• Computers and Concrete
• /
• v.26 no.2
• /
• pp.137-150
• /
• 2020

In this paper, the bending behavior of single-walled carbon nanotube-reinforced composite (CNTRC) laminated plates is studied using various shear deformation plate theories. Several types of reinforcement material distributions, a uniform distribution (UD) and three functionally graded distributions (FG), are inspected. A generalized higher-order deformation plate theory is utilized to derive the field equations of the CNTRC laminated plates where an analytical technique based on Navier's series is utilized to solve the static problem for simply-supported boundary conditions. A detailed numerical analysis is carried out to examine the influence of carbon nanotube volume fraction, laminated composite structure, side-to-thickness, and aspect ratios on stresses and deflection of the CNTRC laminated plates.

• Structural Engineering and Mechanics
• /
• v.53 no.3
• /
• pp.497-517
• /
• 2015

In this study, nonlocal nonlinear buckling analysis of embedded polymeric temperature-dependent microplates resting on an elastic matrix as orthotropic temperature-dependent elastomeric medium is investigated. The microplate is reinforced by single-walled carbon nanotubes (SWCNTs) in which the equivalent material properties nanocomposite are estimated based on the rule of mixture. For the carbon-nanotube reinforced composite (CNTRC) plate, both cases of uniform distribution (UD) and functionally graded (FG) distribution patterns of SWCNT reinforcements are considered. The small size effects of microplate are considered based on Eringen's nonlocal theory. Based on orthotropic Mindlin plate theory along with von K$\acute{a}$rm$\acute{a}$n geometric nonlinearity and Hamilton's principle, the governing equations are derived. Generalized differential quadrature method (GDQM) is applied for obtaining the buckling load of system. The effects of different parameters such as nonlocal parameters, volume fractions of SWCNTs, distribution type of SWCNTs in polymer, elastomeric medium, aspect ratio, boundary condition, orientation of foundation orthtotropy direction and temperature are considered on the nonlinear buckling of the microplate. Results indicate that CNT distribution close to top and bottom are more efficient than those distributed nearby the mid-plane for increasing the buckling load.

• Journal of Biomedical Engineering Research
• /
• v.31 no.1
• /
• pp.20-26
• /
• 2010

The aim of this study was to test the feasibility of a wireless transceiver that can be inserted into the ear canal. The wireless technology could minimize the cosmetic problems of patients, and it can be applied to binaural hearing aids for improving speech perception. In order to implement the ear canal insertable transceiver, simple finite-difference time-domain (FDTD) simulations were carried out to determine the feasibility, and the hardware of the transceiver was implemented within the ear shell. The size of the implemented transceiver was only $7{\times}7mm$, and it could successfully transmit signals to external devices. In order to measure the radiation pattern, a simple RF phantom was used, and the maximum attenuation from the phantom was observed to be 23 dB when the reference antenna was placed at a distance of 2 m from the transmitter.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.3
• /
• pp.129-137
• /
• 2015

Various personalized services are provided based on user context these days, and IoT(Internet of Things) devices provides effective ways to collect user context. For example, user's activity such as walking steps, calories, and sleeping hours can be collected using smart activity tracker. Smart scale can sense change of user's weight or body fat percentage. However, these services are independent to each other and not easy to make them collaborate. Many standard bodies are working on the documents for this issue, but due to diversity of IoT use case scenarios, it seems that multiple IoT technologies co-exist for the time being. This paper propose a framework to collaborate heterogeneous IoT services. The proposed framework provides methods to build application for heterogeneous IoT devices and user context management in more intuitive way using HTTP. To improve compatibility and usability, gathered user contexts are based on MPEG-UD. Implementation of framework and service with real-world devices are also presented.

• Fibers and Polymers
• /
• v.5 no.1
• /
• pp.31-38
• /
• 2004

In the present paper, a variety of fiber reinforcements, for instance, stabilized OXI-PAN fibers, quasi-carbon fibers, commercial carbon fibers, and their woven fabric forms, have been utilized to fabricate pseudo-unidirectional (pseudo-UD) and 2-directional (2D) phenolic matrix composites using a compression molding method. Prior to fabricating quasi-carbon fiber/phenolic (QC/P) composites, stabilized OXI-PAN fibers and fabrics were heat-treated under low temperature carbonization processes to prepare quasi-carbon fibers and fabrics. The thermal conductivity and thermal expansion/contraction behavior of QC/P composites have been investigated and compared with those of carbon fiber/phenolic (C/P) and stabilized fiber/phenolic composites. Also, the chemical compositions of the fibers used have been characterized. The results suggest that use of proper quasi-carbonization process may control effectively not only the chemical compositions of resulting quasi-carbon fibers but also the thermal conductivity and thermal expansion behavior of quasi-carbon fibers/phenolic composites in the intermediate range between stabilized PAN fiber- and carbon fiber-reinforced phenolic composites.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1203-1207
• /
• 2008

For a large sized, ultra definition (UD) and high refresh rate for motion blur free AMLCD TVs, amorphous IGZO thin film transistor (TFT) are applied and investigated in terms of threshold voltage ($V_{th}$) shift influenced by active layer thickness uniformity, source drain etching technology, heat treatment and passivation condition. Optimizing above parameters, we fabricated the world's largest 15 inch XGA AMLCD successfully.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.365-376
• /
• 2014

Objective:The objective of this study is to apply the principals and policies of universal design to offer a safe and efficient workplace for older workers. Background: The concept of universal design has rapidly developed under the paradigm that tasks should be easy and comfortable for all people with diverse features. The concept is also fitting when designing a workplace. Method: Legislations, policies and precedents of workplaces with older workers have been studied and analyzed. The compilation has been used to project the present and future of employing universal design at workplace devisal. Results: Every country has its own legislations/policies regarding universal design, flexible working, and age-friendly workplaces to increase hire of older workers. The basic concept of UD and its application is explained. This study provides guidelines for employing universal design at workplaces and preventing accidents for older workers. Conclusion: Following the principals of universal design is expected to furnish a comfortable and safe workplace and lengthen the period of workers participating in the labor force in an ageing society. Application: This study offers the principles for universal design, serving as fundamental research for its application to the workplace.

• Advanced Composite Materials
• /
• v.16 no.4
• /
• pp.361-376
• /
• 2007

Disposing of conventional fiber-reinforced polymers (FRPs) poses an environmentally challenging problem. Disposal of FRPs by combustion discharges carbon dioxide in the air because the resin of FRPs is made of fossil fuel. When they are disposed of in the ground, FRPs remain semipermanently without decomposing. In response to these problems, green composites are now being developed and are extensively studied as a material that produces a lower environmental burden. In this paper, green composites using kenaf fiber yarn bundles and PLA (poly(lactic acid)) are fabricated and their tensile properties are evaluated in the experiment. The tensile Young's modulus of all of the laminations is larger than that of PLA alone and the tensile strength of some laminations is larger than that of PLA alone. In particular, the value of UD composite of $0^{\circ$ shows double the tensile strength of PLA alone. Furthermore, the molding conditions for fabricating with a hot press are investigated and the heat resistant tensile properties of green composites are also reported.

• Computers and Concrete
• /
• v.19 no.5
• /
• pp.515-526
• /
• 2017

Recent trend is to use the lightweight concrete in the construction industry because it has several advantages over normal weight concrete. The Lightweight concrete can be produced from the industrial waste materials. In South East Asian region, researchers are very keen to use the waste materials such as oil palm shell (OPS) and palm oil clinker (POC) from the palm oil producing industries. Extensive research has been done on lightweight concrete using OPS or POC over the last three decades. In this paper the aggregate properties of OPS and POC are plotted in conjunction with mechanical and structural behavior of OPS concrete (OPSC) and POC concrete (POCC). Recent investigation on the use of crushed OPS shows that OPSC can be produced to medium and high strength concrete. The density of OPSC and POCC is around 20-25% lower than normal weight concrete. Generally, mechanical properties of OPSC and POCC are comparable with other types of lightweight aggregate concrete. It can be concluded from the previous study that OPSC and POCC have the noteworthy potential as a structural lightweight concrete.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3619-3622
• /
• 2016

Background: Triple negative breast cancers (TNBCs) are high grade aggressive tumors generally with a poor prognosis, not responding to hormonal and anti Her2 Neu therapy. Expression of the antiapoptotic B cell lymphoma 2 gene (Bcl-2) is associated with low grade, slowly proliferating hormone receptor positive tumors with improved survival. Anti Bcl2 agents can be used as alternative targeted therapy in triple negative cancers. Materials and Methods: The objective of this study was to determine the immunohistochemical expression of Bcl2 in triple negative breast cancers and any correlation with clinicopathological variables in Northern Pakistan. Results: All 52 patients were females, aged between 28 and 80 years(average $48.0{\pm}12.1$). 28 cases (53.8%) were positive for Bcl2, this being associated with low grade invasive ductal carcinomas, lymph node metastasis and lymphovascular invasion. Conclusions: Bcl-2 may be an important prognostic factor and its expression might be used for targeted therapy using Anti Bcl2 drugs.