• Journal of Korean Society for Quality Management
• /
• v.8 no.2
• /
• pp.15-22
• /
• 1980

This paper deals with the problem of determining a minimum cost sampling inspection plan for a single destructive testing by attribute. The cost for inspection lot is constructed by following three cost factors: (1) cost of inspection, (2) cost of accepted defective, (3) cost of rejected lot Using Hald's Bayesian approach in a single non-destructive testing, procedure's for finding the minimum cost single destructive sampling inspection plan by attribute are given. Assuming the uniform distribution as a prior-distribution and using numerical analysis by computer, a minimum cost single destructive sampling inspection plan by attribute for several lot sizes, unit cost, destructive testing cost, and salvage cost is given.

• Journal of Korean Society for Quality Management
• /
• v.19 no.2
• /
• pp.117-124
• /
• 1991

In this paper, it is assumed that a system is composed of an essential unit and a nonessential unit. During the running of the system, an essential unit is replaced at periodic replacement time T or at nth failure of essential unit whichever occurs first. Nonessential unit is replaced at its failure and at the replacement of essential unit. This paper derive optimal replacement period which minmises the total expected cost for replacement. The unimodality of totoal maintenance cost function is proved under the assumption that hazard rate of each component is continuous and monotone increasing failure rate(IFR). Based on this condition, it is shown that the optimal replacement period is finite and unique.

• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.1-8
• /
• 1990

In this paper we present a procedure to determine the quantity of incoming materials when the nonconforming materials appear in the production process. We determined the total loss of materials $D_2$ due to fraction defectives in process and added this $D_2$ to the quantity of incoming materials $Q_0$ considered ingoing-outgoing quality level. The quantity of materials $Q_1$ as a result of this procedure should be an economic purchasing quantity and is a rectifying quantity of the EOQ determined in classical inventory model.

• Journal of Korean Society for Quality Management
• /
• v.17 no.1
• /
• pp.1-10
• /
• 1989

In general, the characteristics of components which consist of multi-component system can not be the same. This paper proposes a maintenance model of multi-component system considering the characteristics of each component. In this paper, multi-component system is divided into three components-critical unit, major unit and minor unit, respectively. This paper determines the optimal replacement time of the system which minimizes total maintenance cost, optimal replacement period of major unit and initial stock quantity of minor unit within this optimal replacement time. Numerical examples are shown when the failure times of each unit have gamma distribution.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.169-176
• /
• 2009

2008년 1월과 12월의 경기도 이천시에서의 창고화재는 재산상의 피해보다도 방재대책이 허술함과 인명피해에 대하여 사회적인 문제가 제기되었으나 건축자재, 입고 화물이외에 화재하중 등을 가중시키는 플라스틱 파렛트에 대한 거론은 없었다. 그러나 일본의 소방청 소방연구소에서는 1995년의 자동화창고의 전소화재시 화재조사를 실시한 후 방재대책으로서 플라스틱 파렛트의 화재하중 경감, 발연량 및 유해가스감축을 위한 후속대책으로 난연 파렛트에 대한 연구를 수행하였다. 그 결과 수산화마그네슘 또는 적린과 수산화마그네슘을 난연제로 사용한 플라스틱 파렛트 난연화에 성공하였다. 본고에서는 시험시설 등의 연구환경의 한계로 일본의 연구사례를 조사하고 우리나라의 난연 플라스틱 파렛트 도입방안에 대해 살펴보기로 한다.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.205-214
• /
• 2013

제주도 내 관광객수는 최근 5년간 꾸준히 증가했으며 2012년 12월을 기준으로 960만명을 돌파하였다. 서비스업의 전체 사업장 및 근로자 역시 최근 5년간 증가하였으며 서비스업 종사자의 경우 전체 근로자 173,996명의 47%를 차지하고 있다. 업무상질병자 중 근골격계질환자 수는 전체의 90%를 차지하고 있으며(2012년 12월 기준) 근로자의 신규유입이 적고 노령근로자가 많은 점을 감안하였을 때 업무상 질병 발생율은 향후 증가할 것으로 예상된다. 본 연구는 제주도 내 관광객 수 증가에 따른 서비스업 종사자의 근골격계질환 발생현황 분석으로 향후 제주도 내 발생되는 근골격계질환의 예방에 기여하고자 한다.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.61-71
• /
• 2007

최적의 효율적이고 경쟁력 있는 물류시설을 조성하기 위해 수요업체(화주)를 대상으로 입지, 임대면적, 임대조건, 임대가격, 건물의 배치, 건물의 구조, 교통처리계획, 부대시설 등에 관한 다양한 의견을 사전에 수렴, 물류시설 건립에 반영할 필요성이 대두되고 있다. 조사를 위한 시간과 비용이 과대하게 발생하는데 이러한 비효율적인 조사를 보다 효율적으로 정리하고 더 나아가 투자자의 신속하고 정확한 의사결정을 지원하기 위해서 간단하게 몇 가지의 요소만으로 사전에 진단하고 정확한 의사결정을 할 수 있는 도구의 필요성이 대두된다. 즉, 기존에는 상기에서 언급한 '수요자 접근법'을 이용하여 진행하여 왔는데, 거점적인 측면과 시설적인 측면의 요소를 반영한 새로운 "요인비교법"을 도출하였다.

• Journal of Korean Society for Quality Management
• /
• v.15 no.2
• /
• pp.2-9
• /
• 1987

The Deterioration Factor (DF) for a single pollutant within an engine family is computed as the ratio of two points on a linear regression line describing durability vehicle test results as a function of accumulated mileage. It is inteded to represent the factor by which emissions will increase during the ''useful life" of a vehicle in the engine family. Here are discribed procedures for computing the DF and how consideration of the DF is included in the development for the motor vehicle emission certification process. This paper is aimed to develop the distribution of the DF for three pollutant and to estimate the parameter values for the distribution of the DF.

• Journal of Korean Society for Quality Management
• /
• v.14 no.2
• /
• pp.2-8
• /
• 1986

This thesis is concerned with the design of control chart based on the sample median which is easy to use in practical situations and to analyze the properties for non-normally distributed Weibull process. In this cases are use to the quality characteristics of the process are not normally distributed but skewed due to the intermitted production, small lot size and sample size is small one n=3 or n=5, etc. And when it relates unsymmetrically distributed process, model designed median control chart is more effective than Shewhart $\bar{x}$-chart which assumed on normal distribution, when we exactly should be known Weibull distribution or estimated. The median control chart in this thesis is more robustness compared with other conventionally developed control chart.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.147-148
• /
• 2019

In this paper, we propose cloud-based site-oriented ERP development for a construction company. The ERP development was aimed at the development of web-based user service portal and management portal, middleware development based on WCF (Windows Communication Foundation), and client SW development based on WPF (Windows Presentation Foundation). Major developments of ERP are the process refinement of the use process of the small and medium construction, user-oriented UI design, process slimming and automation.