• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2082-2084
• /
• 1997

This paper proposes a new control strategy of bidirectional uninterruptible power supply(UPS) with the performance of active power filter which compensate the harmonics and reactive power. To improve the transient response for the effective compensation in active power filter mode, it is considered that a simple and precise calculation method of the compensation reference current for the harmonics and reactive power compensation. So a novel closed-loop control strategy is used to calculate the reference current. And the current regulated instantaneous voltage control scheme is used in back-up power mode. The system model and control algorithm are described and analyzed, and the system Performance is verified by the simulation and experimental results.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.8
• /
• pp.405-412
• /
• 2003

This paper presents a three-phase Line-Interactive uninterruptible power supply (UPS) system with series-parallel active power-line conditioning capabilities, using synchronous reference frame (SRF) based controller, which allows an effective power factor correction, source harmonic voltage compensation, load harmonic current suppression, and output voltage regulation. The three-phase UPS system consists of two active power compensator topologies. One is a series active compensator, which works as a voltage source in phase with the source voltage to have the sinusoidal source current and high power factor under the deviation and distortion of the source voltage. The other is a parallel active compensator which works as a conventional sinusoidal voltage source in phase with the source voltage, providing to the load a regulated and sinusoidal voltage with low THD (total harmonic distortion). The control algorithm using SRF method and the active power flow through the Line-interactive UPS systems are described and studied. The simulation and experimental results are depicted in this paper to show the effect of the proposed algorithm.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.467-469
• /
• 2006

최신의 디지털 방식 UPS(Uninterruptible Power Supply)는 10여 년 전의 아날로그 UPS에 비해 많은 설계 요인들로 인해 복잡해지고 있다. 고속-고성능의 DSP(Digital Signal Process), 다수의 I/O를 위한 FPGA(Field-Programmable Gate Array), 다기능의 사용자 인터페이스 그리고 다양한 통신 등이 그 예라고 할 수 있다. 임베디드 디자인이 이렇게 복잡해지면서 하드웨어나 소프트웨어를 신뢰성 있게 테스트하기에 기존 방법으로는 충분치 않게 되었다. 본문에서는 NI(National Instruments)의 버추얼 인스트루먼트(Virtual Instrument) 기술을 이용하여 자동화된 테스트 시스템에 대해 기술한다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.6
• /
• pp.322-329
• /
• 1999

In this paper a practical series-parallel compensated UPS is suggested, which has high input power factor and sinusoidal output voltage regulation capability. Compared to conventional cascaded UPS, the size can be reduced significantly with high quality input and output waveforms. The front converter and the main inverter can be considered decoupled, hence the front converter and the main inverter can be designed independent of each other. In this paper, analysis and experimental results for an l KVA prototype are presented.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.378-379
• /
• 2018

본 연구는 속응형 단상 UPS(Uninterruptible Power Supply)를 위한 이상전원 검출 알고리즘에 관한 연구이다. 한국전력공사 등의 특수한 UPS 응용분야에서는 전원의 1/4주기 이내에 전원의 이상을 검출하고 UPS가 정상 기동할 필요가 있다. 본 연구에서는 가상DQ기반의 고성능 PLL(Phase Locked Loop)을 응용하여 별도의 전원검출 알고리즘 없이도 임의의 위상각에서 1/4주기이내에 전원의 크기 및 위상에 관한 오류를 검출할 수 있음을 보인다. 제시된 방법은 시뮬레이션 및 실험을 통해 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1049-1051
• /
• 2001

This paper proposes a new control strategy of multifunctional uninterruptible power supply(UPS) with the performance of active power filter which compensate the harmonics and reactive power. To improve the transient response for the effective compensation in active power filter mode, it is considered that a simple and precise calculation method of the compensation reference current for the harmonics and reactive power compensation. So a novel closed-loop control strategy is used to calculate the reference current. And the current regulated instantaneous voltage control scheme is used in back-up power mode. The system model and control algorithm are described and analyzed, and the system performance is verified by the simulation results.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.75-80
• /
• 1998

This paper presents an observer filter algorithm to estimated the load currents in the output voltage control of 3-phase uninterruptible power supply with deadbeat controller. As the result of the proposed algorithm, the sensors to measure the load currents is not required. The comparison of output voltage controls according to the methods of measuring the load currents is also presented in this paper. The results of comparison are shown by the simulation.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.566-569
• /
• 2004

The recent growth in the use of impactive and nonlinear loads, electronic devices sensitive to power quality has caused many power quality problems. Recently, in power system, not only the reliability of the power supply but also the DVR(Dynamic Voltage Restorer) are being studied more and more. The DVR is a series compensator which can instantaneously compensate a voltage variation in supply side, and is a more effective than a existing UPS(Uninterruptible Power Supply) which can be only used in limited range of loads such as single load. Hence, in this paper, a study of inverter side L-C filter output Voltage for DVR is discussed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.102-107
• /
• 2005

This paper describes a new voltage sag-swell generator for the test of custom power devices such as UPS, DVR, DSTATCOM, SSTS, etc. Voltage sag, swell, outage, and unbalance generation mechanism and the operating principle are described for the proposed scheme. The usefulness of the scheme is proved through simulations and experiments. The proposed scheme has good features of simple structure, high reliability, wide range of sag and swell variation, and easy control. Especially, the scheme can provide a cost-effective implementation of a power quality disturbance generator. Therefore, it is expected that the scheme will contribute to the self implementation of the system with low cost in laboratory.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.546-551
• /
• 2008

In this paper, a flux-lock type superconducting fault current limiter(SFCL) integrated with a voltage-controlled voltage source inverter(VC-VSI) is proposed. The suggested equipment, which consists of a flux-lock type SFCL and a VCVSI, can perform the fault current limiting operation from the occurrence of a short-circuit. In addition, it can compensate the reactive power that the non-linear load requires and also perform the uninterruptible power supply(UPS) as well as the load voltage stabilization by controlling the amplitude and the phase of the inverter's output voltage. The specification for a test model was determined and its various functions such as the fault current limiting and the power conditioning operations were presented and analyzed via computer simulation. Through the analytical results based on the computer simulation, the validity of the analysis was confirmed and its multi-operation was discussed.