• 한국ITS학회:학술대회논문집
• /
• v.2006 no.10
• /
• pp.179-181
• /
• 2006

톨게이트에서 사용되는 UHF RFID 비발디 배열 안테나를 설계하였다. 안테나의 주파수 대역은 미국 기준의 RFID UHF 대역으로 $902{\sim}928MHz$이다. 안테나 설계는 먼저 단일소자 비발디 안테나를 설계한 후, 전력분배 비율 0.3:1:1:0.3으로 $1{\times}4$ 배열한 안테나로 설계하였다. 설계된 배열 안테나는 VSWR 2:1이하에서 $850{\sim}942MHz$인 S11 특성을 보였다. 이득은 최대방사 9.93dBi를 얻었다. 안테나 제작은 주파수를 높여 scale down하여, 1소자 비발디를 제작하고 이의 특성을 측정하였다.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.5
• /
• pp.217-222
• /
• 2008

The characteristics of UHF antenna with microstrip structure was studied. Design parameters as center frequency, band width, and VSWR by slot length, stub was analyzed by HFSS simulator. UHF antenna with microstrip structure was fabricated using FR4_epoxy substrate of 4.4 dielectric constant.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.974-977
• /
• 2012

In this letter, a small-sized ultra-high frequency (UHF) RFID tag antenna for a medical sample tube is proposed. The RFID tag antenna is designed and fabricated based on the circular loop antenna used in the UHF band (Korea standard, 917 MHz to 923.5 MHz). The tag antenna size is reduced using a circular meander stub. The antenna has a physical size of 8 mm, which is about ${\lambda}$/40 in electrical length. The proposed tag antenna is molded into a medical sample and multitag identification is performed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.65-70
• /
• 2006

A UHF band RFID passive tag antenna, which can be attached on metallic objects, is proposed. The proposed tag antenna is more insensitive to the size of the metallic object than conventional PIFAs or IFAs. It is constructed on a multi-layer and its size is reduced by using a 'L' slit. Performances of the antenna is analyzed by Ansoft's HFSS and measured using a back-scattering method. The simulated and measured data are obtained with varying the size of metallic object.

• Journal of IKEEE
• /
• v.16 no.1
• /
• pp.62-68
• /
• 2012

The planar microstrip antenna for the safety communication of life at sea is designed and manufactured to effectively receive the emergency wireless signal from the transmitter on the life vest. The proposed microstrip antenna in this paper is easy to make, light weight and cheap compared to other antennas because of printed antenna fabrication. To overcome the narrow bandwidth, large size and low gain characteristics of microstrip antenna, we use the IDMA(Identical Dual Patch Microstrip Antenna with Air-Gap) structure. The proposed antenna was fabricated with the use of 1.6mm FR4 and measured with the 28.7MHz(6.6%) of bandwidth and 3.04dBi of gain at the frequency of 426MHz. To validate the proposed antenna, we experimented the possible distance range at sea using the commercial UHF transceiver module and obtained over 5km distance for stable communication. This antenna can be widely applied to application of the UHF wireless mobile communication.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.209-214
• /
• 2019

This paper presents the design of a 920 MHz ultra-high frequency(UHF) band radio frequency identification(RFID) conductive fabric tag antenna. The resistance values of four different conductive fabrics are measured, and the conductivities of the fabrics are calculated. The fabric with the best conductivity is selected, and the best conductivity of the fabric is used to simulate the fabric tag antenna design. The fabric UHF RFID tag antenna with a T-Matching structure and name-tag size of $80{\times}40mm$ is simulated and designed. The simulated and measured results are compared, and a laundry test is performed. The reading range of the fabric tag antenna is about 2 m. This fabric tag can be easily applied to an entrance control system as it can be attached to other fabrics and cloths.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.57-58
• /
• 2018

In this paper, we studied a design method for a quasi-Yagi antenna operating over a broad bandwidth covering the UHF RFID(902-928 MHz) and GNSS(1,164-1.605 MHz). The proposed antenna is composed of three elements(dipole, reflector, and director) and fed by a coplanar waveguide. To reduce its size, a balun is integrated inside the antenna, and the ends of both the dipole and reflector are bent. Broadband impedance matching was obtained by placing the director near to the dipole and loading a chip capacitor inside the antenna. The antenna, designed through simulations, was fabricated on an FR4 substrate with 0.8 mm thickness. The experiment results for the antenna characteristics agree very well with the simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.761-767
• /
• 2012

In this paper, a novel ultra-wideband planar monopole antenna for the UHF communications and Digital-TV reception is proposed. The proposed antenna fed by a coplanar waveguide(CPW) is based on a triangular patch that has a broadband characteristic. To further increase the bandwidth of the triangular patch antenna, the top side of the regular triangular patch is loaded with a notch cut and each oblique side with a step. In addition, a slope is given to the ground plane of the CPW structure. Experimental results show that the -10 dB return loss bandwidth of the proposed antenna is 2,320 MHz from 480~2,800 MHz(5.83:1 bandwidth), which covers all the frequency bands of the various wireless communication systems and Digital TV broadcasting in the UHF band. Within the entire operating frequency range, the measured antenna gain in y-z plane(E-plane) varies from 3.01 to 4.71 dBi.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1719-1724
• /
• 2013

In this paper, a size-reduction technique is presented for the RFID reader antenna working at two UHF bands. To tackle the problem of size increase in multi-band applications, two resonance paths are made to occur in one geometry with a single feed. While one resonance path is combined with the other, the entire geometry is determined to guarantee the resonance at the target frequencies through the dual-band input impedance matching. The antenna performance is predicted by the full-wave simulation, and the design method is verified by observing the good agreement between the simulated and measured results. At the two frequencies, the satisfactory return loss as well as the antenna efficiency and peak gain of the far-field pattern is obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.282-287
• /
• 2007

A circular UHF RFID tag has been designed. This circular tag antenna can be optimized simply by controling two parameters, outer radius and inner radius of the tag antenna. The resistance and resistance values of the tag antenna have been researched based on the variation of inner and outer radii of the circular tag antenna. The simulation and measurement results are compared.