titanium dioxide had a better scattering effects than the inorganic pigments such as $Fe_2O_3$, $Al_2O_3$, etc.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.417-430
• /
• 2003

A new method was developed to prepare microcapsules involving hydrophobic components. A totally new "silicone-resin-polypeptide" was used as the wall materials. The polypeptide was made by hydrolysis of collagen and silk protein and so on, and that was combined with silicone. This microcapsule was easily prepared from silicone-resin-polypeptide in water solution. The ratio of encapsulation in the microcapsule was not only high level as 90％, which had never been reached, but also the particle size could be controlled to obtain very small size (average particle size: 2${\mu}{\textrm}{m}$). Moreover, these microcapsules were resistant to high shearing forces and were stable over a long time period. This stable microcapsule was not crushed in pressure with finger spreading, so the core materials hardly touch the skin directly. Application in cosmetics by using microcapsule involving UV absorbents (2-ethylhexy1-4-methoxycinnamate (OMC) and 4-tert-butyl-4' -methoxydibenzoyl-methane (BMDBM)) was examined. It was possible to apply organic UV absorbents in water-rich formulations without any surfactant by using this microcapsule. This formulation demonstrated a good moisturizing and soft skin feel. Therefore, the microcapsule was applied to hair care products. As a result, the sunscreen hair lotion with microcapsule was able to prevent from damaging and decoloring of hair color by UV rays. As just, it was suggested that this microcapsules were be widely applied in cosmetics.cosmetics.

• 공업화학
• /
• 제28권3호
• /
• pp.318-325
• /
• 2017

원자력발전소 2차 계통수에 사용되는 에탄올아민이 포함된 오염수는 복수탈염설비의 이온교환수지에서 포집된다. 이온교환수지의 재생과정에서 에탄올아민과 다량의 이온성 물질이 포함된 강산성 폐수가 발생된다. 본 연구는 이온교환수지에서 발생하는 폐수를 처리하기 위해서 자외선 산화방법을 적용하였다. 산화방법은 흡착제를 함께 사용한 자외선 산화와 흡착제를 적용하지 않고 자외선 산화만 적용할 수 있는 장치를 개발하여 자외선 산화방법에서 흡착제가 폐수처리 성능에 미치는 영향을 파악하였다. 연구 결과는 입상활성탄을 흡착제로 적용한 UV/GAC산화공정은 pH 12.8에서 COD 제거 효율은 71.3%로 나타났다. 동일한 pH 조건에서 흡착제를 적용하지 않은 UV 산화공정보다 COD 제거 효율이 21.8% 높게 나타났다. T-N의 제거는 pH 12.8일 때 88.6%로 흡착제를 적용하지 않은 UV산화공정보다 18.0% 높게 나타났다. 이와 같은 결과는 입상활성탄이 에탄올아민을 고정시켜서, UV 램프에 의한 산화공정의 효율을 높이는 것으로 여겨진다. 따라서 UV/GAC 흡착산화공정이 에탄올아민 함유 폐수의 처리에 더 효율적이다.

• 대한화장품학회지
• /
• 제26권1호
• /
• pp.41-58
• /
• 2000

최근 환경오염으로 인한 지구오존층의 파괴로 자외선의 지표면의 도달 량이 증가하고 그로 인한 인간에 대한 피해가 증가하고 있다 . 과도한 자외선의 피부에 대한 직접적인 노출은 피부에 많은 문제점을 야기하므로 일차적으로 자외선차단제를 이용하여 인체에 대한 직접적인 피해를 최소화 해야한다 . 현재 자외선 차단제는 유기자외선흡수제와 무기자외선산란제가 많이 사용이 되는데 적은량으로도 효과가 높은 유기자외선차단제는 사용 시 주의를 요하므로 국가별로 사용량과 사용여부에 대하여 규제를 하고 있다. 본 연구에서는 플라보노이드류 ,알카로이드류 같은 자외선 흡수 성분을 함유한 식물중 UV/vis spectrophotometer 에서 자외선 흡수 peak을 나타내는 금은화 , 포공영, 녹차 , 황금추출물을 이용하여 화장품의 자외선 흡수제로서의 사용가능성여부를 조사하였다. 또한 식물추출물이 가진 자극성 성분과 오염성, 그들이 가진 유효성분들을 보호하고자 실리콘을 이용한 겔화를 시도하였다 . 자연친화적인 천연물로써 식물추출성분을 이용 유기자외선흡수제의 사용량을 줄이는 자외선홉수보조제로서 가능성을 보여주었다.

• 복식문화연구
• /
• 제11권6호
• /
• pp.967-971
• /
• 2003

As the concerns over health increased in 1990's, research and development on the health material were also activated. The development of UV-cut textile became the hot issue, because the damage of W irradiation due to ozone depletion has become widely known. UV-cut effect is determined by the material, the color, the organization and the density of UV-cut fibers. UV-cut effect is very different according to the fibers. Polyester is known to have a better effect. Even in the same textile material, staple fiber has more effect than filament fiber. Different colors have different offsets. Although textiles have the same color, the effects can be different according to the depth of color. PET, PET/cotton blend, nylon and cotton fabrics were ultraviolet cutting finished with padding method using several absorbers. These UV-cut effect can be improved through the processing. Safety of UV-cut textile for the body must be considered future, Until now the figure of the UV-cut effects has been emphasized. There has been no experiment on the human body, although the textiles are directly on the human body. Futhermore there os no safety standard of UV-cut textiles. Therefore every effort will be made to set the standard UV-cut processing is established. The need of UV-cut products will be known to the consumers.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.290.1-290.1
• /
• 2016

Grapehen, a single atomic layer of graphite, has been in the spotlight and researched in vaious fields, because its fine mechanical, electrical properties, flexibility and transparence. Synthesis methods for large-area graphene such as chemical vaper deposition (CVD) and mechanical, chemical exfoliation have been reported. In particular, chemical exfoliation method receive attention due to low cost process. Chemical exfoliation method require reduction of graphene oxide in the process of exfoliation such as chemical reduction by strong reductant, thermal reduction on high temperature, and optical reduction via ultraviolet light exposure. Among these reduction methods, optical reduction is free from damage by strong reductant and high temperature. However, optical reduction is economically infeasible because the high cost of short-wavelength ultraviolet light sorce. In this paper, we make graphene-oxide and lanthanoid ion mixture aqueous solution which has highly optical absorbency in selective wevelength region. Sequentially, we synthesize reduced graphene oxide (RGO) using the solution and visible laser beam. Concretely, graphene oxide is made by modified hummer's method and mix with 1 ml each ultraviolet ray absorbent Gd3+ ion, Green laser absorbent Tb3+ ion, Red laser absorbent Eu3+ ion. After that, we revivify graphene oxide by laser exposure of 300 ~ 800 nm layser 1mW/cm2 +. We demonstrate reproducibility and repeatability of RGO through FT-IR, UV-VIS, Low temperature PL, SEM, XPS and electrical measurement.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.392-396
• /
• 2014

New organic-inorganic composite of 2,4-dihydroxybenzophenone (BP-1) encapsulation into dodecylbenzenesulfonate (DBS) modified layered double hydroxide (LDH) was successfully prepared. The surface, structural, thermal and absorption properties of the BP-1/DBS-LDH nanohybrid was characterized by BET analysis, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TG) and diffuse reflectance UV-Vis absorbance spectra (DRUV-vis). The interlayer configuration of composite and the adsorption mechanism of BP-1 on MgAl-DBS-LDH were discussed. It was suspected that DBS anions located in the form of monolayer arrangement with a $75^{\circ}$ anti parallel angle between dodecylbenzenesulfonate chain axis. The diffuse reflectance UV-Vis absorbance results revealed that the UV absorbing wavelength of BP-1/DBS-LDH evidently extends to about 400 nm, which shows that the BP-1/DBS-LDH has the potential application as a UV absorber.