• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.643-648
• /
• 2003

The problem considered in this paper is that the tip position of a flexible cantilever beam is controlled to follow a command signal, using a pair of piezoelectric actuators at the clamped end. The beam is lightly damped and so the natural transient response is rather long, and also since the sensor and actuator are not collocated, the plant response is non-minimum phase. Two control strategies were investigated. The first involved conventional PID control in which the feedback gains were adjusted to give the fastest closed-loop response to a step input. The second control strategy was based on an internal model control (IMC) architecture. The control filter in the IMC controller was a digital FIR device designed to minimize the expectation of the mean square tracking error. The IMC controller designed fur the beam was found to have very much reduced settling times to a step input compared with those of the PID controller.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.883-890
• /
• 2001

In practical design studies, most of designers solve multidisciplinary problems with large size and complex design system. These multidisciplinary problems have hundreds of analysis and thousands of variables. The sequence of process to solve these problems affects the speed of total design cycle. Thus it is very important for designer to reorder the original design processes to minimize total computational cost. This is accomplished by decomposing large multidisciplinary problem into several multidisciplinary analysis subsystem (MDASS) and processing it in parallel. This paper proposes new strategy for parallel decomposition of multidisciplinary problem to raise design efficiency by using genetic algorithm and shows the relationship between decomposition and multidisciplinary design optimization (MDO) methodology.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.51-59
• /
• 2001

The Government confirmed the action planning of digital mapping project for major thematic maps based on ‘Revised Plan for The Development of the National Geographic Information System’(NGIS). Mapping for major thematic maps was begun in 1998 when digital mapping project for topographic maps finished due to the delay of the action planning, and will selectively have produced the essential digital thematic maps according to the frequency of usage. The models of topographic-cadastral maps and administrative boundary maps around Suwon were produced in accordance with the presented draft. We presented specification for production of the most appropriate topographic-cadastral maps and administrative boundary maps through the analysis of the process of production, discussion and error check, and correction of the produced topographic-cadastral maps and administrative boundary maps. And we could make it easier to develop digital mapping project of topographic-cadastral maps and administrative boundary maps effectively by presenting the strategy for data input and maintenance, the cost model for carrying out the digital thematic map production, digital topographic maps, and the supplement of data model and data format. Topographic-cadastral maps has a wide range of usage but a lot of difficulties in the process of production and map update under use. So it seems that the study on users, university, private sector and municipal self-government must follow for promoting the use of topographic-cadastral maps.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2359-2373
• /
• 2008

In 1991, Korean government decided to establish the Inland Container Depot for activating transportation of rail freight container and encourage the effectiveness of intermodal transport system. Therefore, the Ui-Wang ICD has been built in Kyonggi province and began to operate in 1993. However, Despite of original purpose of the Inland Container Depot, rail freight volume at public CY(Container Yard) in Ui-Wang ICD has been recorded very low. This paper deals with the promotion strategy for rail transport in Ui-Wang ICD. The relationship of conflicts between the rail-oriented transporters and road-oriented transporters in Ui-Wang ICD have been found through the TOC thinking process and some solutions are suggested. Some undesirable effects in operation of Ui-Wang ICD are listed and current reality tree(CRT) has been established and future reality tree(FRT) which includes some injections to active the rail transport in ICD has been recommended based on CRT. In order to make good solutions the situation in Busan-jin station ICD known as similar to Ui-Wang ICD has been analyzed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1605-1611
• /
• 2017

In this study, the characteristic lifetime of power facilities such as power transformers and GIS were investigated as the basis of power facility asset management. It is difficult to obtain the operation and failure data of the facilities in Korea. Therefore, the number of failures of the electric power facilities was calculated from the operation data and hazard rate shown in the overseas literatures, and the statistical analysis was performed using the Weibull distribution function. As a result of extracting and analyzing the data of the UK National Grid for power transformers, the characteristic lifetime (scale parameter) of 116.45 years was considered to be a very appropriate value for power transformer management and can be used as a comparative data of the analysis of the domestic transformers. As for the GIS, based on the Bays and Bay-Years data and the hazard rate according to the operation years of the 123kV GIS in Germany, it is found out that the characteristic lifetime of GIS is not so meaningful. It is necessary to decide a maintenance strategy and lifetime expectancy considering the characteristics of the design, materials and manufacturing process of GIS.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2005.05a
• /
• pp.217-233
• /
• 2005

As the Kyoto Protocol will come into effect starting February 2005, 55 member countries of the Conference of Parties of the Framework Convention on Climate Change (FCCC) will be under obligation to reduce the emissions of Carbon Dioxide $(CO_2)$ by 5.2 Percent from the 1990 levels before the year 2012. Hence the development of technology to prepare for this has been accelerated in Korea. The effect of technology varies with market size of technology, and it is necessary to control technology development period, according to the size and trend of technology market. Moreover it is essential that market analysis be finished before technology development, because market on the $(CO_2)$ Reduction and Sequestration Technology expands internationally. For that reason, it is needed to analyze domestic market and to consider technology development strategy according to analysis results. In this paper, we analyzed the domestic industry and forecasted the market size, both related to the Reduction and Sequestration Technology on $(CO_2)$ emission, which is the major component of global Green House Gas(GHG).

• Journal of Information Technology Applications and Management
• /
• v.13 no.1
• /
• pp.17-38
• /
• 2006

Recently, ASP business models based on Web services are attracting considerable attention and regarded as the next generation of the ASP business models. It is, however, undesirable for ASP users to adopt them simply because the Web services are the new trend in the IT world. Instead, an in-depth comparison of the benefits against the costs between the Web services based ASP business models and the traditional models are required. Furthermore, it is desirable that this comparative analysis should be applied from the ASP users' viewpoints rather than those of the government or ASP providers. So, we have applied a comparative ROI (Return on Investment) analysis from the ASP users' perspective and shown that the Web services based ASP business models (382%) are superior to the traditional models (280%) in terms of ROI. We have also employed Balanced Scorecard (BSC) framework to keep the balance between tangible and intangible benefits considering the characteristics of IT value measurement.

• Convergence Security Journal
• /
• v.8 no.2
• /
• pp.103-109
• /
• 2008

In this paper, a study on the seeker technology in guided weapon system development. Seeker is guided weapons mounted on the device that is targeted for implementation homing guided looking for confirmation of the target after picking up, tracking, command, induce calculations necessary to induce the target's direction or control device to provide location information to perform a series of features. Therefore, the Seeker is guided weapons systems and important device that determines the performance of one guided control. Explorer is a tactical and strategy guided weapons from different goals and specifications of weapons systems development and encourage economic efficiency, Interoperability, designed to improve the reliability and hit requirements and the more numerous. Therefore, this research through the Explorer's attributes and weapons systems encourage the development direction of the technical details of the offer.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.209-217
• /
• 2020

North Korea has steadily implemented defense reforms to strengthen its national defense capabilities, and in particular, has made military technology development and military industrial capability strengthening as the focus of national defense reform. North Korea's defense reform ultimately aimed at securing nuclear posture, and as technical achievements accumulated in the Kim Jung-Un era, it led to the development of military strength such as hydrogen bombs and ICBM/SLBM. Having secured nuclear capability, North Korea is also pursuing a symmetricality in the conventional military strength by securing a strategic advantage by pursuing the modernization of the conventional weapon systems through defense reform again. Up to now, North Korea's defense reform has succeeded in establishing a new ruling system for Kim Jung-Un and creating a driving force for negotiations with the United States.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.9
• /
• pp.1341-1345
• /
• 2004

We developed a novel synthesis strategy of titania nanowire arrays by employing simple hydrothermal reaction and ion-exchange reaction techniques. Hydrothermal reactions of metallic titanium powder with $H_2O_2$ in a 10 M NaOH solution produced a new sodium titanate compound, $Na_2Ti_6O_{13}{\cdot}xH_2O$ (x~4.2), as arrays of nanowires of lengths up to 1 mm. Acid-treatment followed by calcination of this material produced arrays of highly crystalline anatase nanowires as evidenced by x-ray diffraction, Raman spectroscopy, and transmission electron microscopy studies. In both cases of sodium titanate and anatase, the nanowires have exceptionally large aspect ratios of 10,000 or higher, and they form arrays over a large area of $1.5 {\times} 3 cm^2$. Observations on the reaction products with varied conditions indicate that the array formation requires simultaneously controlled formation and crystal growth rates of the $Na_2Ti_6O_{13}{\cdot}xH_2O$ phase.