• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.177-180
• /
• 2000

We studied the degradation of EVA for the protection of solar cell by UV-rays irradiation. We investigated the reduction of electrical efficiency, photo transmmitance and degradation of EVA by UV-rays irradiation. We utilized the UV irradiation equiped with fluorescent 313nm UV lamp and radiated for 400 hours. For the chemial analysis, we used the UV-vis spectrometer, XPS and examined the degradation mechanism by UV irradiation. It is found that the discolored phenomena, the decrease of photo transmmitance and oxidation reaction is occured by UV irradiation on the EVA sample for the protection of solar cell.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.505-512
• /
• 2021

A 3D model was developed to calculate the UV intensity of a submerged-type UV disinfection reactor. Numerical experiments were conducted by inputting the design factors of an open channel-type disinfection reactor and a pipe-type disinfection reactor that were installed in an actual sewage treatment plant. The following data were obtained: The average UV intensity of the installed open channel-type reactor and pipe-type reactor was 7.87 mW/cm² and 13.09 mW/cm², respectively; the UV dose reflecting the UV irradiation time and taking into account attenuation effects such as mixing imbalance, lamp aging, temperature, and fouling, was expected to be 21.1 mJ/cm² and 24.8 mJ/cm², respectively, and these values are 5 % and 24 % higher than the target UV dose of 20 mJ/cm², respectively. By using the UV3D model, the optimal lamp position, which maximizes the average UV intensity without changing the size of the disinfection reactor or lamp output power, can be found. In this case, by only adjusting the lamp position, the average UV intensity can be increased by 0.9 % for the open channel-type and 0.5 % for the pipe-type, respectively. A better average UV intensity can be obtained by model simulation. By adjusting the horizontal and vertical ratio of the open channel-type reactor and by moving the lamp position, the average UV intensity can be increased by 7.4 % more than the present case.

• The Journal of Natural Sciences
• /
• v.9 no.1
• /
• pp.45-52
• /
• 1997

We have examined the effects of low concentrations of MNNG, alkylating agent, in survival and mutagenesis in Aspergillus nidulans. Pretreatments of cells with nontoxic and submutagenic doses of MNNG did not reduce the cytotoxic and mutagenic effects of exposure to a high concentration of drug. The results imply that adaptive responses on survival and mutagenesis for MNNG treatments do not occur in Aspergillus nidulans. In the first mitotic cell cycle during germination, the sensitivity to MNNG has been investigated at hourly time interval, and compared with that for UV irradiation. In both UV and MNNG treatments, the sensitivity increased till S cell stage, and decreased while DNA replication continued. Different from that show for UV irradiation, lethality to MNNG reached to the maximum at G2 cell stage.

• Journal of Life Science
• /
• v.16 no.4
• /
• pp.704-709
• /
• 2006

The present study intends to characterize the DNA damage-inducible responses in Caenorhabditis elegans. To study UV-inducible responses in C. elegans, two UV-inducible cDNA clones were isolated from C. elegans by using subtration hybridization method. To investigate the expression of isolated genes, UV100 and UV150, the cellular levels of the transcript were determined by Northern blot analysis after UV-irradiation. The transcripts of isolated gene increased rapidly and reached maximum accumulation after UV-irradiation. Compared to the message levels of control, the levels of maximal increase were approximately 2 folds to UV-irradiation. These results implied that the effects of damaging agents are complex and different regulatory pathways exist for the induction of these genes. To study the function of UV100 and UV150 gene in response to UV irradiation, we carried out a RNAi experiment and investigated the UV sensivity. This result indicated that UV100 gene involved in stage-specific repair pathway or regulated by development.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.4
• /
• pp.311-316
• /
• 2008

In this study, we have investigated the effects of ultraviolet (UV) irradiation on the external and internal structure of human hair. For changes in morphological and chemical structure of UV-exposed hair, we utilized several microscopic techniques such as scanning electron microscope (SEM), transmission electron microscope (TEM), confocal laser scanning microscope (CLSM), and etc. The SEM showed the scales of UV-exposed hair appeared to be rough and bulkier because of chemical oxidation during UV irradiation. Small bulgy area of UV_exposed hair surface was appeared as a result of the decomposition in cysteic acid. In the TEM picture the UV-exposed hair showed the cleaved aperture of hair and destruction of melanin granules. Three dimensional topographical images were obtained by using CLSM. In the optical single section, high fluorescent intensity appeared in virgin hair. In the case of UV-exposed hair, low fluorescence intensity appeared. This means the aromatic amino acids in virgin hair were more abundant than UV-exposed hair.

• Journal of Life Science
• /
• v.12 no.3
• /
• pp.274-280
• /
• 2002

The metabolites related to phenylpropanoid pathway play an important role in the self-defense of plants and induced by environmental stress like wounding, pathogen attack, UV-irradiation and so on. The mRNA level of rite phenylalanine ammonia lyase (PAL) was increased at 12 h to 48 h, however it was gradually decreased 48 h to 60 h after UV irradiation. The PAL enzyme activities in rice were peaked at the time of 24 h after UV irradiation, on the other hand, it was not affected by wounding. The PAL enzyme activities in pepper were raised high at 24 h and 10 h by UV irradiation and wounding respectively. The cinnamic acid 4-hydroxylase (C4H) activities were increased by wounding treatment and were detected from 12 h to end time point of experiment, while UV-irradiation didn't affect the C4H activity in rice and pepper. These results were assumed that the action of isoflavonid has an alternative effect on the defenses which include wounding and UV irradiation and on the diverse roles in rice and hot pepper.

• Journal of Adhesion and Interface
• /
• v.14 no.4
• /
• pp.167-174
• /
• 2013

In this study, Ultraviolet (UV) curable urethane acrylates for ink binder was prepared by reaction of IPDI, polyether polyol and HEA. The UV curing behavior of compositions with HEA/PETA ratio on UV irradiation time was investigated by FT-IR spectrophotometer, probe tack tester and Photo-DSC. Conversion % and gel content were increased with increasing UV irradiation time, but probe tack was decreased. Storage modulus, tensile strength and decomposition temperature were increased as PETA content increased. In case of HEA/PETA ratio was 30/70, adhesion property of UV-cured composition on PMMA sheet was excellent.

• Korean Journal of Human Ecology
• /
• v.20 no.5
• /
• pp.1009-1023
• /
• 2011

This study was carried out to investigate the variations of catechu dyed fabrics under UV irradiation. Catechu dyed cotton and silk fabrics mordanted with Fe and Cu were irradiated with UV under dry and wet conditions, and then were evaluated on color changes and mechanical properties. Owing to UV irradiation, the K/S values of catechu dyed cotton fabrics increased until a certain amount of time but those of catechu-dyed silk fabrics increased continuously. Cu mordanting cotton fabrics showed the smallest changes due to the UV treatment, and silk fabrics mordanted with Fe showed the largest changes. Wetted fabrics were accelerated maillard browning by UV. Un-mordanted cotton fabrics treated with UV under dry conditions changed its YR color to Y, but changed its Y color to YR under wet conditions. However, mordanted cotton fabrics treated with UV didn't change their color. Dyed silk fabrics except those Fe mordanted and in wet conditions continued to keep their color after UV irradiation. Silk fabric mordanted with Fe under wet conditions changed its Y color to YR by UV irradiation. UV irradiation didn't affect the mechanical properties of catechu-dyed cotton and silk fabrics in any significant way.

• Applied Biological Chemistry
• /
• v.51 no.4
• /
• pp.276-280
• /
• 2008

To elucidate the effects of ultraviolet (UV) irradiation on molecular properties of ovalbumin, the molecular weight profile, secondary structure and tertiary structure of proteins were examined after irradiation by UV with 254 nm wavelength for 4, 8, 16 and 32 hrs, respectively. UV irradiation of protein solution caused the disruption on the native state of protein molecules. SDS-PAGE and gel permeation chromatography indicated that radiation caused initial fragmentation of polypeptide chains and as a result subsequent aggregation due to cross-linking of protein molecules. Circular dichroism (CD) study showed that UV irradiation caused the change on the secondary structure resulting in decrease of helical structure or compact denature on structure of protein depending on irradiation period. Fluorescence spectroscopy indicated that irradiation quenched the emission intensity excited at 280 nm. These results suggest that UV irradiation affect the molecular properties of ovalbumin and may have potential as a means to change the antigenicity of protein allergen.

• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.28-33
• /
• 2011

UV-C and -B types of lamps, and $H_2O_2$ as a photocatalytic material were applied to optimize processing conditions for pesticides removal in Mandarine orange peel. Factors to affect the removal of pestrcides were arranged as a function of irradiation temperature, irradiation time, and $H_2O_2$ spray concentration. The optimum processing conditions for the chloropyrifos and the EPN removals in Mandarine orange peel were irradiation time of 60 min, irradiation temperature of $45^{\circ}C$ and $H_2O_2$ spray concentration of 1000 ppm. However, the optimum processing conditions for methidathion removal were 60 min of irradiation time, $40^{\circ}C$ of irradiation temperature and 1000 ppm of $H_2O_2$ spray concentration. The residual percentages of chloropyrifos, EPN and methidathion were 46, 49 and 28% after above irradiation processing, respectively.