• Steel and Composite Structures
• /
• v.22 no.3
• /
• pp.691-712
• /
• 2016

In this editorial, buckling analytical investigation of the nanocomposite plate with square cut out reinforced by carbon nanotubes (CNTs) surrounded by Pasternak foundation is considered. The plate is presumed has square cut out in center and resting on Pasternak foundation. CNTs are used as amplifier in plate for diverse distribution, such as uniform distribution (UD) and three patterns of functionally graded (FG) distribution types of CNTs (FG-X, FG-A and FG-O). Moreover, the effective mechanical properties of nanocomposite plate are calculated from the rule of mixture. Domain decomposition method and orthogonal polynomials are applied in order to define the shape function of nanocomposite plate with square cut out. Finally, Rayleigh-Ritz energy method is used to obtain critical buckling load of system. A detailed parametric study is conducted to explicit the effects of the dimensions of plate, length of square cut out, different distribution of CNTs, elastic medium and volume fraction of CNTs. It is found from results that increase the dimensions of plate and length of square cut out have negative impact on buckling behavior of system but considering CNTs in plate has positive influence.

• Steel and Composite Structures
• /
• v.27 no.2
• /
• pp.149-159
• /
• 2018

Thermo-mechanical buckling of sandwich beams with a stiff core and face sheets made of functionally graded carbon nanotube-reinforced composite (FG-CNTRC) within the framework of Timoshenko beam theory is presented. The material properties of FG-CNTRC are supposed to vary continuously in the thickness direction and are estimated through the rule of mixture. Also the properties of these materials should be considered temperature dependent. The governing equations and boundary conditions are derived by using Hamilton's principle and solved using an efficient technique called the Differential Transform Method (DTM) to achieve the critical buckling of the sandwich beam in uniform thermal environment. A detailed parametric study is guided to investigate the effects of carbon nanotube volume fraction, slenderness ratio, core-to-face sheet thickness ratio, and clamped-clamped, simply-simply and clamped-simply end supports on the critical buckling behavior of sandwich beams with FG-CNTRC face sheets. Numerical results for comparison of sandwich beams with uniformly distributed carbon nanotube-reinforced composite (UD-CNTRC) face sheets with those with FG-CNTRC face sheets are also presented.

• Water for future
• /
• v.24 no.3
• /
• pp.36-41
• /
• 1991

1960년대 초부터 미 국립항공우주국(NASA)에서 기상위성을 지구궤도에 올리면서 시작되고 우주개발 선도국들에 의해 수 없이 발사되어 지구상공을 선회하고 있는 각종 실험위성, 자원탐사위성들로부터 이전까지만해도 지엽적이고 단편적인으로 알려지던 지구환경현황들이 이제는 지구전체에 대한 시시각각의 정보로 확대되고 있다. 기상위성들에 장착된 Sensor들로는 구름과 기상현상의 분포는 물론이고 각 대양의 해수면 온도 분포들이 파악되고 있으며 식물지수에 의한 지상의 식물분포의 계절적 변화양상에서 열대림의 사막화 추세들까지도 분석된다. 특히 위성탐사에 의한 남극 오존홀 (Ozone Hole)의 확인은 최근악화 되고 있느 swlrnchs 환경문제에 대한 커다란 주의를 환기시켜 주었다. 대양의 Phytoplankton 분포가 계절에 따라 위성자료에 의해 분석되므로서 해양의 생산능력(Productivity)의 변화도 알게되고 있다. 해양수면의 높이를 측정했던 초단파(microwave)영역의 SAR 자료는 구름을 투과하여 지구표면을 전천후 Monitoring할 수 있는 다음 세대의 Sensor로 각광을 받고 있으며 앞으로 유럽과 일본, 카나다, 소련 등에서 이들 새로운 Sensor들이 탑재 될 자원탐사 위성(ERS)과 RADASAT 등의 위성이 계속해서 개발되고 있어 이들에 의한 지구환경상태 진단은 크게 각광받게 될 것이다. 그외에도 해면풍 운량, 총강우량 분포, 대기 투명도, 대기의 열수지등의 계절적 변화에 대한 인공위성자료 해석을 통하여 지구의 온난화nas제가 본격적으로 ud가되고 있다. 또한 자원탐사위성인 Landsat 과 SPOT 등의 위성에 의해서는 각대륙의 토지 이용도 변화, 토사의 이도, 지질도 작성, 입체도 제착등과 농산물수확량의 예측있어서 괄목할 만한 발전이 계속되고 있다. 더욱이 NASA와 일본, 유럽등에서 지구관측을 위해서 준비하고 있는 각종 지구관측위성(EOS)들이 실용화 될 2000년 대에는 일반 지구환경감시는 물론 수계환경 감시 체계구축에 획기적인 진전이 있을 것으로 기대된다.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.4
• /
• pp.13-18
• /
• 2015

Considering dredged ground is consolidated more than one meter, Compression index prediction is very important. But, UD-sampling and consolidation test are impossible because of high moisture content and weak shear strength. This paper demonstrates the compression index relation, $C_{c(d)}=F(e_d,C_c)$, between in-situ and dredged clay using N. Keith Tovey's Omega point and soil physical properties. Good relationship is confirmed between proposed formula and measured primary consolidation result on dredged ground in The Republic of Korea.

• KIEAE Journal
• /
• v.13 no.3
• /
• pp.21-26
• /
• 2013

Recently, as the concern over environmental problem has been serious all over the world, carbon has become a key issue to mitigate the problem. In the field of Architecture, various sustainable assessment systems and LCCO2 assessment strategies have been developed, guiding low carbon building while planning. However, assessment system for low carbon neighborhood, which can be more efficient strategy, is still in the stage of research. In this paper, as a research for low carbon assessment system and planning guideline for neighborhood, scope meeting domestic condition has been set and sustainable assessment system for neighborhood, which is similar to low carbon concept, have been compared. LEED-Neighborhood Development, BREEAM-Communities, CASBEE-Urban Development, and GBCC-Apartment Houses were used for comparison. As a result, it is found that those systems has many differences in judging system, aggregating method, scope of evaluation, and relations with a building assessment system. The concern about carbon is not insufficient yet. Finally, assessment system for low carbon neighborhood, which is not only for establishing the plan, but also for giving guideline at the very first state of the plan, should be developed as fast as passible. With the result of this paper, establishment of assessment criteria and the way to measure quantitative $CO_2$ should be studied forward.

• Journal of Sensor Science and Technology
• /
• v.19 no.4
• /
• pp.271-277
• /
• 2010

Intravenous(IV) drip therapy is extensively used for all kinds of treatments. It works by delivering medicine directly into the vein. When the medicine has been fully dispensed, a dangerous situation occurs since air in the IV drip bag could enter the patient's vein, which is hazardous to the patient’s safety. In this paper, using capacitive sensors to detect the residual quantity of a plastic IV drip pack is proposed. A simulation model of this technology was shown by a finite elements analysis(FEA) program to find out its feasibility and analyze the proper geometrical dimension of a capacitive sensor. According to the FEA simulation, 3 kinds of capacitive sensors were attached to the bottom surface of the plastic IV drip bag to detect the residual quantity in the experiment. Experimental data showed an agreement with the FEA simulation model estimation and confirmed that the sensor works.

• Design & Manufacturing
• /
• v.10 no.2
• /
• pp.6-11
• /
• 2016

Designed patterns of slit are introduced to the uni-directional (UD) prepreg in order to enhance the formability of the carbon/epoxy composites without wrinkling and laddering. Three different types of the slit alignment along the thickness direction are applied to analyse the deformation behavior during the compression moulding process of laminates. Degrees of the slit open and the mechanical strength are evaluated based on the level of the compaction pressure in the course of forming process. Results have shown that the mechanical strength of laminates having slits could attain at least 80% of the conventional ones without slits. However, further studies are required to identify the direct relevance of the slit alignment in laminate to the mechanical properties.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.641-644
• /
• 2005

The aim of this research is to evaluate the relationship between the total effective moment $(M^E)$ and Bemoulli-Euler bending moment (M) when the ply orientations of UD CFRP in Piezoelectric Zirconate Titanate Composite Actuator (PZTCA) are changed. The obtained results as follows. Firstly, as the performance test results by the CFRP ply orientation, the performance of [0] and [90] were stable. However, while the performance of [+45] was suddenly decreased after 5 hours. Secondly, the change of $M^E$ by the CFRP ply orientation was evaluated. As the CFRP ply orientation was increased from [0] to [+60], the $M^E$ were gradually decreased. However, they became a little bit increased from [+60] to [90]. Finally, after the change of M by the CFRP ply orientation was evaluated, it was found that $M^E=2.2M$ was valid for just [0] and that there was a relationship between $M^E$ and M according to the ply orientation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.222-224
• /
• 2006

A non-vacuum process for $Cu(In,Ga)Se_2$ (CIGS) thin film solar cells from nanoparticle precursors was described in this work CIGS nanoparticle precursors was prepared by a low temperature colloidal route by reacting the starting materials $(CuI,\;InI_3,\;GaI_3\;and\;Na_2Se)$ in organic solvents, by which fine CIGS nanoparticles of about 20nm in diameter were obtained. The nanoparticle precursors were mixed with organic binder material for the rheology of the mixture to be adjusted for the doctor blade method. After depositing the mixture of CIGS with binder on Mo/glass substrate, the samples were preheated on the hot plate in air to evaporate remaining solvents ud to burn the organic binder material. Subsequently, the resultant (porous) CIGS/Mo/glass simple was selenized in a two-zone Rapid Thermal Process (RTP) furnace in order to get a solar ceil applicable dense CIGS absorber layer. Complete solar cell structure was obtained by depositing. The other layers including CdS buffer layer, ZnO window layer and Al electrodes by conventional methods. The resultant solar cell showed a conversion efficiency of 0.5%.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.2
• /
• pp.161-171
• /
• 2019

Personality factors and ethical values are considered as vital element in social and professional life. This present research aims to explore the relationship between Personality and Job Satisfaction. Further, we tried to test the moderating effect of Islamic work ethics (IWE) in the relationship of Personality traits with Job satisfaction. Convenience sampling was used in defining sample as in Pakistan there is no data base which provides information regarding number of employees. Due to moderating variable the data has been collected from respondents who identify themselves as Muslim. To collect data from respondents Self-administered, close-ended questionnaires and e-questionnaire were used in this study and respondents were targeted in the normal working environment. Correlation and regression analysis was used to analyze the data statistically. The results of study indicated that neuroticism exhibits significant negative effect on job s atisfaction. Also, openness to experience, agreeableness and conscientiousness showed positive effect on job satisfaction. Whereas, extraversion exhibits no effect on job satisfaction and IWE has a negative effect on job satisfaction. However, the output indicates that IWE do not act as moderator in the relation of agreeableness and conscientiousness with job satisfaction moderation effect of IWE is observed between the relationship of neuroticism, extraversion and openness to experience with job satisfaction.