• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.445-449
• /
• 2015

This study was directed to finding an optimum extraction condition of genistein from the S. flavescens with supercritical carbon dioxide as a solvent. In this effort, effects of the extraction conditions including pressure, temperature and a co-solvent on the extraction efficiency were investigated. The aqueous ethanol and methanol solutions were used as co-solvents while the tested operating pressure and temperature ranges were from 200 bar to 300 bar and from 308.15 K to 323.15 K, respectively. The concentration of genistein was determined by means of HPLC equipped with a UV detector. From the results, it was observed that an increase in pressure led to the higher extraction efficiency. Further, methanol showed better performance as a co-slovent than ethanol. The DPPH radical scavenging activities were measured to compare antioxidant activities of S. flavescens extracts.

• Korean Journal of Materials Research
• /
• v.30 no.9
• /
• pp.489-494
• /
• 2020

SiC is a material with excellent strength, heat resistance, and corrosion resistance. It is generally used as a material for SiC invertors, semiconductor susceptors, edge rings, MOCVD susceptors, and mechanical bearings. Recently, SiC single crystals for LED are expected to be a new market application. In addition, SiC is also used as a heating element applied directly to electrical energy. Research in this study has focused on the manufacture of heating elements that can raise the temperature in a short time by irradiating SiC-I₂ with microwaves with polarization difference, instead of applying electric energy directly to increase the convenience and efficiency. In this experiment, Polydimethylsilane (PDMS) with 1,2 wt% of iodine is synthesized under high temperature and pressure using an autoclave. The synthesized Polycarbosilane (PCS) is heat treated in an argon gas atmosphere after curing process. The experimental results obtain resonance peaks using FT-IR and UV-Visible, and the crystal structure is measured by XRD. Also, the heat-generating characteristics are determined in the frequency band of 2.45 GHz after heat treatment in an air atmosphere furnace.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.4
• /
• pp.182-185
• /
• 2005

Bioassay-guided isolation of the dried roots of Aralia continentalis led to the isolation of (-)-pimara-8(14), 15dien-19-oic acid (continentalic acid) and $(24E)-Stigmasta-5,22-dien-3{\beta}-ol$ (stagmasterol). Their structures were elucidated using $^1H-NMR$, $^{13}C-NMR$, UV and mass spectra analyses. The gram-positive bacterial, including methicilline-resistant (MRSA), were more sensitive to the continentalic acid and stagmasterol than gram-negative bacterial.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.17 no.1
• /
• pp.16-33
• /
• 2004

In Oriental medicine, aging is just a natural process like change of seasons. Ancient Oriental people accepted it as a natural thing to be growing older and to die at last. The science of aging has advanced dramatically. In the last 2 decades, advances in genetics and molecular biology have led to extraordinary new understandings in how cells age, how apoptosis programs cells to die, and how neuroendocrinology plays a role in the lifespan of organisms. Today, the matter of primary concern about aging is a cellular and mitochondrial damage of human body induced by reactive oxygen species(ROS). The skin aging can be divided into two areas, intrinsic(chronologic)-aging and photo-aging. There are lots of photo damage about skin aging. The skin is increasingly exposed to ultraviolet(UV) irradiation in life. Therefore, the risk of photo-oxidative damage of the skin induced by reactive oxygen species(ROS) has increased substantially. Nowadays, many people believe that they can stop or at least delay the process of aging. There are lots of treatments that promise to slow the process of aging and the associated ailments. Many of these treatments, for example, exercise, Vit E, Vit C therapy, hormone therapy, restrict diet, are gradually being subjected to clinical trials. But in spite of all efforts, researches and investigations, there is no single method or treatment which is revealed to be truly effective for delaying progress of aging. Every methods insisted on effect for delaying aging process, has its dark side. All we can do is just keeping ourself healthy until the time of death.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.105-124
• /
• 2011

TFT-LCD consists of LCD panel on the top, circuit unit on the side and BLU on the bottom. The recent development issues of BLU-dependent TFT-LCD have been power consumption minimization, slimmerization and size maximization. As a result of this trend, LED is adopted as BLU instead of CCFL to increase brightness and to reduce thickness. In liquid crystal displays, the light efficiency is below 10% due to the loss of light in the path from a light source to an LCD panel and presence of absorptive polarizer. This low efficiency results in low brightness and high power consumption. One way to circumvent this situation is to use a reflective polarizer between backlight units and LCD panels. Since a nano-wire grid polarizer has been known as a reflective polarizer, an idea was proposed that it can be used for the enhancement of the brightness of LCD. The use of reflective polarizing film is increasing as edge type LED TV and 3D TV markets are growing. This study has been carried out to fabrication of the nano-wire grid polarizer(NWGP) and investigated the brightness enhancement of LCD through polarization recycling by placing a NWGP between an c and a backlight unit. NWGPs with a pitch of 200nm were fabricated using laser interference lithography and aluminum sputtering and wet etching. And The NWGP fabrication process was using by the UV imprinting and was applied to plastic PET film. In this case, the brightness of an LCD with NWGPs was 1.21 times higher than that without NWGPs due to polarization recycling.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.5
• /
• pp.211-217
• /
• 2015

To fabricate white LED having a high color rendering index value, red color phosphor mixed with the green color phosphor together in the blue chip, namely the blue chips with RG phosphors packaging is most favorable for high power white LEDs. In our previous papers, we reported on successful syntheses of $Sr_{2-}$ $Si_5N_8:Eu^{2+}$ and $CaAlSiN_3$ phosphors for red phosphor. In this work, for high power green phosphor, greenemitting ternary nitride $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphor was synthesized in a high frequency induction furnace under $N_2$ gas atmosphere at temperatures up to $1400^{\circ}C$ using $EuF_3$ as a raw material for $Eu^{2+}$ dopant. The effects of molar ratio of component and experimental conditions on luminescence property of prepared phosphors have been investigated. The structure and luminescence properties of prepared $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphors were investigated by XRD and photoluminescence spectroscopy. The excitation spectra of $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphors indicated broad excitation wavelength range of 250 - 500 nm, namely from UV to blue region with distinct enhanced emission spectrum peaking at ${\approx}530nm$.

• Journal of Animal Science and Technology
• /
• v.51 no.6
• /
• pp.527-536
• /
• 2009

A potent protein degrading bacterium was isolated from soil samples of different environments. Polyphasic taxonomic studies and phylogenetic 16S rRNA sequence analyses led to identify the isolate IB No. 11 as a strain of Bacillus subtilis. The isolated strain was recognized to produce protease constitutively, and the maximum production (1.64 units/ml) was attained in a shake flask culture when the isolate was grown at $40^{\circ}C$, for 32 h in basal medium supplemented with starch (0.25%) and gelatin (1.25%) as sole carbon and nitrogen source, respectively. The optimum pH and temperature for the protease activity were determined to be pH 7.0 and $50^{\circ}C$, respectively. $Ca^{2+}$ and $Mn^{2+}$ enhanced remarkably the protease activity but neither showed positive effect on the protease's thermal stability. In addition, it was observed that the protease was fairly stable in the pH range of 6.5-8.0 and at temperatures below $50^{\circ}C$, and it could be a good candidate for an animal feed additive. The inhibition profile of the protease by various inhibitors indicated that the enzyme is a member of serine-proteases. A combination of UV irradiation and NTG mutagenesis allowed to develop a protease hyper-producing mutant strain coded as IB No. 11-4. This mutant strain produced approximately 3.23-fold higher protease activity (6.74 units/mg) than the parent strain IB No. 11 when grown at $40^{\circ}C$ for 32h in the production medium. The protease production profile of the selected mutants was also confirmed by the zymography analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.174-174
• /
• 2010

Gallium Nitride(GaN) attracts great attention due to their wide band gap energy (3.4eV), high thermal stability to the solid state lighting devices like LED, Laser diode, UV photo detector, spintronic devices, solar cells, sensors etc. Recently, researchers are interested in synthesis of polycrystalline and amorphous GaN which has also attracted towards optoelectronic device applications significantly. One of the alternatives to deposit GaN at low temperature is to use Single Source Molecular Percursor (SSP) which provides preformed Ga-N bonding. Moreover, our group succeeds in hybridization of SSP synthesized GaN with Single wall carbon nanotube which could be applicable in field emitting devices, hybrid LEDs and sensors. In this work, the GaN thin films were deposited on c-axis oriented sapphire substrate by MBE (Molecular Beam Epitaxy) using novel single source precursor of dimethyl gallium azido-tert-butylamine($Me_2Ga(N_3)NH_2C(CH_3)_3$) with additional source of ammonia. The surface morphology, structural and optical properties of GaN thin films were analyzed for the deposition in the temperature range of $600^{\circ}C$ to $750^{\circ}C$. Electrical properties of deposited thin films were carried out by four point probe technique and home made Hall effect measurement. The effect of ammonia on the crystallinity, microstructure and optical properties of as-deposited thin films are discussed briefly. The crystalline quality of GaN thin film was improved with substrate temperature as indicated by XRD rocking curve measurement. Photoluminescence measurement shows broad emission around 350nm-650nm which could be related to impurities or defects.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.119-119
• /
• 1999

GaN-based 물질들은 blue와 UV 영역의 LED, LD와 같은 광소자가 상용화되었을 뿐만아니라 HBT, FET와 같은 전기소자로도 널리 응용될 시점이지만 아직까지 해결되지 않은 문제점들이 있다. 그 중에 하나가 바로 GaN의 격자상수와 일치하는 기판이 없어 발생하는 dislocation인데, 이를 해결하기 위한 방법으로 새로운 기판이나, buffer, 또는 새로운 성장방법(ELOG) 등을 시도하고 있으나 dislocation density는 아직 높은 (107~1010cm-2) 상태이다. 이에 본 연구에서는 dislocation을 줄이기 위한 방책으로 InxGa1-xN를 새로운 buffer층으로 사용하여 GaN 박막을 MBE 방법으로 성장하였다. InxGa1-xN를 선택한 이유는 GaN와의 격자상수차이가 In0.12Ga0.88N일 경우 거의 일치한다는 보고가 있으며, 특히 InGaN의 melting point는 GaN의 성장온도 보다는 약간 높기 때문에 GaN 박막을 성장할 때와 식힐 때의 InGaN 원자결합은 약하게 작용되며, 결국 이는 열적인 stress를 줄여주게 된다. 이와 같이 성장된 GaN 박막은 그 결정성을 XRD로 분석하였고, 표면과 계면을 SEM으로 관찰하였다. 그리고 그 광학적 특성을 저온 PL로서 조사하였다. 그 결과를 살펴보면 35$^{\circ}$ 근방에서 GaN(0002) peak가 나온 것으로 보아 wurtzite 구조가 성장됨을 XRD로부터 확인하였다. 그리고 저온 (12K) PL에서는 3.470eV의 D$^{\circ}$X peak뿐만 아니라 3.258eV에 해당하는 peak를 얻었는데, 이는 InxGa1-xN buffer layer의 vapour pressure가 높은 (<50$0^{\circ}C$)에 도달하게 됨으로써 dissociation이 일어나면서 초기 성장이 이루어졌고 이는 다시 계면에서의 inter-diffusion을 발생시킨 것으로 보여진다.

• Korean Journal of Materials Research
• /
• v.15 no.6
• /
• pp.419-425
• /
• 2005

In this paper, we describe the luminescent properties of the phosphors synthesized via sol-gel technique. When the phosphor prepared by sol-gel technique, reaction factors, such as pH condition, $R_w$ and drying temperature affected the luminescent intensity, particle size and morphology of final product. Therefore, we attempt to control these reaction factors in order to improve the luminescent efficiency of phosphors. As a result of our study, when the acid catalyst (HCl) was used, emission intensity was higher than the case of base catalyst $(NH_4OH)$. The product prepared at $R_w=60$ indicated the maximum intensity. As the increase of the $R_w$ value, the particle was agglomerated and emission intensity was decreased. Finally, optimum drying temperature of gel was found to be$ 180^{\circ}C$.