• Journal of Korean Society of Environmental Engineers
• /
• 제39권1호
• /
• pp.9-18
• /
• 2017

Arsenic (As) has been considered as the most toxic one among various hazardous materials and As contamination can be caused naturally and anthropogenically. Major forms of arsenic in groundwater are arsenite [(As(III)] and/or arsenate [(As(V)], depending on redox condition: arsenite and arsenate are predominant in reduced and oxidized environments, respectively. Because arsenite is much more toxic and mobile than arsenate, there have been a number of studies on the reduction of its toxicity through oxidation of As(III) to As(V). This study was initiated to develop photocatalytic oxidation process for treatment of groundwater contaminated with arsenite. The performance of two types of light sources (UV lamp and UV LED) was compared and the feasibility of goethite as a photocatalyst was evaluated. The highest removal efficiency of the process was achieved at a goethite dose of 0.05 g/L. Based on the comparison of oxidation efficiencies of arsenite between two light sources, the apparent performance of UV LED was inferior to that of UV lamp. However, when the results were appraised on the basis of their emitting UV irradiation, the higher performance was achieved by UV LED than by UV lamp. This study demonstrates that environmentally friendly process of goethite-catalytic photo-oxidation without any addition of foreign catalyst is feasible for the reduction of arsenite in groundwater containing naturally-occurring goethite. In addition, this study confirms that UV LED can be used in the photo-oxidation of arsenite as an alternative light source of UV lamp to remedy the drawbacks of UV lamp, such as long stabilization time, high electrical power consumption, short lifespan, and high heat output requiring large cooling facilities.

• Korean Journal of Materials Research
• /
• 제21권5호
• /
• pp.273-276
• /
• 2011

Ultraviolet (UV) light emitting diodes (LEDs) were grown on a patterned n-type GaN substrate (PNS) with 200 nm silicon-di-oxide (SiO2) nano pattern diameter to improve the light output efficiency of the diodes. Wet etched self assembled indium tin oxide (ITO) nano clusters serve as a dry etching mask for converting the SiO2 layer grown on the n-GaN template into SiO2 nano patterns by inductively coupled plasma etching. PNS is obtained by n-GaN regrowth on the SiO2 nano patterns and UV-LEDs were fabricated using PNS as a template. Two UV-LEDs, a reference LED without PNS and a 200 nm PNS UV-LEDs were fabricated. Scanning Electron microscopy (SEM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), Photoluminescence (PL) and Light output intensity- Input current- Voltage (L-I-V) characteristics were used to evaluate the ITO-$SiO_2$ nanopattern surface morphology, threading dislocation propagation, PNS crystalline property, PNS optical property and UVLED device performance respectively. The light out put intensity was enhanced by 1.6times@100mA for the LED grown on PNS compared to the reference LED with out PNS.

• Food Science and Preservation
• /
• 제19권5호
• /
• pp.645-651
• /
• 2012

The food functional properties of Pleurotus eryngii cultivated with different wavelengths of light-emitting diode (LED) light were analyzed in this study. The levels of total soluble solids of Pleurotus eryngii increased with all the LED lights, except mixed LED light ($B^*R$, $B^*G$ and $R^*G$). Thirty one kinds of components were detected by analyzing the free amino acids. The total free amino acid contents had a slightly higher tendency in the control group, but the ratios of eight essential amino acids among the total amino acids of Pleurotus eryngii cultivated under all the LED lights, including the blue light (blue, $B^*R$, $B^*G$ and $B^*R^*G^*U$) and the green light, were higher than that in the control group. K was the highest-content of mineral, and Mn was the lowest-content. The Ca content increased through cultivation under all the LED lights, except the blue light, but the Fe content (under the green and $B^*R$ lights), K content (under the red and UV-A lights) and Mg content (under the $R^*G$, UV-A and red lights) increased under the exclusive LED light. The total phenolic compounds increased by cultivation under all the LED lights, except the UV-A and mixed lights ($R^*G$ and $B^*R^*G^*U$). The DPPH radical scavenging activity was also improved by all the LED lights, except the mixed light ($R^*G$).

• Current Optics and Photonics
• /
• 제3권4호
• /
• pp.336-341
• /
• 2019

This paper proposes an optical system where the organic compound content in water is determined by using an ultraviolet (UV) LED (280 nm) and photodetector. The results obtained by the proposed prototype LED spectroscopy system, which includes a single photodetector and two parallel sample holders, are calculated by applying partial least square regression; the values are highly correlated with the actual concentrations of potassium hydrogen phthalate solutions, with an adjusted coefficient of determination about 0.996. Moreover, the total organic carbon values derived from the UV-Vis spectrometer of real samples (lake, river and sea water) differed little from those obtained by the LED spectroscopy. We confirm that the fast, sensitive, and compact LED sensor system can be readily configured for real-time monitoring of organic compounds in water.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.32-35
• /
• 2006

For the white UV-LED applications, $Eu^{2+}$-activated calcium aluminium silicate phosphors were synthesized for the first time and the structures and luminescence characteristics of these phosphors were investigated. The phosphors in this study emitted blue. green or blue-green light depending on the starting materials for synthesis. In addition, the structure was also changed when the different starting materials were used. When CaO and $CaCO_3$ was used as a starting material. tetragonal $Ca_2Al_2SiO_7$ was formed and blue-green and pure green light was emitted. respectively. However. in the case of $CaSiO_3$, triclinic $CaAl_2Si2O_8$ was formed and only pure blue emission was detected. The maximum emission intensity was obtained from $CaAl_2Si_2O_8:Eu^{2+}$ phosphors, which intensity was about 1.4 times higher than that of YAG:$Ce^{3+}$ phosphor used for blue LED.

• Korean Journal of Optics and Photonics
• /
• 제25권4호
• /
• pp.216-220
• /
• 2014

We have synthesized a $CaMgSi_2O_6:Eu^{2+}$ blue phosphor via a solid-state reaction method. The $CaMgSi_2O_6:Eu^{2+}$ phosphor has monoclinic structure with a space group of C2/c (15), and an emission band peaking at 450 nm (blue) due to the $4f^7-4f^65d$ transition of the $Eu^{2+}ion$. The emission intensity at $100^{\circ}C$ is 54% of the value at room temperature. A white LED was fabricated by integrating a UV LED (400 nm) with our blue phosphor plus two commercial green and red phosphors. The white LED shows a color temperature of 3500 K with a color rendering index of 87 (x = 0.3936, y = 0.3605), and a luminous efficiency of 18 lm/W. The white LED shows a luminance maintenance of 97% after operation at 350 mA for 400 hours at $85^{\circ}C$.

• Clean Technology
• /
• 제16권2호
• /
• pp.88-94
• /
• 2010

The physiological roles of various wavelength of light emitting diode (LED) on ‘Hayward’ kiwifruit experiencing after-ripening were investigated. Various wavelengths from LED light source were irradiated on kiwifruits kept in plastic bags or under open air at $25^{\circ}C$. During two weeks of storage, firmness of Hayward kiwifruits was decreased by $25^{\circ}C$ treatment than by $4^{\circ}C$ treatment. In the $25^{\circ}C$ storage condition, the firmness of kiwifruits was decreased by the treatment of 380 nm UV and 470nm white LED light source. Sweetness of kiwifruits treated with 380 nm UV LED and dark condition at $25^{\circ}C$ increased higher than $15^{\circ}$Brix. The acidity of kiwifruits under open air was decreased 52% by incubating at $25^{\circ}C$ with 660 nm red LED treatment. The acidity of kiwifruits in plastic bags was decreased 52.6, 55.6, 52.8% by the treatment of 440 nm blue, 470 nm white and 660 nm red LED light source, respectively, compared to that of kiwifruits incubated in darkness at $25^{\circ}C$. Decreased acidity irradiated by 660 nm red LED light source can be applied for regulating periods of the kiwifruit after-ripening process. LED light sources emit very narrow wavelength with a power-saving mode, therefore, the usage of these LED light source for regulating the after-ripening process can be classified as a clean biotechnology producing safe and environment-friendly kiwifruits.

• Journal of Korean Ophthalmic Optics Society
• /
• 제17권1호
• /
• pp.99-105
• /
• 2012

Purpose: The purpose of this study is to demonstrate inactivation effect of UVA-LED ultraviolet radiation upon Pseudomonas aeruginosa and Staphylococcus aureus which are the major bacteria causing eye diseases. Methods: The small sterilization device was made using UVA-LED of 400 nm. After Pseudomonas aeruginosa was diluted to $10^{-7}$ and Staphylococcus aureus to $10^{-5}$ and diluted solutions were put onto each liquid medium. They were irradiated by 400 nm of UVA for different amount of time; 15 min, 30 min, 60 min, 120 min, 240 min, 360 min and 480 min each. Results: The data from sterilization test was solved to regression line equation and the target log inactivation was obtained. The 3 log inactivation UV irradiation value of Pseudomonas aeruginosa was 54,847 UV dose ($mJ/cm^2$) and irradiation time was 135.42 min while the 3 log inactivation of Staphylococcus aureus was 39,066 UV dose ($mJ/cm^2$) and irradiation time was 98.72 min. Conclusions: The inactivation effect of sterilization method using 400 nm of UVA-LED upon Pseudomonas aeruginosa and Staphylococcus aureus has been verified and it is considered as a useful method in inactivating the contact lenses.

• Korean Journal of Optics and Photonics
• /
• 제28권6호
• /
• pp.295-303
• /
• 2017

In this paper, we have studied a method of forming a line beam using a UV LED. The existing linear-type UV LED curing optical system is composed of several cylindrical lenses, but problems such as optical system alignment, enlargement of the module, efficiency, etc. may arise in the future. As an alternative to these problems, a bar-type TIR lens having a freeform surface only in the y-axis direction is designed, to verify that it shows advantages in maximum illuminance, uniformity of illuminance, and flux efficiency.

• ETRI Journal
• /
• 제35권4호
• /
• pp.566-570
• /
• 2013

In this paper, we demonstrate the capabilities of 380-nm ultraviolet (UV) light-emitting diodes (LEDs) using metal organic chemical vapor deposition. The epi-structure of these LEDs consists of InGaN/AlGaN multiple quantum wells on a patterned sapphire substrate, and the devices are fabricated using a conventional LED process. The LEDs are packaged with a type of surface mount device with Al-metal. A UV LED can emit light at 383.3 nm, and its maximum output power is 118.4 mW at 350 mA.