• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.69-73
• /
• 2013

The purpose of this paper is to analyze the carbonization pattern and operation characteristics of an MCCB. The MCCB is consisted of the actuator lever, actuator mechanism, bimetallic strip, contacts, up and down operator, arc divider or extinguisher, metal operation pin, terminal part, etc. When the actuator lever of the MCCB is at the top or the internal metal operation pin is in contact with the front part, the MCCB is turned on or off. It means trip state if the actuator lever or the internal metal operation pin moves to back side. In the UL 94 vertical combustion test, white smoke occurred from the MCCB when an average of 17~24 seconds elapsed after the MCCB was ignited and black smoke occurred when an average of 45~50 seconds elapsed. It took 5~6 minutes for the MCCB surface to be half burnt and took an average of 8~9 minutes for the MCCB surface to be entirely burnt. In the UL 94 test, the MCCB trip device operated when an average 7~8 minutes elapsed. If the MCCB trip has occurred, it may have been caused by an electrical problem such as a short-circuit, overcurrent, etc., as well as fire heat. From the entire part combustion test according to KS C 3004, it was found that the metal operation pin could be moved to the MCCB trip position without any electrical problems.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.623-633
• /
• 2002

The flame retardant and thermal properties of ortho-cresol novolac (OCN) and biphenyl epoxy blends containing red-phosphorus were investigated. For five types of compounds designed with the volume ratio of OCN and biphenyl epoxy, thermal properties were analysed by TGA or DTC, and flame retardancy effectiveness was estimated through UL-94V test. While the flame retardant and thermal properties were improved with the content of filler and red-phosphorus, the excessive amount of red-phosphorus caused to deteriorate those properties. Using the blends of OCN/biphenyl rather than pure OCN or biphenyl epoxy as a matrix the flame retardancy of composites could be improved by the synergic effects of high thermal resistance of OCN and intumescent property of biphenyl. The flame retardant me chanism of epoxy compound containing red-phosphorus could be thought of the heat-insulating effect of intumescent char-layer formed in the surface of composites.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1678-1686
• /
• 2021

In this study, we prepared phosphorous flame-retarding coating solutions by mixing triphosphate (3 phosphonate), phytic acid (6 phosphonate), or ammonium polyphosphate (10 phosphonate) with boric acid as a crosslinking agent and acryl resin binder. Prepared phosphorous flame-retarding coating solutions were coated onto non-woven fabrics, respectively, to obtain high flame-retarding effects. These prepared flame-retardant non-woven fabrics were evaluated using smoke density standard test (ASTM E662), limit oxygen index standard test (ISO E622), and vertical burning standard test (UL 94). Their flame-retarding effects were affected by the number of phosphonate groups. Regardless of natural or synthetic binder resins, their effects showed the following order: ammonium polyphosphate > phytic acid > triphosphate. Natural hydrocarbon compounds were also examined to determine the possible retardancy of binder resins. Results showed that natural hydrocarbon binder resins could be used for preparing fire-retardant nonwoven fabrics.

• Journal of Korean Library and Information Science Society
• /
• v.35 no.3
• /
• pp.79-94
• /
• 2004

This research studied the preservation treatment of the papered literature the national treasure 745-9 $\ulcorner$Keumganggyung-samgahae$\lrcorner$, discovered in 1995 from the Four Devas of Borimsa Buddhist Temple at Jangheung County, in the viewpoint of the bibliography. The overall features of the $\ulcorner$Keumganggyung-samgahae$\lrcorner$ were of 25.3cm width, 38.9cm height 1.5cm depth, 58 pages and of high-fine yellow-brown colored reef paper. The book was ruined physically in the shape and color. The covers of the book were deeply stained by the permeated rain and some internal pages were changing into brown color by corrosion. The treatment policies were； maintaining the status quo and capable repeated treatment. And the preservation treatment was done in the sequences of 1) 1st cleaning process, 2) repairing and correcting, 3) 2nd cleaning and preservation 4) cutting, binding the book and making the envelope and wood box. The post-preservation features of $\ulcorner$Keumganggyung-samgahae$\lrcorner$ were； total 64 pages and the size being 25.8 cm width 39.4cm of lenght, and 1.9cm of depth.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.21-29
• /
• 2008

Waste shell powder was added to the high density polyethylene(HDPE), and resultant mechanical properties and flame retardancy were analyzed in terms of shell content. Compatibilizer(PE-g-MA) was used to enhance the mechanical properties of the prepared HDPE/shell composites, and several flame retardant agents($Al_2O_3$, $Sb_2O_3$) were utilized to improve flame retardancy. Addition of the compatibilizer resulted in an improved mechanical properties due to the increased interfacial bonding between HDPE matrix and shell powder. In the case of impact strength, it even reached to the impact strength of pure HDPE. Also the addition of the flame retardant agents did not exhibit mechanical property decrease. UL-94 flammability test on the prepared HDPE/shell composites indicated that at 40wt% of shell only inclusion, time to ignite the flame and the total time of flame duration increased. When flame retardant agents mixed with shell powder were added to the HDPE matrix, improved flame retardancy was observed. Generally, flame retardancy effect of $Al_2O_3$ was better than $Sb_2O_3$. UL-94 V-0 classification was observed for the specimens with $Al_2O_3$ and compatibilizer at more than 40wt% shell, and also for specimens with $Sb_2O_3$ and compatibilizer at all shell content.

• Korean Journal of Veterinary Research
• /
• v.34 no.2
• /
• pp.375-379
• /
• 1994

A teratogenicity test of 'folpet' was carried out in the developing chick embryos to investigate and validate the safety of rural environmental hazardous materials. Folpet was administered to chick embryos' yolk sac at a rate of 0.1mg and 0.01mg per SPF eggs at 96 hours of incubation. The morphological changes were examined. Fertility ratio of SPF eggs used was 94.9%. Hatching rate of untreated control group was 74.4% and the group dosed with 100ul of corn oil into the yolk sac was 70.0%. The $LD_{50}$ of folpet was 0.663mg/100ul/egg. After hatching, mean body weight, body length, claw length and beak length of high and low dose administered groups were not significantly different from untreated and vehicle control group. There was no abnormal appearence in all the groups. Therefore it seems that, within the doses applied, folpet dose not induce potential teratogenicity in the developing chick embryos.

• Journal of the Korean Society of Safety
• /
• v.28 no.6
• /
• pp.17-22
• /
• 2013

The production of flame-retardant polypropylene powder coating with the addition of flame retardant (PP) controlled rheology (CR) and polypropylene, were discussed comparing the mechanical properties, such as safety and topical coating properties. Mechanical properties measurements showed almost the same as AA-1 where the flame retardant is not added. These results appear to, and because it is excellent in compatibility with polypropylene and flame retardant. Physical properties of the coating film, a test piece flame retardant organic is added, although it shows the physical properties of the coating film was stable, did not show the physical properties satisfactory is the test piece flame retardant of weapons has been added. In the safety of the topic, AA-4, AA-5 the results of thermal analysis but it is excellent, the LOI is excellent in 27.8 vol% 27.0 vol% in AA-4 and AA-2, AA-3, and 27.4 vol%, did not show many obstacles flame AA-5 result UL94.

• Journal of the Korean Society of Safety
• /
• v.22 no.2 s.80
• /
• pp.36-40
• /
• 2007

This study presents on the analysis fire hazards of electric heater. In order to analyze fire hazards fire experiment is conducted. The fire experiment is conducted to simulate normal condition and abnormal condition. The abnormal condition experiment is simulated in which combustibles are placed near by electric heater. Vertical burning test(UL 94) is conducted for the fire retardant experiment. The results show that fire hazard is high in case of abnormal condition. And Material of electric heater has not fire retardant performance. In this paper, we suggest to add temperature fuse in electric heater for reducing fire hazard.

• Macromolecular Research
• /
• v.13 no.2
• /
• pp.128-134
• /
• 2005

The phosphorus comonomer [(6-oxido-6H-dibenz<1,2>oxaphosphorin-6-yl)methyl]-methyl butane-dioate (DOP-MBDA) was synthesized through the addition reaction of dimethyl itaconate (DMI) with 9,10-dihydro­9-oxa-10-phosphaphenan threne-10-oxide (DOP). A series of novel flame retardant poly(butylene terephthalate)s (PBTs) containing different amounts of phosphorus were prepared using DOP-MBDA as a comonomer. These novel polymers were characterized by $^{1}H-NMR$, IR, and differential scanning calorimetry (DSC). The novel phosphorus­containing poly(butylene terephthalate)s, referred to as FR-PBTs, exhibited interesting thermal and mechanical behavior, as well as superior flame retardancy. These properties are attributed to the effect of incorporating the rigid structure of DOP-MBDA and the pendant phosphorus group into the poly(butylene terephthalate) (PBT) homopolymer. The UL 94-V2 rating could be achieved with this novel flame retardant PBT, which has a phosphorus content as low as $0.5 wt\%$, and the FR-PBTs emitted less fumes and toxic gases than the PBT homopolymer.

• Electronics and Telecommunications Trends
• /
• v.21 no.1 s.97
• /
• pp.94-103
• /
• 2006

기지국/단말 모뎀 검증 장치(MAT)는 기지국(AS) 모뎀, 단말(UE) 모뎀으로 구성되는 초고속 무선 전송 시스템(HM20) MIMO 구조 기지국/단말 모뎀의 자체 기능 검증과 기지국 모뎀과 단말 모뎀의 연동 시험시 오류 원인을 분석하기 위하여 상향 링크(UL)와 하향 링크(DL)의 송. 수신단의 정합부에 디지털 및 아날로그 정합을 이용하여 기지국모뎀과 단말 모뎀이 정상적으로 동작하는지를 시험하게 된다. 모뎀 검증 장치(MAT)는 상향 링크 신호는 단말 변조기의 송신 신호 수신과 기지국 복조기에 변조 신호를 송신, 하향 링크 신호는 기지국 변조기의 송신 신호 수신, 단말 복조기에 변조 신호를 송신하는 기능을 수행하여 상향 링크 신호와 하향 링크 신호를 시험 및 분석하는 기능을 수행한다.