• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.218-222
• /
• 2009

A level-set (LS) method is presented for computation of boiling phenomena which involve liquid-vapor interfaces that evolve, merge and break up in time, the flow and temperature fields influenced by the interfacial motion, and the microlayer that forms between the solid and the vapor phase near the wall. The LS formulation for tracking the phase interfaces is modified to include the effects of phase change on the liquid-vapor interface and contact angle on the liquid-vapor-solid interline. The LS method can calculate an interface curvature accurately by using a smooth distance function. Also, it is straightforward to implement for two-phase flows in complex geometries. The numerical method is applied for analysis of nucleate boiling on a horizontal surface and film boiling on a horizontal cylinder.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.921-924
• /
• 2005

Diesel generator sets with resilient mounts often experience resonances by major excitations which come from diesel engine and their foundation with rigid body modes. Because their natural frequency is determined by moment of inertia and stiffness of resilient mount vibration problems are resolved by changing location and stiffness of resilient mounts. But the calculated natural frequencies are inaccurate due to uncertainty of the inertia and mount stiffness. So this result can be useless on the design stage. In this paper, the stiffness of mount is evaluated on result from mount stiffness test in laboratory and generator set vibration test and a simple calculation method for moment of inertia is proposed. Based on these data, the procedure to select optimized mount stiffness and location on the design stage is set up.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1382-1383
• /
• 2011

결정질 실리콘 태양전지에서 전극 형성 공정은 Voc(Open-circuit voltage), Isc(Short-circuit current), Rser(Series resistance), Rshunt(Shunt resistance), FF(Fill factor) 특성에 영향을 주기 때문에 매우 중요하다. 하지만 paste와 선 공정에서의 조건에 따라 특성이 바뀌기 때문에 소성 공정을 최적화하기는 쉽지 않다. 본 연구에서는 Gravure Off-set printing 방식을 이용하여 결정질 실리콘 기판 표면에 미세 전극 형성 공정을 하고 소성 조건 최적화를 위해 peak 온도와 ramp-up 속도를 변화시켜 각 조건별 특성을 비교하였다. Peak 온도가 커질수록, contact resistance의 감소에 따라 Rser가 줄어들었다. 본 연구를 통해 Voc는 619mV, FF는 77.9%로 측정되는 Gravure Off-set 태양전지에 최적화된 소성 공정 조건을 확보하였다.

• Journal of applied mathematics & informatics
• /
• 제28권1_2호
• /
• pp.1-11
• /
• 2010

The conditional covering problem is an important variation of well studied set covering problem. In the set covering problem, the problem is to find a minimum cardinality vertex set which will cover all the given demand points. The conditional covering problem asks to find a minimum cardinality vertex set that will cover not only the given demand points but also one another. This problem is NP-complete for general graphs. In this paper, we present an efficient algorithm to solve the conditional covering problem on interval graphs with n vertices which runs in O(n)time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.653-654
• /
• 2008

This paper presents a topological shape optimization for electromagnetic system using a level set method. The optimization is progressed by updating the implicit level set function from the Hamilton-Jacobi equation. The up-wind scheme is used for numerical implementation of the Hamilton-Jacobi equation. In order to validate the proposed optimization, the core part of a C-core actuator is optimized by three cases using different materials; (single steel), (two steels), and (steel and magnet).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.23-25
• /
• 2008

This paper presents a topological shape optimization for electromagnetic system using a Level Set method. The optimization is progressed by updating the implicit Level Set function from the Hamilton-Jacobi equation. The up-wind scheme is used for numerical implementation of the Hamilton-Jacobi equation. In order to validate the proposed optimization, the core part of a C-core actuator is optimized by three cases using different materials; (single steel), (two steels), and (steel and magnet).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1868-1873
• /
• 2011

In this paper, a theoretical formulation of a simplified wheel-set model for collision-induced derailments was evaluated by numerical simulations for the wheel-climb derailment and wheel-lift derailment types. The derailment types were classified into the wheel-climb derailment and the wheel-lift derailment according to the friction force direction of the wheel-flange. The wheel-climb derailment type was classified into Climb-up, Climb/Roll-over, and Roll-over-C, and wheel-lift derailment type was classified into Slip-up, Slip/Roll-over and Roll-over-L. To verify the theoretical equations derived for the wheel-climb derailment and the wheel-lift derailment, dynamic simulations using RecurDyn of Functionbay and Ls-Dyna of LSTC were performed and compared for some examples. The derailment predictions of the suggested theoretical formulation were in good agreement with those of the numerical simulations. The direction of the frictional force between the wheel-flange and the rail can be well predicted using the suggested derailment formulation at a initial derailment.

• 대한치과의사협회지
• /
• 제52권1호
• /
• pp.17-26
• /
• 2014

Computerized 3D virtual dental models are currently available, and their use has started to improve treatment outcomes. The accuracy of digital models has been demonstrated by many studies and various intra-oral scanners are innovated for short scanning time and high precision. Recently, a digital model was combined with a high technology computer-driven system, which was developed for the application of a digital set-up and indirect bonding of lingual attachments. In this section, virtual treatment planning using a virtual set-up program is be introduced, and the clinical applications and accuracy of computer-generated indirect bonding are discussed.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.90-101
• /
• 1998

This paper presents a scheduling method that uses Petri net modeling and heuristic search to handle the tool setup. In manufacturing systems, a tool is attached to a particular machine to process a particular operation. The activity to attach a tool to a particular machine and detach the tool from the machine requires time. The processing time of operations varies according to the attached tool and the machine used. The method proposed in this paper uses Petri net to model these characteristics and applies a search algorithm to the reachability graph of the Petri net model to generate an optimal or near-optimal schedule. New heuristic functions are developed for efficient search. The experimental results that show the effectiveness of the proposed method are presented.

• 영어어문교육
• /
• 제13권3호
• /
• pp.177-201
• /
• 2007

The purpose of this study is to create step by step guidelines for effective team teaching between Korean teachers of English and native English teachers in Korea. Although team teaching has been used from 1995 in the teaching of English in Korea, the effectiveness of team teaching has not been as high as we have hoped. An important reason for this failure is the lack of communication between the Korean teachers of English and the native English teachers. More specifically, the failure has resulted from not only a lack of opportunities for these teachers to communicate but also a lack of guidelines and strategies for improved intercultural communication between teachers from different cultural backgrounds. This study provides step by step guidelines for how to set up communication time, what to share, and how to set up effective team teaching in English education.