• 한국정보처리학회논문지
• /
• 제5권6호
• /
• pp.1441-1456
• /
• 1998

멀티미디어 연출을 순차적으로만 하는 것이 아니라 링크개념을 설정하여 특정지점에서 원하는 다음 정보를 보기 위하여 비순차적으로 연출할 수 있도록 하고 그 하위수준의 연출이 완료되면 다시 원래 프리젠테이션으로 되돌아 계속 연출하는 것이 하이퍼프리젠테이션의 개념이다. 이러한 순차적인 연출 시스템에 비순차적인 연출방법인 하이퍼 프리젠테이션 개념을 도입함에 있어서 하이퍼 프리젠테이션의 명시방법이나 연속미디어상의 하이퍼 링크를 위한 hot-spot 설정방법, 혼합된 프리젠테이션을 위한 새로운 동기화 명시방법과 하이퍼 링크 설정 방법을 제안하였다. 그리고 DCT변환방식을 이용하여 압축된 미디어에 하이퍼 링크를 실시간으로 설정하는 방법을 제안하였다. 또한 위에서 제시된 명시방법을 이용하여 나타낸 하이퍼 프리젠테이션 프로그램이 연출 가능한지 미리 검사할 수 있는 방법도 제안하였다. 마지막으로 지금까지 제안된 방법을 MuX(Multimedia Input/Output server)에 구현하여 실제 연출될 수 있는 시나리오를 대상으로 실험하였다.

• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.80-85
• /
• 2007

We report the electro-optical properties of the sensory rhodopsin II using a near-field scanning microwave microscope(NSMM). Rhodopsin was known as a photoreceptor pigment with a retinal as a chromophore via a protonated Schiff base and consists of seven ${\alpha}-helical$ transmembrane segments. The sensory rhodopsin II, expressing E. coli UT5600 with endogenous retinal biosynthesis system and purified with $Ni^{-2}-NTA$ affinity chromatography in the presence of 0.02 % DM (Dodecyl Maltoside) from Natronomonas pharaonis. We measured the absorption spectra and the transients difference of sensory rhodopsin II from Natronomonas pharaonis using a UV/VIS spectrophotometer with Nd-Yag Laser (532 nm). The absorption spectra of NpSR II showed a typical rhodopsin spectrum with a left shoulder region and the photointermediates spectra of NpSR II-ground state (${\lambda}max=498\;nm$), NpSR II-M state (${\lambda}max=390\;nm$), and NpSR II-O state (${\lambda}max=550\;nm$) during the photocycle. The observed photocycle reaction was confirmed by measuring the microwave reflection coefficient $S_{11}$ at an operating frequency of f=3.93-3.95 GHz and compared with the results of a photocycle of NpSR II.

• 비파괴검사학회지
• /
• 제24권2호
• /
• pp.151-157
• /
• 2004

초음파검사는 재료의 표면 또는 내부에 존재하는 불 연속부를 검출하기 위해, 초음파를 재료에 전달시켜 검사하는 비파괴검사법의 일종이다. 이러한 일반 초음파검사 방법 및 일반 결함평가 방법은 복잡한 형상에서 반사되는 신호로부터 결함을 구분하기가 어려워 결함의 평가 및 검사결과에 신뢰성이 떨어지고 있는 실정이다. 따라서 이러한 crack성 결함의 발생 가능성이 높으나 기존의 초음파검사 방법으로는 결함 판별에 어려움이 있는 설비에서의 검사방법 및 결함평가 방법의 제고가 필수 불가결한 실정이다. 본 연구에서는 위상배열 초음파를 사용하여 크랙 검출능력이 높고 길이 평가가 가장 정확한 방사각도를 규명하고, 주요발전설비중 하나인 터빈에 적용하였다. 기존의 초음파 검사 방식이 아닌 위상배열 초음파를 이용하여 결함의 크기를 평가할 수 있는 신 기법 및 이를 이용하여 터빈 블레이드 루트부 내에 존재하는 미세 결함에 대하여 크기평가 방법 및 결함탐지 방법에 대하여 고찰하였다.

• 한국주거학회논문집
• /
• 제24권1호
• /
• pp.21-31
• /
• 2013

This study focuses on the regional characteristics observed in the composition and floor plan of folk houses in the Young-cheon region situated in the Southern East inland of Gyungsangbukdo. According to the typical characteristics of the Korean folk house, Young-cheon region is supposed to be classified as the Young-Nam region. Our study shows that the open inverse 'ㄱ' type composition is the most common among others, which consists the living room, UtChae and one BoosokChae that serves as a living room and a farm shop. The typical floor plan is called 'Young Nam type' 'H$\hat{o}$tjib' composed of four rooms. Young Nam type of house has a wall in front of the room floor with a door to make the space with the room floor as the internal space. This can be explained by the climatic conditions in the Southern region of Gyungsangbukdo, which has a very cold winter and has a harsh spring wind in Young-cheon. The structural feature to which we should pay attention is the Young Nam type house has a gambrel roof. The evolutions of the house in the 70s are observed in the roof during the Saemaeul Movement from a hut to a modernized roof. In the 80s, the replacement of the heating system, expansion of rooms, modernization of kitchen, replacement of paper windows, modernization of roof, and construction of amenities had taken place to change the space, construction and structure following the modern house features.

• Corrosion Science and Technology
• /
• 제15권4호
• /
• pp.182-188
• /
• 2016

Significant piping wall thinning caused by Flow-Accelerated Corrosion (FAC) and Erosion-Corrosion (EC) continues to occur, even after the Mihama Power Station unit 3 secondary pipe rupture in 2004, in which workers were seriously injured or died. Nuclear power plants in many countries have experienced FAC and EC-related cases in steam cycle piping systems. Korea has also experienced piping wall thinning cases including thinning in the downstream straight pipe of a check valve in a feedwater pump line, the downstream elbow of a control valve in a feedwater flow control line, and failure of the straight pipe downstream of an orifice in an auxiliary steam return line. Cause analyses were performed by reviewing thickness data using Ultrasonic Techniques (UT) and, Scanning Electron Microscope (SEM) images for the failed pipe, and numerical simulation results for FAC and EC cases in Korea Nuclear Power Plants. It was concluded that the main cause of wall thinning for the downstream pipe of a check valve is FAC caused by water vortex flow due to the internal flow shape of a check valve, the main cause of wall thinning for the downstream elbow of a control valve is FAC caused by a thickness difference with the upstream pipe, and the main cause of wall thinning for the downstream pipe of an orifice is FAC and EC caused by liquid droplets and vortex flow. In order to investigate more cases, additional analyses were performed with the review of a lot of thickness data for inspected pipes. The results showed that pipe wall thinning was also affected by the operating condition of upstream equipment. Management of FAC and EC based on these cases will focus on the downstream piping of abnormal or unusual operated equipment.

• Clinics in Shoulder and Elbow
• /
• 제27권1호
• /
• pp.3-10
• /
• 2024

Background: Gunshot-related fractures near the elbow are challenging, and available data to guide the practitioner are lacking. This report analyzes injury patterns and treatment strategies in a case series from a high-volume urban trauma center. Methods: All periarticular gunshot fractures near the elbow treated at a level 1 trauma center from 2014 to 2018 were retrospectively reviewed. Fracture location, patient demographics, concomitant injuries, treatment modalities, and complications were analyzed. Results: Twenty-four patients were identified. All patients received prophylactic antibiotics upon admission and underwent urgent surgical debridement. Open reduction and internal fixation (ORIF) was performed with initial debridement in 22 of 24 patients. Seven patients sustained distal humerus fractures, 10 patients sustained isolated proximal ulna or proximal radius fractures, and seven had combined fracture patterns. Eleven patients presented with nerve palsy, and two had transected nerves. Two patients had vascular injury requiring repair. One patient required a temporary elbow-spanning external fixator and underwent staged debridement followed by ORIF. One patient with a grade IIIC fracture developed a deep infection that precluded ORIF. One patient required revision ORIF due to fracture displacement. Conclusions: This investigation reports on management of ballistic fractures near the elbow at a busy urban level I trauma center. Our management centered on rapid debridement, early definitive fixation, and intravenous antibiotic administration. We report on associated neurovascular injury, bone loss, and other challenges in this patient population. Level of evidence: IV.

• 천문학회보
• /
• 제40권1호
• /
• pp.61.2-61.2
• /
• 2015

15P/Finlay is one of the Jupiter-Family Comets that has long been known since the late 19 century. The comet maintains the perihelion around 1.0 AU over a century, without showing any prominent activities (i.e. fragmentation or eruption) since the discovery. According to reports in unpublished observations, the comet exhibited an outburst in the middle of 2014 December. We conducted a imaging observation of 15P/Finlay just after the report, from 2014 December 23 to 2015 February 18 using three telescopes (the Okayama Astrophysical Observatory 50-cm telescope, the Ishigakijima Astronomical Observatory 105-cm telescope, and the Nishi-Harima Astronomical Observatory 2-m telescope), which constitute a portion of the OISTER (an inter-university observation network in the optical and infrared wavelengths). As a result of the frequent observations, we witnesses the second outburst around UT 2015 January 16. Such cometary outbursts draw the attention to researchers on ground that they could offer insight into the internal structure of comets, following a historical outburst occurred at 17P/Holmes on 2007 October 23. Although cometary outbursts have been often reported mostly in unpublished observations or unreviewed reports, it should be emphasized that there are not a sufficient number of astrophysical research which characterizes the physical properties by observing the aftermaths. This presentation provides a new observational result of 15P/Finlay outburst. Based on the morphological development of the dust cloud as well as the near-nuclear magnitude, we will derive the kinetic energy of the outburst. Finally we plan to compare the results of 15P/Finlay with those of analogical events at 17P/Holmes and P/2010 V1 (Ikeya-Murakami).

• 천문학회보
• /
• 제36권2호
• /
• pp.153.2-153.2
• /
• 2011

The IGRINS (Immersion GRating INfrared Spectrometer) is a high resolution wide-band infrared spectrograph developed by Korea Astronomy and Space Science Institute (KASI) and the University of Texas at Austin (UT). Immersion grating is a key component of IGRINS, which disperses the input ray by using a Silicon material with a lithography technology. Opto-mechanical mount for the immersion grating is important to keep the high spectral resolution and the optical alignment in a cold temperature of $130{\pm}0.06K$. The optical performance of immersion grating can maintain within the de-center tolerance of ${\pm}0.05mm$ and the tip-tilt tolerance of ${\pm}1.5arcmin$. The mount mechanism utilizes the flexure and the kinematic support design to satisfy the requirement and the operation condition. When the IGRINS system is cooled down to a cold temperature, three flexures compensate the thermal contraction stress due to the different material between the immersion grating and the mounting part(Aluminum 6061). They also support the immersion grating by an appropriate preload. Thermal stability is controlled by a copper strap with proper dimensions and a heater. Generally structural and thermal analysis was performed to confirm the mount mechanism. This talk presents the opto-mechanical mount design of the immersion grating of IGRINS.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.3003-3011
• /
• 2021

A FAC (flow-accelerated corrosion) test was performed for a straight pipe composed of the SA335 Gr P22 and SA106 Gr B (SA106-SA335-SA106) types of steel with welds as a function of the flow rate in the range of 7-12 m/s at 150 ℃ and with DO < 5 ppb at pH levels ranging from 7 to 9.5 up to a cumulative test time of 7200 h using the FAC demonstration test facility. Afterward, the experimental pipe was examined destructively to investigate opposite effects as well as entrance effects. In addition, the FAC rate obtained using a pipe specimen with a 50 mm inner diameter was compared with the rate obtained from a rotating cylindrical electrode. The effects of the complicated fluid flows at the elbow and orifice of the pipeline were also evaluated using another test section designed to examine the independent effects of the orifice and the elbow depending on the distance and the combined effects on orifice and elbow. The tests were performed under the following conditions: 130-150 ℃, DO < 5 ppb, pH 7 and a flow rate of 3 m/s. The FAC rate was determined using the thickness change obtained from commercial room-temperature ultrasonic testing (UT).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.751-770
• /
• 2019

Action recognition is an essential task in computer vision due to the variety of prospective applications, such as security surveillance, machine learning, and human-computer interaction. The availability of more video data than ever before and the lofty performance of deep convolutional neural networks also make it essential for action recognition in video. Unfortunately, limited crafted video features and the scarcity of benchmark datasets make it challenging to address the multi-person action recognition task in video data. In this work, we propose a deep convolutional neural network-based Effective Hybrid Learning (EHL) framework for two-person interaction classification in video data. Our approach exploits a pre-trained network model (the VGG16 from the University of Oxford Visual Geometry Group) and extends the Faster R-CNN (region-based convolutional neural network a state-of-the-art detector for image classification). We broaden a semi-supervised learning method combined with an active learning method to improve overall performance. Numerous types of two-person interactions exist in the real world, which makes this a challenging task. In our experiment, we consider a limited number of actions, such as hugging, fighting, linking arms, talking, and kidnapping in two environment such simple and complex. We show that our trained model with an active semi-supervised learning architecture gradually improves the performance. In a simple environment using an Intelligent Technology Laboratory (ITLab) dataset from Inha University, performance increased to 95.6% accuracy, and in a complex environment, performance reached 81% accuracy. Our method reduces data-labeling time, compared to supervised learning methods, for the ITLab dataset. We also conduct extensive experiment on Human Action Recognition benchmarks such as UT-Interaction dataset, HMDB51 dataset and obtain better performance than state-of-the-art approaches.