• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.90-95
• /
• 2004

This paper simulated partial discharge caused by 22.9[kV] power cable using XLPE(Peroxide Crosslinkable Polyethylene) insulation having the outside damage. As one of the insulation diagnostic method a radiated electromagnetic waves were measured by an UHF method using a BiconiLog antenna(EMCO-3142) and a spectrum analyzer used to measure EMI, EMC. From results of this study, It was confirmed that discharge Ogress were possible to be estimated by the proposed method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.63-64
• /
• 2017

In this paper, we studied a design method for a coplanar waveguide-fed compact quasi-Yagi antenna for a dual band of the UHF RFID (915 MHz) and GPS (1.575 GHz). The proposed antenna is composed of three elements of a dipole, a reflector, and a director. To reduce its size, the ends of both the dipole and reflector are bent, the director is placed near to the dipole, and a balun is incorporated in the antenna. From some simulations, the proposed antenna using an FR4 substrate with 0.8 mm thickness was designed for the operations in the UHF RFID and GPS systems, and the antenna characteristics such as reflection coefficient, gain, and radiation patterns were examined.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1148-1157
• /
• 2013

In a passive UHF RFID system, the impedance matching between tag antenna and chip as well as the protocol parameter settings in a reader plays important role in determination of the maximum read-range. Almost no paper, however, has dealt with the above issues in relation with the maximum read range. In this paper, two known methods (of using the value from data sheets and proprietary RFID tester) and our proposing method in chip impedance evaluation are compared in terms of maximum read range. The read range of tags whose antenna impedance is conjugate matched with the chip impedance obtained from the proposed method is improved maximum 73 % more than that of tags from the other methods.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.151-156
• /
• 2021

The speed and direction of the earth's fluid motion is measured by a remote sensing method using electromagnetic waves. Using UHF radar and GPS Sonde, the vertical profile of fluid velocity was calculated by the Euler measurement method and the Lagrange measurement method, respectively. Since the wind direction, which is the direction of motion of the atmosphere, is indicated in the direction of the wind blowing, and a circular value of 0° - 360° is used, it is necessary to pay attention to statistical analysis. Errors caused by calculation conditions are provided, and the corrected accuracy of comparison results is improved by 400%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.15-21
• /
• 2016

In this paper, we considered a design method of a compact quasi-Yagi antenna for portable UHF RFID readers. The antenna consists of a dipole driver and a reflector printed on a dielectric substrate, and it is fed by a microstrip line. In order to reduce the antenna size, the dipole and reflector are bent and the balun between the feeding microstrip line and coplanar strip (CPS) line is integrated within the CPS line. The effects of the geometrical parameters of the proposed antenna on the antenna performance are examined, and the parameters are adjusted to be suitable for the operation in UHF RFID band (902-928 MHz). The size of the fabricated antenna is $70mm{\times}75mm$, and the experiment results reveal a frequency band of 892-942 MHz for a voltage standing wave ratio < 2, a gain > 3.5 dBi, and a front-to-back ratio > 6.6 dB over the frequency band for UHF RFID.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1857-1859
• /
• 2004

It is widely known that the ultra high frequency (UHF) method that detects the electromagnetic wave of the PD pulses in the gas insulated space is one of the most competitive methods for its high sensitivity. From the above point of view, this paper describes the noise suppression methods and the PD measurement results of the in-service substation by the developed UHF PD measurement system which consists of the external UHF coupler, the UWB LNA and the digital storage oscilloscope. As results, it was found that the effect of the noise suppression methods were verified and that the developed external UHF coupler showed a better detection sensitivity than a conventional external coupler.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.189-190
• /
• 2003

현장에서 많이 사용되고 있는 GIS에 결함이 발생하면 치명적인 사고로 진전될 수가 있다. 본 논문은 모의 GIS내 도전성 파티클 존재시 발생되는 부분방전 신호를 절연 진단 방법중 하나인 UHF법을 이용해 부분방전시 방사되는 방사전자파의 스펙트럼을 분석해 부분방전 진전과정을 판단하였다. 이러한 연구는 현장 GIS 및 $SF_6$ 가스절연 전력설비의 전기적 신뢰성 확보를 위해 UHF 법을 이용한 절연진단 시스템 개발에 중요한 역할을 할 것으로 사료된다.

• Bulletin of the Korean Mathematical Society
• /
• v.25 no.2
• /
• pp.179-183
• /
• 1988

In this paper we study a $C^{*}$-dynamical system (A, G, .alpha.) where A is a UHF-algebra, G is a finite abelian group and .alpha. is a *-automorphic action of product type of G on A. In [2], A. Kishimoto considered the case G= $Z_{n}$, the cyclic group of order n and investigated a condition in order that the fixed point algebra $A^{\alpha}$ of A under the action .alpha. is UHF. In later N.J. Munch studied extremal tracial states on $A^{\alpha}$ by employing the method of A. Kishimoto [3], where G is a finite abelian group. Generally speaking, when G is compact (not necessarily discrete and abelian), $A^{\alpha}$ is an AF-algebra and its ideal structure was well analysed by N. Riedel [4]. Here we obtain some conditions for $A^{\alpha}$ to be UHF, where G is a finite abelian group, which is an extension of the result of A. Kishimoto.oto.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1719-1724
• /
• 2013

In this paper, a size-reduction technique is presented for the RFID reader antenna working at two UHF bands. To tackle the problem of size increase in multi-band applications, two resonance paths are made to occur in one geometry with a single feed. While one resonance path is combined with the other, the entire geometry is determined to guarantee the resonance at the target frequencies through the dual-band input impedance matching. The antenna performance is predicted by the full-wave simulation, and the design method is verified by observing the good agreement between the simulated and measured results. At the two frequencies, the satisfactory return loss as well as the antenna efficiency and peak gain of the far-field pattern is obtained.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.151-152
• /
• 2006

Gas Insulated Switchgear 내부에서 발생되는 부분방전 검출을 위하여 다양한 UHF센서가 이용되고 있다. 그러나 출력단의 신호크기가 극히 미약하여 다단계 증폭과정과 아날로그/디지털 신호처리 기술들이 적용되고 있으며 이로 인한 신호 왜곡이 필연적이어서 그 해결방안이 다양하게 제시되고 있다. 하나의 방안으로서 UHF 출력신호를 광 신호 형태로 전송할 수 있는 광소자와 Optical Fiber의 장점을 이용하면 기존에 상용화되어 있으나 문제를 야기 시키는 신호처리 기술 대체가 가능하다. 본 논문에서는 GIS 진단 기술개발을 위하여 자체 개발된 광 기술을 적용하여 검출된 미세신호들의 왜곡 문제점 해결에 기여하고자한다.