• Journal of Sensor Science and Technology
• /
• v.18 no.4
• /
• pp.307-310
• /
• 2009

This paper describes the formation of porous 3C-SiC by anodization. 3C-SiC thin films were deposited on p-type Si(100) substrates by APCVD using HMDS(Hexamethyildisilane: $Si_2(CH_3)_6$). UV-LED(380 nm) was used as a light source. The surface morphology was observed by SEM and the pore size was increased with increase of current density. Pore diameter of 70 $\sim$ 90 nm was achieved at 7.1 mA/cm$^2$ current density and 90 sec anodization time. FT-IR was conducted for chemical bonding of thin film and porous 3C-SiC. The Si-H bonding was observed in porous 3C-SiC around wavenumber 2100 cm$^{-1}$. PL shows the band gap enegry of thin film(2.5 eV) and porous 3C-SiC(2.7 eV).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.3
• /
• pp.266-274
• /
• 2023

Recently, sterilization technology has received increasing interest due to the COVID-19 pandemic and required safety precautions. Particularly, sterilization devices using near ultraviolet (UV) with a 405 nm wavelength are also drawing attention. It has a UV-C wavelength and other sterilization effects. Its blue-colored light on the boundary between UV and visible light is used as a light-emitting diode (LED) lamp for 405 nm sterilization, owing to its longer wavelengths than UV rays. However, the 405 nm wavelength contains blue light that can damage the eyes and skin during prolonged exposures and affect the emotional and biological parts of the body. Currently, 405 nm sterilization LED light registers are circulating in the market. However, they have not undergone safety tests for blue-light hazards. Thus, with the active distribution of sterilization LED lights, solid safety standards and management systems are essential to protect users from blue-light hazards. Accordingly, in this study, we conducted spectral radiance and spectral radiative luminance tests on 405 nm sterilization LED registers available in the market by the measurement criteria of IEC 62471. Safety standards must be established to secure users' safety against blue light hazards at a time when 405nm sterilization LED lights are actively distributed due to COVID-19.

• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.596-606
• /
• 2016

The growth and contents of anthocyanins and ascorbic acid in lettuce(Lactuca sativa L., 'Jeokchima') as affected by supplemental UV-A LED irradiation under different light quality and photoperiod conditions were analyzed in this study. Five light qualities, namely B (blue LED), R (red LED), BUV (blue LED+UV-A LED), RUV (red LED+UV-A LED) and Control (white fluorescent lamps) with photoperiods of 12/12 hours (day/night), 16/8 hours, or 20/4 hours were provided to investigate the effects of light quality and photoperiod on the growth and accumulation of anthocyanins and ascorbic acid in lettuce leaves. As measured 28 days after transplanting, the number of leaves, leaf length, leaf width, leaf area, shoot fresh weight and dry weight of lettuce were significantly affected by light quality and photoperiod. The number of leaves, leaf length, leaf width, leaf area, shoot fresh weight and dry weight of lettuce grown under R treatment increased with increasing light period. By contrast, leaf development was inhibited, but chlorophyll content increased, under B treatment. Supplemental UV-A irradiation significantly decreased leaf length, leaf width, leaf area and shoot fresh weight. Anthocyanins in lettuce increased significantly with decreasing dark period under B treatment. A synergistic effect of supplemental UV-A LED irradiation on anthocyanins accumulation was found for lettuce leaves grown under R treatment but not B treatment. Ascorbic acid in lettuce was greatly affected by photoperiod. Ascorbic acid content at BUV and RUV treatments increased by 20-30% compared to without UV-A LED irradiation. From these results, it was concluded that growth and contents of anthocyanins and ascorbic acid in lettuce are significantly affected by supplemental UV-A LED irradiation. The results obtained in this study will be informative for efforts to improve the nutritional value of leafy vegetables grown in plant factories.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.433-436
• /
• 2018

A total internal reflection (TIR) linear lens of size $190(W){\times}5(D){\times}2.1(H)mm^3$ has a directivity of $25^{\circ}$ and was made of a polydimethysiloxane (PDMS) silicone resin with a refractive index of 1.4 and a transmittance of 93% at 365 nm UV wavelength. A light source with a size of $190{\times}25.5mm^2$ was fabricated by installing a TIR linear lens on a chip on board (COB) type LED module mounted with a $1.1{\times}1.1mm^2$ size UV LED. The optical characteristics of the light source showed a maximum irradiation density of $3,840mW/cm^2$ at a working distance of 5 mm and a high uniformity of 91.6% over a $150{\times}25mm^2$ irradiation area. The thermal characteristics of the light source were measured at a supply current of 500 mA. The saturation temperature was reached after 30 min of operation, and measured to be $95^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.276-282
• /
• 2019

The purpose of this study was to analyze the structure of general filter using ultrafine filter (Profilter), dust collector filter, HEPA (HAPA-High Efficiency Particulate Air) filter, deodorized filters, etc. of air purifiers and to study new types of purified filters that can improve ultrafine dust, harmful gases, and sterilization cleanup performance. The study was also conducted by adding photocatalyst filters to the existing step-by-step filtration filter types, which were proposed in the design three coupling structure filters of the left and right UV-LED installation frames and the photocatalyst coating honeycomb frame. Future research is needed on the effect of photocatalyst filters. This study was to investigate the application and structure of photocatalyst filters to air purifiers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.135-140
• /
• 2014

Pre-storage ultra-violet (UV) light treatment on fresh produce is known to inactivate the contaminated microorganisms, activate the defense system, and delay ripening extending the shelf life. As UV light emitting diode (LED) becomes available at a relatively low price, continuous or intermittent UV treatment during chilled storage is possible in a container or package. This study attempted an in situ UV LED treatment on fresh produce stored under a refrigerated container in order to see its potential in the fresh produce storage and further optimize its application conditions. The effect of in-container UV LED irradiation on the quality preservation of shredded carrots was investigated in the air and modified atmosphere (MA) conditions. Two sets of experiment with Escherichia coli inoculation and with natural microbial flora in the air (two 30 minute on-off cycles of 1 $diode/dm^2$ per day at a location above 2 cm) showed a clear and significant effect of the UV LED irradiation on the suppression of microbial growth: 280 nm was the most effective by maintaining a lower microbial count by at least 0.5 log (CFU/g) throughout the 6 day storage period. The carotenoids content of shredded carrots subjected to UV LED treatment at 365 and 405 nm in the air was higher than that of the control shredded carrots. In MA condition of $O_2$ of 1.2~4.3% and $CO_2$ of 8.4~10.6% being indifferent with LED wavelengths, 280 nm UV LED irradiation was also effective in inhibiting the microbial growth. While there was no observed difference in the carotenoids content between untreated and UV LED-treated shredded carrots in MA, UV LED irradiation at 365 and 405 nm was slightly better in DPPH radical scavenging activity. The use of UV LED in storage container or package seems to give the benefits of preserving the microbial and nutritional qualities of minimally processed fruits and vegetables.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.1
• /
• pp.86-92
• /
• 2019

Although perylene bisimide derivatives have advantages such as excellent thermal stability and high luminance efficiency, they have poor solubility characteristics in organic solvents. In this research, in order to improve the solubility characteristics, we prepared perylene bisimide derivatives (1C) and (2C) with swallow-tail substituted imide, which is known to lead to excellent solubility. The structures and properties of swallow-tail perylene bisimide (1C) and (2C) were analyzed by $^1H-NMR$, FT-IR, UV/Vis spectroscopy, and thermogravimetric analysis (TGA). The maximum absorption wavelengths of (1C) and (2C) in the UV/Vis spectrum were 558 nm and 556 nm, respectively, and the maximum emission wavelengths were 602 nm and 600 nm, respectively. In the TGA, (1C) demonstrated good thermal stability with less than 5 wt% weight loss up to $242^{\circ}C$. In the solubility test, (1C) and (2C) exhibited solubilities of more than 5 wt% in chloroform, ethyl acetate, and dimethylformamide, but not in methanol. When the compounds (1C) and (2C) were mixed with PMMA (polymethyl methacrylate), thin films showed peaks at 679 nm and 677 nm, respectively, in the photoluminescence spectra. (1C) was found to be a possible candidate as red organic phosphor for hybrid LEDs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.351-352
• /
• 2012

UV LED에서 p-GaN층의 높은 일함수와 자체 면저항이 크기 때문에 current spreading layer인 ITO (indium tin oxide) 투명전극이 사용되고 있다. 따라서 높은 UV 파장대 투과율과 낮은 면 저항이 매우 중요하다. 본 연구에서, RF magnetron sputter를 사용하여 ITO 투명전극을 glass(boro33)에 120 nm 두께로 증착하였다. 그 후 RTA (rapid thermal annealing)을 이용해 120초 동안 $600^{\circ}C$에서 Air, $N_2$ (15 sccm), vacuum 환경에서 열처리를 하여 UV-Vis-NIR spectrophotometer를 사용해 ITO 박막의 투과율을 측정하고, Hall measurement system을 이용하여 전기적 특성을 측정하였다. Fig. 1과 같이 열처리 환경에 따라 ITO 박막의 투과율이 변하고 또한 Table 1과 같이 전기적 특성도 변함을 알 수 있었다. Air 환경에서의 열처리는 reference 샘플과 비교 했을 때 400 nm 이하의 파장에서 투과율이 증가하였지만 400 nm 이상의 파장에서는 투과율이 낮아짐을 볼 수 있고, 면 저항 (Ohm/sq)은 오히려 reference (as deposited) 샘플과 비교하여 24 Ohm/sq 증가하는 것을 알 수 있었다. 반면에 $N_2$, vacuum 환경에서 열처리는 reference (as deposited) 샘플 보다 380 nm 파장대에서 16% 정도 높은 투과율을 보였고, 면저항 역시 2배 이상 낮아졌다. 둘 다 비슷한 투과율과 면저항을 나타내었지만 vacuum 환경이 좀 더 우수한 광학적 특성을 나타내었고 반면에 $N_2$ 환경은 좀 더 낮은 면저항을 나타내었다. ITO 박막을 증착한 후 vacuum 환경에서 열처리를 통하여 제작된 UV-LED (중심 파장 380 nm)가 Fig. 2와 같이 입력 전류 450 mA에서 광출력이 46% 정도 향상 되었고 안정된 I-V 특성 보였다.

• Journal of Sensor Science and Technology
• /
• v.16 no.1
• /
• pp.7-10
• /
• 2007

A thick film catalytic gas sensors which can be operated at $142^{\circ}C$ in presence of ultra violet-light emitting diode has been developed to measure hydrogen concentration in 0-5 % range. The sensing material as a combustion catalyst consists of $TiO_{2}$ (5 wt%) and Pd/Pt (20 wt%) supported on $Al_{2}O_{3}$ powder and the reference material to compensate the heat capacity of it in a bridge circuit was an catalyst free $Al_{2}O_{3}$ powder. Platinum heater and sensor materials were formed on the alumina plate by screen printing method and heat treatment. The effect of UV radiation in the presence of photo catalyst $TiO_{2}$ on the sensor sensitivity, response and recovery time has been investigated. The reduction of operating temperature from $192^{\circ}C$ to $142^{\circ}C$ for hydrogen gas sensing property in presence of UV radiation is attributed to the hydroxy radical and superoxide which was formed at the surface of $TiO_{2}$ under UV radiation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.1
• /
• pp.48-53
• /
• 2017

We report the studies on the red organic phosphor by using perylene bisimide derivatives. Even though perylene bisimide derivatives have excellent thermal stability and luminous efficiency, they have low solubility in organic solvents. In this research, modified perylene bisimide derivative, N,N'-Bis(4-bromo-2, 6-diisopropylphenyl)-1, 6, 7, 12-tetraphenoxyperylene-3, 4, 9, 10-tetracarboxyl bisimide (1C), has been prepared by the reaction of phenol with N,N'-Bis(4-bromo-2, 6-diisopropylphenyl)-1, 6, 7, 12-tetrachloroperylene-3, 4, 9, 10-tetracarboxyl bisimide (1B) in presence of DMF, at $70^{\circ}C$. The synthesized (1C) was characterized by using $^1H-NMR$, FT-IR, UV/V is spectroscopy, and TGA. The absorbtion and emission of (1C) was shown at 576 nm and 610 nm in UV/V is spectrum. In TGA thermogram, (1C) showed good thermal stability without significant weight loss to $220^{\circ}C$. And in the solubility analysis, (1C) with phenoxy group showed the good solubility in general organic solvents. The blended films of (1C) with PMMA (polymethyl methacrylate) at different weight % concentration such as 10, 5, 1 weight % have been prepared. The blended film was shown at 616 nm when monitored at 450 nm in PL emission spectra.