• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1485-1490
• /
• 2008

The effects of $\gamma$-irradiation on antioxidant and physicochemical properties of powder and 70% fermented ethanol extracts of Ishige okamurai (I. okamurai) were investigated. In case of powder, although yields were increased, there were no significant changes in total phenolic compounds (TPC) and 2,2-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging effect by $\gamma$-irradiation at 3, 7, and 20 kGy. In case of 70% fermented ethanol extracts, the results of TPC and DPPH radical scavenging effects showed no significant changes. However, antioxidant index increased in the 20 kGy irradiated I. okamurai extracts and decreased in 3 kGy irradiated ones. The optical density value of UV spectrum at 427 nm significantly decreased depending on increasing irradiation dosage. In conclusion, irradiated extracts of I. okamurai can be applied to the food industry due to irradiation stability on antioxidant properties. Also, irradiated extracts can be more useful for food processing as a result of a decrease of extracts color by irradiation.

• Radiation Oncology Journal
• /
• v.11 no.2
• /
• pp.369-376
• /
• 1993

226 patients with carcinoma of the uterine cervix treated with curative radiation therapy at the Department of Therapeutic Radiology, Dongsan hospital, Keimyung university, School of medicine, from July,1988 to May,1991 were evaluated. The patients with all stages of the disease were included in this study. The maximum and mean follow up durations were 60 and 43 months. The radiation therapy consisted of external irradiation to the whole pelvis (2700~4500 cGy) and boost parametrial doses (for a total of 4500~6300 cGy)with midline shild $(4{\times}10\;cm),$ and combined with intracavitary irradiation (5700~7500 cGy to point A). The distribution of patients according to the stage was as follows: stage IB 37 $(16.4\%),$ stage IIA 91 $(40.3\%),$ stage IIB 58 $(25.7\%),$ stage III 32 $(13.8\%),$ stage IV 8 $(3.5\%).$ The overall failure rate was $23.9\%$ (54 patients). The failure rate increased as a function of stage from $13.5\%$ in stage IB to $15.4\%$ in stage IIA, $25.9\%$ in stage IIB, $46.9\%$ in stage III, and $62.5\%$ in stage UV. The pelvic failure alone were 32 patients and 11 patients were as a components of other failure, and remaining 11 patients had distant metastasis only. Among the 43 patients of locoregional failure,28 patients were not controlled initially and in other words nearly half of total failures were due to residual tumor. The mean medial paracervical (point A) doses were 6700 cGy in stage IIB,7200 cGy in stage IIA,7450 cGy in stage IIB,7600 cGy in stage III and 8100 cGy in stage IV. The medial paracervical doses showed some correlation with tumor control rate in early stage of disease (stage Ib, IIA), but there were higher central failure rate in advanced stage in spite of higher paracervical doses. In advanced stage, failure were not reduced by simple increment of paracervical doses. To improve a locoregional control rate in advanced stages, it is necessary to give additional treatment such as concomitant chemoradiation.

• Analytical Science and Technology
• /
• v.29 no.3
• /
• pp.114-125
• /
• 2016

In this study, 165 wastewater discharge facilities in 10 business types were investigated with regard to 24 specific hazardous substances that included heavy metals, VOCs, CN, and phenol in the Gwangju city. Cu in the range from from 0.008 to 35.420 mg/L was detected in all business types and the detection rate was 46.8 %. Other heavy metals, such as Cd, As, Hg, Pb, and Cr⁺⁶ were detected as well. However, their detection rates ranged between 0.6 and 1.8 %. CN and phenol were detected in one and five facilities, respectively. 12 species of VOCs were detected: chloroform 80.6 % (0.42 to 81.60 μg/L), benzene 16.4 % (1.49 to 3.31 μg/L), trichloroethylene 11.5 % (1.78 to 6.02 μg/L), 1,1-dichloroethylene 10.3 % (1.23 to 5.89 μg/L), and dichloromethane 8.5 % (0.28 to 968.86 μg/L) in the detection rate order. The concentration of VOCs was detected in trace amounts, except for dichloromethane that exceeded the effluent quality standard in three business types, namely, metal manufacturing, food industry, and car washing facility. Chloroform was detected in all business types, where 24.88 μg/L were detected in the laundry business and 53.41 μg/L in the water supply business; the mean concentration of chloroform in these two business types was higher than elsewhere. Therefore, for the disposal of non-degradable specific hazardous substances in industrial wastewater, it is necessary to introduce physical and chemical processes, such as activated carbon adsorption, fenton oxidation, ozone treatment, as well as photocatalyst and the UV radiation.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.258-292
• /
• 1996

In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.176-184
• /
• 2018

In the present study, we investigated the antioxidative properties, cellular protective effects and component analyses of 50% ethanol extract, ethyl acetate fraction and aglycone fraction obtained from Lysimachia christinae Hance (L. christinae Hance). In the evaluation of antioxidative properties, the free radical scavenging activities ($FSC_{50}$) of 50% ethanol extract, ethyl acetate fraction and aglycone fraction were 146.8, 22.2 and $27.2{\mu}g/mL$, respectively and total antioxidant capacities ($OSC_{50}$) were 29.3, 2.9 and $4.5{\mu}g/mL$, respectively. The ethyl acetate fraction showed the highest free radical scavenging activity and total antioxidant capacity. Also, the cellular protective effects (${\tau}_{50}$) of 50% ethanol extract, ethyl acetate fraction and aglycone fraction on $^1O_2$ induced photohemolysis of human erythrocytes were 26.9, 57.5 and 103.9 min at $5{\mu}g/mL$, respectively. In particular, ${\tau}_{50}$ of the aglycone fraction exhibited a higher cellular protective effect than that of (+)-${\alpha}$-tocopherol (37.7 min). The cell viability of the ethyl acetate fraction on the UVB-induced cell damage increased up to 90.1%. In addition, the ethyl acetate fraction ($5-25{\mu}g/mL$) showed cellular protective effects on the $H_2O_2-induced$ cell damages in a dose-dependent manner. TLC, HPLC, UV-vis spectroscopy and LC-MS were used to analyse components of the ethyl acetate fraction and the main components were quercetin, kaempferol and their glycosides. In conclusion, L. christinae Hance extract/fraction can function as antioxidants to protect the skin exposed to UV radiation and may also be used as a novel functional cosmetic material, for example, an antioxidant against skin photoaging.

• Journal of Bio-Environment Control
• /
• v.10 no.3
• /
• pp.141-147
• /
• 2001

To compare to the optical and physical properties of covering materials for plastic greenhouse, EVA(ethylene vinyl acetate, 0.08 mm), polyorefine antifog (0.1 mm), fluoric (0.06 mm), diffused (0.15 mm), polyorefine antidrop (0.15 mm) and PET (polyethylene terephthalate, 0.5 mm) films were used. The small greenhouse (5.4$\times$18.5$\times$2.9 m, W$\times$L$\times$H) investigated during 3 years form 1997 to 1999. After covering materials were used for greenhouse covering during 30 months, UV (300-400 nm) transmittances of diffused film and PET were appeared from 25 to 26%, while those of fluoric film and the other films were 76% and from 63 to 67%. For PAR (photosynthetically active radiation, 400-700 nm), the transmittances of fluoric, antidrop, PET, antifog, EVA, and diffused film were 86.5%, 80.5%, 76.3%, 75.5%, 74.1% and 61.9% respectively. The losses of PAR transmittance of EVA and the antidrop film during period between 7 days and 30 months were higher value 12% and lower value 6% than any other film. Under the canopy of tomato plants, light intensities of the diffused film and the antifog film were 2.5 times and 1.4 times higher than those of PET. Tensile resistances of fluoric film at the break point were the higher than those of antifog film and diffused film. While impact resistance of the antidrop film was the highest value, but the fluoric film was the lowest. Air temperature inside the greenhouse for the day showed to be changed the similar light transmittance of the films. But the increasing order of air temperature for the night was PET, fluoric, antidrop, diffused, antifog and EVA film. Especially, air temperature in the PET was 4$^{\circ}C$ higher than that in the EVA. Solar radiations of the fluoric film, the antidrop film, PET and antifog film in the greenhouse were 32%, 15%, 11% and 4% higher than those of PET. However, those of the diffused film was 7% less than PET.

• KSBB Journal
• /
• v.18 no.3
• /
• pp.211-216
• /
• 2003

The removal yield of dissolved organic matter in drinking water by biological activated carbon (BAC) process was investigated. The tested processes wer raw water-AC process (BAC1), raw water-ozonation-BAC process (BAC2), and raw water-ozonation-coagulation/sedimentation-BAC process (BAC3). The amounts of organic matter was measured as dissolved organic carbon (DOC), ulta-violet radiation at 254 nm wavelength ($UV_{254}$), total nitrogen (T-N), ammonia nitrogen (NH_3$-N), and total phosphate (T-P). As a results, 30.7% DOC was removed by BAC2 process, which showed higher removal efficiency than BAC1 or BAC3 processes. The removal yield of $UV_{254}$ in BAC1, BAC2, and BAC3 processes were observed as 45.3%, 44.6%, 58.4%, respectively. And the removal yield of ammonia nitrogen were 66%, 81%, 29% in each BAC processes. The optimal empty bed contact time (EBCT) of BAC processes was estimated as 10 minute. This study has shown that BAC process combined with ozone treatment was efficient for removing dissolved organic matter in water.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2005

The purpose of this study was to evaluate the potential of a gamma irradiation to decompose 2,4,6-trinitrotoluene(TNT) in an aqueous solution. The decomposition reaction of TNT by gamma irradiation was a pseudo first-order kinetic over the applied initial concentrations($25{\sim}100mg/L$). The dose constant was strongly dependent on the initial TNT concentration. The removal of TNT was more efficient at pH below 3 and at pH above 11 than at neutral pH(pH 5-9). The required irradiation dose to remove over 99% of TNT was 40, 80 and 10 kGy, individually at pH 2, 7 and 13. The dose constant was increased by 1.6 fold and over 15.6 fold at pH 2 and 13, respectively, when compared with that at pH 7 When irradiation dose of 200 kGy was applied, the removal efficiencies of TOC were 91, 46 and 53% at pH 2, 7 and 13, respectively. Ammonia and nitrate were detected as the main nitrogen byproducts of TNT and glyoxalic acid and oxalic acid were detected as organic byproducts. The results showed that a gamma irradiation was an attractive method for the decomposition of TNT in an aqueous solution. However, regarding the application of high energy radiation for the TNT decomposition and mineralization, an application of an acidic pH below 3 to the solution before irradiation should be considered.

• Research in Plant Disease
• /
• v.18 no.4
• /
• pp.354-360
• /
• 2012

This study tested the antifungal compound obtained from a medicinal plant, Dioscorea quinqueloba Thunb., in order to search the possibility of practical application of this product in agriculture through evaluating its activity using the citrus fruits. The extract of D. quinqueloba Thunb., which has the strongest antifungal activity, was selected as a candidate among 101 plant extracts. Based on this examination concerning antifungal activity of the product on Penicillium digitatum in vitro, it was confirmed its effect of mycelial growth inhibition showed over 87% at 0.5 mg/ml concentration. This natural product showed the stability of the substance, as it was not significantly influenced by pH, temperature, or ultraviolet radiation. While citrus fruits were stored at room temperature, P. digitatum was inoculated into them in order to prepare a similar environmental conditions with epidemic occurrence of the mold. As the result of our investigation, the disease preventive effects of the active antifungal substance evidenced a 100% at 0.5 mg/ml. When the phytotoxicity of the selected natural product on citrus at 2 mg/ml was assessed, we noted no toxic effects. Based on the superior preventive effects from this natural product extracted from the plant, it is presumed to be very useful in agricultural applications for the control of green mold, P. digitatum, which has been occurred often the biggest problem in the storage of citrus fruits.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.3
• /
• pp.263-273
• /
• 2012

Recent studies have uncovered attractive properties of para-coumaric acid (PCA) as a potential skin hywhitening agent. The purpose of the current study was to examine its UVB-shielding effects. Effects of PCA on the viability of HaCaT cells exposed to UVB were assessed in vitro in comparison with other aromatic amino acid metabolites that have similar UV absorption spectra. For in vivo test, PCA cream (1.5 %) and cream base were topically applied to the dorsal skin of SKH-1 hairless mice and the inflammatory responses due to UVB exposure were monitored by changes in skin color (erythema) and thickness (edema). The cream application-UVB exposure regimen was repeated every other day for a total of 12 sessions. When HaCaT cells were irradiated with UVB, there was a dose-dependent decline in cell viability. The cell viability decline due to UVB exposure (10 mJ $cm^{-2}$) was significantly prevented by 100 ${\mu}M$ PCA, cinnamic acid, urocanic acid, or indole acrylic acid by 39, 27, 39, or 31 %, respectively. Topical application of PCA cream onto the dorsal skin of hairless mice (10 ${\mu}g\;cm^{-2}$) attenuated the changes of color parameters, $L^*$, $a^*$, $b^*$ values, and thickness of the UVB (150 mJ $cm^{-2}$)-exposed skin by 59, 50, 58, and 53 %, respectively. The current study, together with the previous studies that demonstrated the antimelanogenic effects of PCA, suggested that PCA may prevent not only dyspigmentation but also inflammatory reactions in the UVB-exposed skin.