• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.4
• /
• pp.232-245
• /
• 2017

In this study, the high-resolution numerical simulation results considering landuse characteristics are analyzed by using single layer Urban Canopy Model (UCM) in Weather Research Forecast (WRF). For this, the impact of urban parameters such as roughness length and anthropogenic heat in UCM is analyzed. These values are adjusted to Seoul metropolitan area in Korea. The results of assessment are verified against observation from surface and flux tower. Forecast system equipped with UCM shows an overall improvement in the simulations of meteorological parameters, especially temperature at 2 m, surface sensible and latent heat flux. Major contribution of UCM is appreciably found in urban area rather than non-urban. The non-urban area is indirectly affected. In simulated latent heat flux, applying UCM is possible to simulate the change similarly with observations on urban area. Anthropogenic heat employed in UCM shows the most realistic results in terms of temperature and surface heat flux, indicating thermodynamic treatment of UCM could enhance the skills of high resolution forecast model in urban and non-urban area.

• Atmosphere
• /
• v.20 no.1
• /
• pp.13-26
• /
• 2010

The Urban Canopy Model (UCM) implemented in WRF model is applied to improve urban meteorological forecast for fine-scale (about 1-km horizontal grid spacing) simulations over the city of Seoul. The results of the surface air temperature and wind speed predicted by WRF-UCM model is compared with those of the standard WRF model. The 2-m air temperature and wind speed of the standard WRF are found to be lower than observation, while the nocturnal urban canopy temperature from the WRF-UCM is superior to the surface air temperature from the standard WRF. Although urban canopy temperature (TC) is found to be lower at industrial sites, TC in high-intensity residential areas compares better with surface observation than 2-m temperature. 10-m wind speed is overestimated in urban area, while urban canopy wind (UC) is weaker than observation by the drag effect of the building. The coupled WRF-UCM represents the increase of urban heat from urban effects such as anthropogenic heat and buildings, etc. The study indicates that the WRF-UCM contributes for the improvement of urban weather forecast such nocturnal heat island, especially when an accurate urban information dataset is provided.

• Journal of Environmental Science International
• /
• v.29 no.1
• /
• pp.45-54
• /
• 2020

High-resolution meteorological simulations were conducted using a Weather Research and Forecasting (WRF) model with an Urban Canopy Model (UCM) in the Ulsan Metropolitan Region (UMR) where large-scale industrial facilities are located on the coast. We improved the land cover input data for the WRF-UCM by reclassifying the default urban category into four detailed areas (low and high-density residential areas, commercial areas, and industrial areas) using subdivided data (class 3) of the Environmental and Geographical Information System (EGIS). The urban area accounted for about 12% of the total UMR and the largest proportion (47.4%) was in the industrial area. Results from the WRF-UCM simulation in a summer episode with high temperatures showed that the modeled temperatures agreed greatly with the observations. Comparison with a standard WRF simulation (WRF-BASE) indicated that the temporal and spatial variations in surface air temperature in the UMR were properly captured. Specifically, the WRF-UCM reproduced daily maximum and nighttime variations in air temperature very well, indicating that our model can improve the accuracy of temperature simulation for a summer heatwave. However, the WRF-UCM somewhat overestimated wind speed in the UMR largely due to an increased air temperature gradient between land and sea.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.1989-1999
• /
• 1999

Many people are the latest interested in the integration of the WWW and database systems. The UCM(United CGI Management) system, which is proposed on this study, is based on the method using CGI that does not change existing servers and clients to integrate the WWW and database system. Since the CGI executable architecture executes a CGI program whenever the database is accessed, the system performance is reduced greatly when many request to the database are made simultaneously. However, the UCM system improves the system performance since it uses the integrated CGI running a daemon process. Moreover, the proposed system can use the WWW database more economically and doesn't use the SQL because it does not use a DBMS. In UCM system, we define the extended HTML tags to implement the WWW database interface and use the EXODUS storage manager for accessing the database.

• Journal of Embryo Transfer
• /
• v.33 no.2
• /
• pp.85-97
• /
• 2018

The trans-differentiation potential of mesenchymal stem cells (MSCs) is employed, but there is little understanding of the cell source-dependent trans-differentiation potential of MSCs into corneal epithelial cells. In the present study, we induced trans-differentiation of MSCs derived from umbilical cord matrix (UCM-MSCs) and from dental tissue (D-MSCs), and we comparatively evaluated the in vitro trans-differentiation properties of both MSCs into corneal epithelial-like cells. Specific cell surface markers of MSC (CD44, CD73, CD90, and CD105) were detected in both UCM-MSCs and D-MSCs, but MHCII and CD119 were significantly lower (P < 0.05) in UCM-MSCs than in D-MSCs. In UCM-MSCs, not only expression levels of Oct3/4 and Nanog but also proliferation ability were significantly higher (P < 0.05) than in D-MSCs. In vitro differentiation abilities into adipocytes and osteocytes were confirmed for both MSCs. UCM-MSCs and D-MSCs were successfully trans-differentiated into corneal epithelial cells, and expression of lineage-specific markers (Cytokeratin-3, -8, and -12) were confirmed in both MSCs using immunofluorescence staining and qRT-PCR analysis. In particular, the differentiation capacity of UCM-MSCs into corneal epithelial cells was significantly higher (P < 0.05) than that of D-MSCs. In conclusion, UCM-MSCs have higher differentiation potential into corneal epithelial-like cells and have lower expression of CD119 and MHC class II than D-MSCs, which makes them a better source for the treatment of corneal opacity.

• Korean Journal of Applied Biomechanics
• /
• v.32 no.3
• /
• pp.87-93
• /
• 2022

Objective: The purpose of this research was to investigate the age-related changes in whole-body motor variability during sit-to-stand (STS) task. It has been reported that children perform motor tasks less accurately with greater variability as compared to adults. However, it is still unknown how they utilize the abundant degrees of freedom and accomplish voluntary actions. Uncontrolled manifold (UCM) analysis has been used to partition motor variabilities into two independent variability components, task-relevant variability (V_ORT) and task-irrelevant variability (V_UCM). We investigated what differences exist between children and adults with respect to these two motor variability components in relation to motor development stages. Method: Ten 6-year-old children (height: 116.2 ± 4.3 cm, weight: 23.1 ± 3.9 kg, motor development assessment percentile score: 77.5 ± 18.6%), ten 10-year-old children (height: 138.7 ± 7.2 cm, weight: 35.8 ± 10.3 kg, motor development assessment percentile score: 73.9 ± 12.7%), and ten young adults (age: 23 ± 1.6 year-old, height: 164.3 ± 11.4 cm, weight: 60.8 ± 12.0 kg) participated in this study. Each participant performed STS ten times, and a motion capture system was used to capture the whole-body kinematics. Each segment centers of mass and the whole-body center of mass were calculated, and UCM analysis was used to quantify motor variabilities, V_ORT and V_UCM. One-way ANOVA was used for statistical analysis. Results: We found that children produced more motor variabilities in V_ORT and V_UCM in all three dimensions, anterior-posterior, medial-lateral, and vertical. As age increased, both, V_ORT and V_UCM significantly decreased (p<.05). Conclusion: The greater V_ORT found in children compared to adults indicates that the repeatability over repetitions improves through development, while the greater V_UCM found in children suggests that children better utilize the abundant degrees of freedom during STS compared to adults.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.112-122
• /
• 2011

In this paper, we adopt a concept of UCM(User Created Market) to develop STOWAR system which is user can use their smart phone at anytime, anywhere to directly forming a market at virtual space and other's also can access to this market trade with other users. This system is optimized for effectiveness of information alert and ease way to access information by selective event notification feature which can expected with activation of service.

• Korea-Australia Rheology Journal
• /
• v.21 no.3
• /
• pp.149-153
• /
• 2009

Profile development of the melt spinning process of poly(ethylene terephthalate) (PET) was simulated by a numerical method under the consideration of two constitutive equations of Newtonian and upper convected Maxwell (UCM) models. The viscoelastic characteristics of the polymer were considered via UCM constitutive equation that considered relaxation time as a function of temperature and molecular weight. The UCM model predicted the diameter profile better than the Newtonian, while velocity development was slower than the Newtonian model. Viscoelasticity played an important role in accurately predicting diameter profile. However, even though neck-like deformation was observed in the UCM model, the exact position of the deformation under high speed spinning was not obtained.

• The Korean Journal of Pharmacology
• /
• v.27 no.1
• /
• pp.81-88
• /
• 1991

The bilateral castration of male mice was operated under light ether anesthesia, and the sham operated mice were considered as the uncastrated. The treatments of mice with the following steroids were started one hour after operation. Hydrocortisone 50 mg/kg (HC), dehydroepiandrosterone 250 mg/kg (DHEA), ${\beta}-estradiol$ 5 mg/kg (E2), and testosterone 20mg/kg (TS) were subcutaneously injected into male ICR mice at noon for four days. Animals were sacrificed in the next-morning (at 10-12 A.M.) after the last injection. The intestinal putrescine(PT) content was lower and the liver and intestinal spermine(SM) contents were higher in castrated mice(CM), comparing with those of uncastrated mice (UCM). The intestinal PT content of UCM was markedly increased HC. But all brain polyamines of CM were significantly decreased by it. And HC also increased the spermidine(SD) content of kidney and liver and the intestinal PT content in CM. E2 induced the marked increase of liver PT content with the moderate increase of renal SD in UCM. And E2 significantly increased the brain and liver PT contents and the all renal polyamine contents in CM. Both of DHEA and TS induced the increase of renal PT content in UCM, and they also induced the marked increases of all renal polyamines of CM. In addition, TS increased the brain SM of CM. These results suggest that the steroidal regulation mechanism of brain, kidney, liver, and intestine seems to be different from one another, and the renal activity of polyamine synthesis can be markedly enhanced by sex steroids.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.153-159
• /
• 2019

Job creation is the most important issue in the labor market these days, and the quality of jobs is also very important in order to resolve the mismatches that are taking place in the labor market. Kim Young-min (2014) developed the "2012 Quality of Employment Index" with twenty indicators in seven categories, including employment opportunities, to objectively assess the local labor market. This method presents the concept of the aggregate indicator, 'Quality of Work Index', and has the advantage of being easy to produce. However, it is difficult to statistically verify the adequacy of the constitutive indicators and, based on this, make them a single aggregate index through statistical techniques. Therefore, we developed an alternative '2012 Descent Work Index' and a confidence interval using Principal Component Analysis(PCA) and Unobserved Component Model(UCM) presented by Gi-Choon Kang & Myung-jig Kim (2014) and also calculated an alternative '2017 Descent Work Index' using the first half of 2017 local area labour force survey and compared its changes by region. The results of the empirical analysis show that the rank correlation coefficient between two methods of aggregating indicators, simple weight used in Young-min Kim's research, PCA method and UCM used in this study, were found to be statistically significant under 5% significance level. This implies that all methods are found to be useful. However, the PCA and UCM which determine scientific and objective weights based on data are preferred to Young-min Kim's approach. Since it provides us not only the level of aggregate indicator but also its confidence intervals, it is possible to compare ranking with the consideration of statistical significance. Therefore, it is expected that the method of constructing an aggregating indicator using UCM will be widely used in many areas in the future.