• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.1
• /
• pp.11-18
• /
• 2015

This paper proposes a high-efficiency 3-kW hybrid ESS with emergency power supply. The proposed system enables efficient use of power from photovoltaic (PV) cells and energy storage system (ESS). The proposed system can operate as an uninterruptible power supply (UPS) when grid fault occurs, providing seamless transfer from grid-connected mode to stand-alone mode. The LLC converter for PV achieves ZVS turn-on of switches and ZCS turn-off of diodes, and the isolated bidirectional DC-DC converter for ESS achieves ZCS turn-off regardless of load condition, resulting in high efficiency. The efficiency and performance of the proposed hybrid ESS has been verified by a 3-kW prototype.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.4
• /
• pp.1067-1074
• /
• 2016

A start-up demonstration test is a mechanism that is usually used to determine the reliability of equipment, for example water pumps, car batteries and power generators. The simplest and oldest start-up demonstration tests are called CS (consecutive successes) which have been studied by Hahn and Gage (1983), Viveros and Balakrishnan (1993).At first Hahn and Gage (1983) discussed the start-up demonstration test. I was based on i.i.d (independently and identically distributed) binary outcomes with the specified number of consecutive successful start-ups. Oh (2016) studied CSNCF (consecutive successful, but not consecutive failures). In this paper, we investigated the CS and CSNCF models, also their applications to start-up demonstration tests. The numerical results showed that the expectations and variances of the total number of attempted start-ups until the acceptance of the unit are gradually increasing in all of the specified number of successes as the p (probability of a successful start-up in an single trial) decreases from 0.99 to 0.90. The difference between means of the CS mode and CSNCF model is small, but variances of the CS and CSNCF are big.

• Korean Journal of Metals and Materials
• /
• v.50 no.7
• /
• pp.545-548
• /
• 2012

The optical and electronic properties of Indium Tin Oxide (ITO) thin films deposited on a RF-plasma treated glass substrate were investigated by X-Ray Photoelectron Spectroscopy (XPS), Ultra-violet Photoelectron Spectroscopy (UPS), Reflected Electron Energy Loss Spectroscopy (REELS). The modification of glass substrates was carried out by varying the time of the plasma surface treatment in an oxygen atmosphere. The focus of this research was to examine how the optical and electronic properties of ITO thin films change with the plasma treatment time. The surface energy increased since the carbon bonds were removed from the surface after the glass substrate received the surface treatment. The ITO thin films produced on the glass substrate with surface treatment showed that the high optical transmittance was approximately 85%. The measured band gap energy was as high as 3.23 eV when the plasma treatment time was 60 s and the work function after the treatment was increased by 0.5 eV in comparison to that before the treatment of 60 s. The ITO thin film exhibited an excellent sheet resistance of $2.79{\Omega}/{\Box}$. We found that the optical and electronic properties of ITO thin films can be improved by RF-plasma surface treatment.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.215-215
• /
• 2012

본 연구에서는 화학적 도핑 방법 및 플라즈마 표면 처리방법을 이용하여 그래핀 내 Electron & Hole carrier 들의 농도를 변화시켜, 전계효과에 따른 Graphene Field Effect Transistors (GFETs) 소자의 전기적 특성 변화를 확인 하였으며, 전기적 특성 결과 중에 Dirac-point (DP) 이동에 따른 그래핀 $E_F$ (Fermi-energy) level 변화를 계산 및 유추 하였으며, Ultraviolet Photoelectron Spectroscpy (UPS)를 이용하여 실제적으로 He 소스 광전자를 그래핀 샘플 표면에 입사하여 나오는 전자들의 Kinetic Energy($E_K$) 결과를 이용하여 Work function (WF) 변화를 확인 및 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.515-518
• /
• 2004

Increasing of the nonlinear power electronics equipments, power conditioning systems have been researched and developed for many years to compensate the harmonic disturbances and the reactive power. The main function of power conditioning systems is to reduce harmonic distortions, since extensive surveys quantify the problems associated with electric networks having non-linear loads. The main function of power conditioner compensates the current instead of the voltage. Therefore the inverter used in power conditioner is mostly the current controlled type. In this paper, we propose the power conditioner using photovoltaic system, which is operated by the PRT(Polarized Ramp Time) current control algorithm. The proposed system could also achieve Demand Side Management's function and Uninterruptible Power Supply's function simultaneously. To verify the proposed current controlled inverter for improved quality of the grid, the detail simulation and experiment results indicate that operation PCS, DSM and UPS can be achieved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.166.1-166.1
• /
• 2014

We have controlled the graphene surface in two ways to improve the device performance of optoelectronics based on graphene transparent conductive films. We controlled multilayer graphene (MLG) work function and localized surface plasmon resonance wavelength using a silver nanoparticles formed on graphene surface. Graphene substrates were prepared using a chemical vapor deposition and transfer process. Various size of silver nanoparticles were prepared using a thermal evaporator and post annealing process on graphene surface. Silver nanoparticles were confirmed by using scanning electron microscopy (SEM). Work functions of graphene surface with various sizes of Ag nanoparticles were measured using ultraviolet photoelectron spectroscopy (UPS). The result shows that the work functions of MLG could be controlled from 4.39 eV to 4.55 eV by coating different amounts of silver nanoparticles while minimal changes in the sheet resistance and transmittance. Also the Localized surface plasmon resonance (LSPR) wavelength was investigated according to various sizes of silver nanoparticles. LSPR wavelength was measured using the absorbance spectrum, and we confirmed that the resonance wavelength could be controlled from 396nm to 425nm according to the size of silver nanoparticles on graphene surface. To confirm improvement of the device performance, we fabricated the organic solar cell based on MLG electrode. The results show that the work function and plasmon resonance wavelength could be controlled to improve the performance of optoelectronics device.

• Journal of Distribution Research
• /
• v.11 no.1
• /
• pp.41-68
• /
• 2006

Today, Manufacturing companies execute the logistics outsourcing that commits the non-core logistic function to the specialized logistics corporation, which makes the manufacturing company focus on its core competence, product development and marketing, reduces logistics cost and improves customer service level. Recently, Logistics outsourcing is developed into cooperative sourcing based on the partnership. Case study on the logistics outsourcing will provide the good guideline for planning of the outsourcing strategy. The objective of this research is making a sense about 4PL through the case of UPS-Samsung Electro-Mechanics and catching major issue to provide the guideline for the cooperation outsourcing strategy. We investigated historical backgrounds of the logistics outsourcing between UPS and Samsung Electro-Mechanics. We also investigated problems occurred in outsourcing process at the five dimensions-organizational problem, CEO's short-term views, cultural gap between two companies, integration of IT system, and different understanding about outcomes. We expect to give many implications to manufacturing companies which want to cooperate with specialized logistics corporation.

• Tuberculosis and Respiratory Diseases
• /
• v.83 no.4
• /
• pp.312-320
• /
• 2020

Background: Systemic sclerosis (SSc) involves multiple organ systems and has the highest mortality among connective tissue diseases. Interstitial lung disease is the most common cause of death among SSc patients and requires closer studies and follow-ups. This study aimed to identify lung function changes and predictors of progressive disease in systemic sclerosis-related interstitial lung disease (SSc-ILD). Methods: A retrospective study extracted SSc patients from an electronic database January 2002-July 2019. Eligible cases were SSc patients >age 15 diagnosed with SSc-ILD. Factors associated with progressive disease were analyzed by univariate and multivariate logistic regression analyses. Results: Seventy-eight SSc-ILD cases were enrolled. Sixty-five patients (83.3%) were female, with mean age of 44.7±14.4, and 50 (64.1%) were diffuse type SSc-ILD. Most SSc-ILD patients had crackles (75.6%) and dyspnea on exertion (71.8%), and 19.2% of the SSc-ILD patients had no abnormal respiratory symptoms but had abnormal chest radiographic findings. The most common diagnosis of SSc-ILD patients was non-specific interstitial pneumonia (43.6%). The lung function values of diffusing capacity of the lung for carbon monoxide (DLCO) and DLCO per unit alveolar volume declined in progressive SSc-ILD during a 12-month follow-up. Male and no previous aspirin treatment were the two significant predictive factors of progressive SSc-ILD with adjusted odds ratios of 5.72 and 4.99, respectively. Conclusion: This present study showed that short-term lung function had declined during the 12-month follow-up in progressive SSc-ILD. The predictive factors in progressive SSc-ILD were male sex and no previous aspirin treatment. Close follow-up of the pulmonary function tests is necessary for early detection of progressive disease.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.301-301
• /
• 2010

In order to enhance the efficiency of the organic solar cells, the effects of plasma surface treatment with using $CF_4$ and $O_2$ gas on the anode ITO were studied. The polymer solar cell devices were fabricated on ITO glasses an active layer of P3HT (poly-3-hexylthiophene) and PCBM ([6,6]-phenyl C61-butyric acid methyl ester) mixture, without anode buffer layer, such as PEDOT:PSS layer. The metallic electrode was formed by thermally evaporated Al. Before the coating of organic layers, ITO surface was exposed to plasma made of $CF_4$ and $O_2$ gas, with/without heat treatment. In order to identify the effect the surface treatment, the current density and voltage characteristics were measured by solar simulator and the chemical composition of plasma treated ITO surface was analyzed by using X-ray photoelectron spectroscopy(XPS). In addition, the work function of the plasma treated ITO surface was measured by using ultraviolet photoelectron spectroscopy(UPS). The effects of plasma surface treatment can be attributed to the removal organic contaminants of the ITO surface, to the improvement of contact between ITO and buffer layer, and to the increase of work function of the ITO.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.3
• /
• pp.232-237
• /
• 2017

Dentists often place post and core buildups on endodontically treated abutments for crown and bridge restorations. This article analyzes the bio-mechanical purposes, advantages and disadvantages of placing a core or a post and core in an endodontically treated tooth and reviews literature on post and core biomechanics. The author assesses the scientific rationale of the claim that the main purpose of a post is to retain a core, or the claim that posts weaken teeth. More likely, the main function of a post is to help prevent the abutment, on which a crown is cemented, from fracturing such that the abutment separates from the tooth root, at a fracture plane that is located approximately and theoretically at the level of the crown (or ferrule) margin. A post essentially improves the ferrule effect that is provided by the partial fixed denture prosthesis. This paper also explores the difference between bio-mechanical failures of crowns caused by lack of retention or excess taper, versus failures due to a sub-optimal ferrule effect in crown and bridge prostheses.