• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.202-203
• /
• 2000

단원자를 이용한 Cavity-QED실험을 위해서는 고분해능 분광학이 필수적 요소이며, 이에 따라, 좁은선폭의 레이저가 필요하게 된다. 본 실험에서는 기준공진기를 이용한 전류되먹임방법의 1단계와, AOM(Acousto Optic Modulator)을 이용한 주파수 보정의 2단계를 거쳐 다이오드 레이저의 주파수를 안정화하였다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.347-352
• /
• 2000

We have stabIhzed the laser frequency of a commercial dIode laser using a ULE (Ultra-low expansion material) reference cavIty and the cunent modulation charactenstics of the dIode itself The liuewIdth of the frce running laser was about a 1 MHz (rms) for a sampling time of 1 s and the drift rate was 300 kHz/s. Vvhen the laser is locked to oue sIde of the transmission signal from the ULE reference cavity, the lincwidth was reduced to 46 kHz (nus) for a sampling time longer than 10 ms. The root Allan variance was less than 2 kHz for a sampling time langeI than10 ms. 10 ms.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.2
• /
• pp.171-178
• /
• 2009

The purpose of this study was the development of a digital water color measurement system using a CCD optical device. Photographs of the standard medium of Forel and Ule water color scales in the laboratory, and one of sea surface above a Secchi disc (Z=SD/2) immersed in seawater were taken. The colors of these pictures were estimated with the value of CIE $L^*a^*b^*$. Water color assessment was conducted with a digital photo-image. In the case of the Forel scale (No. 1-11), the $b^*$ value was so high that the water color number was large. In the Ule scale (No.11-21), the $a^*$ value became high, which is why the number on the water color scale was large. The color of these pictures showed that the $a^*$ value in the Forel scale and the $b^*$ value in the Ule scale increase with the increase of the F value. The $a^*$ value of seawater color was always lower than the one on the Forel and Ule water color scales. This indicates that the color of the scales differs from actual seawater color. It was concluded that water color number can more effectively be assessed by estimating the ${\Delta}Eab^*$ color difference between the water scales and actual seawater color.

• 한국전기화학회:학술대회논문집
• /
• 1998.10a
• /
• pp.67-67
• /
• 1998

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.959-974
• /
• 2021

Forel-Ule Index (FUI) is an index which classifies the colors of inland and seawater exist in nature into 21 gradesranging from indigo blue to cola brown. FUI has been analyzed in connection with the eutrophication, water quality, and light characteristics of water systems in many studies, and the possibility as a new water quality index which simultaneously contains optical information of water quality parameters has been suggested. In thisstudy, Ocean Colour-Climate Change Initiative (OC-CCI) based 4 km FUI was spatially downscaled to the resolution of 500 m using the Geostationary Ocean Color Imager (GOCI) data and Random Forest (RF) machine learning. Then, the RF-derived FUI was examined in terms of its correlation with various water quality parameters measured in coastal areas and its spatial distribution and seasonal characteristics. The results showed that the RF-derived FUI resulted in higher accuracy (Coefficient of Determination (R²)=0.81, Root Mean Square Error (RMSE)=0.7784) than GOCI-derived FUI estimated by Pitarch's OC-CCI FUI algorithm (R²=0.72, RMSE=0.9708). RF-derived FUI showed a high correlation with five water quality parameters including Total Nitrogen, Total Phosphorus, Chlorophyll-a, Total Suspended Solids, Transparency with the correlation coefficients of 0.87, 0.88, 0.97, 0.65, and -0.98, respectively. The temporal pattern of the RF-derived FUI well reflected the physical relationship with various water quality parameters with a strong seasonality. The research findingssuggested the potential of the high resolution FUI in coastal water quality management in the Korean Peninsula.

• Information and Communications Magazine
• /
• v.11 no.8
• /
• pp.60-77
• /
• 1994

This paper presents a survey of video coding schemes which use wavelet transform for the videophone on very low bit rate commun ication chan nel( ego 10 Kbps Public Service Telephone Network). Firstly, we introduce the standardization efforts to make the low bit rate videophone architecture and the typical application of low bit rate video coding scheme. Secondly, we summarize the several requirements on videophone, delay, encoder/decoder complexity, low bitrate, and progressive transmission capability. Third, we review the basic theory of wavelet transform without much mathematics. We compare the wavelet transform with short-time fourier transform and subband filters. Fourth, we summarize the video coding schemes proposed so far, and evaluate them with Ule requirements. Lastly, we conclude with fu¬ture research directions.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.784-786
• /
• 2004

Overlap errors and side-lobes can be simultaneously solved by the rule-based correction using scattering bars with the rules extracted from test patterns. Process parameters affecting the attPSM lithography simulation have been determined by the fitting method to the process data. Overlap errors have been solved applying the correction rules to the metal patterns overlapped with contact/via. Moreover, the optimal insertion rule of the scattering bars has made it possible to suppress the side-lobes and to get additional pattern fidelity at the same time.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.7 no.1
• /
• pp.32-41
• /
• 1987

As a new device of stress monitoring method, ultrasonic backscattering method has been used to aluminium samples with various grain sizes at rayleigh critical angle in order to observe the relationships between applied stress and ultrasonic backscattered energy. It was found that the ultrasonic backscattered energy was observed to decrease as the grain size increased at the given applied stress. At the same grain size, the ule ultrasonic backscattered energy increased with increasing the applies stress. Through this study, we provided some possibility to evaluate stresses in materials under loads nondestructively, and this method is expected to be used as a new stress monitoring device.

• Bulletin of the Korean Space Science Society
• /
• 2005.10a
• /
• pp.149-152
• /
• 2005

High-resolution telescope from space comprises electro-optical imagery with a ground resolution tying within the range of 1 to 5 meters. According to information documented in the literature up to now, most primary mirrors verified and flown in optical space missions have been lightweighted made from Zerodur, ULE, beryllium, SiC or aluminium. A trade off study was performed to determine as a &lightweighted& by factors like backside cell pattern, rib thickness, face thickness, mirror fixation device location and material and so on based on structural performance for primary mirror in submeter class spaceborne telescope.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.125-135
• /
• 1998

This paper aims to propose a design for simulation systems for container terminal operation evaluation. The systems cover both terminal design simulation for medium and long tern decision making and terminal operations simulation for day to day decision making. And both systems include the container terminal operation components, quay, yard and gate operations. For the flexible and efficient application of the systems, we designed the systems with three modules such as "Define Module"."Simulation Module" and "Animation Module". "Animation Module".ule&".ot;.