• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.271-272
• /
• 2024

현재 자동차 산업은 내연기관에서 전기차 시스템으로 접어들고 있다. 전 세계적으로 탄소 중립 정책이 이를 가속화하고 있으며, 자동차 제조사들은 기존 내연기관 시스템으로는 불가능했던 기술들을 개발하고 있다. 대부분의 전기차에는 PMSM이 적용되고 있는데 부피가 크고 무거우며 토크 밀도가 낮다는 단점이 있다. AFPM은 기존 PMSM의 단점을 개선한 모터로, 부피와 무게가 작으며 토크밀도가 높다는 장점이 있어 전기차의 In-Wheel Motor System과 UAM에 적용되는 모터이다. 하지만 전기차는 도로 주행만 가능하고 UAM은 비행만 할 수 있기 때문에, 미래 모빌리티인 전기자동차와 UAM이 통합된 모빌리티를 개발하고자 한다. 본 과제에 적용되는 AFPM모터는 PMSM의 단점을 보완할 수 있기 때문에 전기차-UAM 트랜스포밍 모빌리티의 모터로 적합하다. 이 모빌리티는 자동차와 UAM의 역할을 모두 수행할 수 있어 효율적인 이동을 돕고 도시의 교통 인프라 문제를 완화할 수 있다.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.2
• /
• pp.27-38
• /
• 2022

Urban air mobility (UAM) has recently attracted lots of attention as a solution to urban centralization and global warming. Electric vertical take-off and landing (eVTOL) is a concept that emerges as one of the promising and clean technologies for UAM. There are two difficult challenges for eVTOL aircraft to solve. One is how to improve the weight efficiency of aircraft, and the other is how to complete long-range missions for UAM's flight scenarios. To approach these challenges, we propose a consolidated concept design of battery-fuel cell hybrid tiltrotor aircraft with a liquid hydrogen (LH₂) fuel tank. The efficiency of a battery-fuel cell hybrid powertrain system on the designed eVTOL aircraft is compared to that of a battery-only powertrain system. This paper shows how much payload can increase and the flight scenario can be improved by hybridizing the battery and fuel cell and presenting a detailed concept of a cryogenic storage tank for LH₂.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.701-706
• /
• 2023

The Korean government and industry have presented a roadmap for the commercialization of UAM services and are promoting it in earnest. In order to introduce full-scale UAM services, there are various issues to be solved, such as the development of high-performance aircraft, the design of network bases and corridors, the optimization of operation management, and the establishment of related laws and systems. In this study, in terms of optimizing operation management, we will examine research trends by field, focusing on Korea, and derive research topics that need to be solved in the future. Korean researchers have suggested that research is centered on UAM service usage fees, usage intentions and acceptance models, and vertiport location selection, but operational optimization studies such as service order acceptance, aircraft repositioning, and battery charging and maintenance scheduling are needed in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.1-14
• /
• 2022

In this study, in order to analyze the preference for UAM of public transportation users following the introduction of urban air transportation(UAM), A preference consciousness(SP) survey was conducted on 840 users of Incheon public transportation using the Incheon International Airport-Incheon Gil Hospital route, which is the urban air traffic(UAM) demonstration route section. In addition, the means selection model was estimated based on the results of conducting a preference consciousness (SP) survey. As a result of analyzing the time value for travel using the established means selection model, it was found to be 56,428 won/hour, As a result of verifying the elasticity of travel cost (won), in-vehicle time (minutes), and out-of-vehicle time (minutes) in the model, the effect on the urban air traffic (UAM) share in this model was found that travel cost (won), in-vehicle time (minutes), and out-of-vehicle time (minutes) were in order, and the effect was greater when the travel cost (won) decreased than when it increased.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.2
• /
• pp.99-107
• /
• 2022

Urban Air Mobility (UAM) such as a drone taxi is one of the future transportations that have recently been attracting attention. Along with the construction of an urban terminal, an accurate landing system for UAM is also essential. However, in urban environments, reliable Global Navigation Satellite Systems (GNSS) signals cannot be received due to obstacles such as high-rise buildings which causes multipath and non-line of sight signal. Thus, the positioning result in urban environments from the GNSS signal is unreliable. Consequently, we propose the Ultra-Wideband (UWB) network to assist the soft landing of UAM on a vertiport. Since the positioning performance of UWB network depends on the layout of UWB anchors, it is necessary to optimize the layout of UWB anchors. In this paper, we propose a two-steps genetic algorithm that consists of binary genetic algorithm involved multi objectives fitness function and integer genetic algorithm involved robust solution searching fitness function in order to optimize taking into account Fresnel hole effects.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.1
• /
• pp.74-81
• /
• 2021

UAM(Urban Air Mobility) systems have evolved in the form of helicopters in the 1960~1970s, tiltrotors in the 1980s, small aircraft transportation systems in the 2000s, and electric-powered Vertical Take-Off and Landing (eVTOL) in the 2010s; accordingly, the early heliport has evolved to its current form of a Vertiport. Vertical Takeoff and Landing Sites, Vertiports, are important factors for the successful introduction of UAM, along with the resolution of air traffic control (ATC), air security, and noise problems. However, there are no domestic or international installation standards and guidelines yet. Therefore, in this study, installation standards were prepared by referring to domestic and international case studies, ICAO standards, and MIT research papers. The study proposes to establish standards for Final Approach and Takeoff Area (FATO) as 1.5D, 1D for Touchdown and Lift-Off Area (TLOF), and 1.5D for Safety Area (SA). It also proposes to add "UAM Vertiport Installation Standards" to the 「Act on the Promotion and Foundation of Drone Utilization, Drone Act」.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.804-814
• /
• 2023

Various buildings are scattered below and around the flight path of UAM (Urban Air Mobility), which flies within a densely populated urban area. And the vertiport used by UAM for takeoff and landing is located on a flat area within the city center or on top of a building. As such, UAM operates in densely populated urban areas, and vertiports for takeoff and landing are installed in densely populated areas, requiring a very high level of safety. In particular, for safe landing of UAM, it is necessary to monitor the approach status of UAM approaching the vertiport from the final approach course and provide approach information. Accordingly, to monitor the UAM vertiport final approach path, research was conducted on technology that utilizes optical equipment that can be installed in a narrow site and has the advantage of reducing the burden of electromagnetic waves.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.639-648
• /
• 2023

In modern society, UAM (Urban Air Mobility) transportation system is being developed as an alternative to urban traffic congestion and environmental problems, and electric vertical take-off and landing (eVTOL) is a combination of vertical take-off and landing function and electric power. It is attracting attention as an innovative next-generation transportation method as an eco-friendly alternative that reduces noise and air pollution by providing efficient mobility within the city. Since eVTOL development requires designing and implementing airframes suitable for various mission purposes, the power system needs to be developed as a platform concept before airframe development. In this study, we empirically proposed a test bench concept equipped with a stable power supply and an efficient control system, essential in developing a power platform with a combined function in the form of a fuselage and module type specialized for various mission purposes. The proposed drivetrain platform test bench consists of a system verifying the stable take-off and landing software and a power platform adjusting the motor's thrust. It will serve as a verification system that can be developed.

• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.269-273
• /
• 2023

Based on the K-UAM roadmap, this study was conducted to select major education and training subjects necessary for the composition of the initial UAM pilot education and training curriculum. Currently, UAM aircraft have similar characteristics to rotorcraft that can take off and land vertically around VTOL functions. Therefore, in this study, the Rotary Wing Pilot Training Curriculum of the Army Aviation School, which represents Rotary Wing Flight Education, was selected as a comparative group, and education and training subjects for initial UAM pilot training were selected. First, a hierarchical structure for the AHP survey was designed based on the Army's rotorcraft pilot education and training subjects, and the AHP survey was conducted by selecting experts from each class. If the education and training subjects given as priorities through AHP analysis are applied to initial UAM pilot training, it is expected to contribute to the effect of education and training and ultimately to the safe operation of UAM.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.29-36
• /
• 2024

Recently, the concept of Urban Air Mobility (UAM) has expanded to Advanced Air Mobility (AAM). A tilt rotor type of vertical take-off and landing aircraft has been actively studied and developed. A tilt-rotor aircraft can perform a transition flight between vertical and horizontal flights. A blade pitch angle control system can be used for flight stability during transition flight time. In addition, Individual Blade Control (IBC) can reduce noise and vibration generated in transition flight. This paper proposed Disturbance Observer Based Control (DOBC) and Time Delay Control (TDC) for individual blade control of an Electro-Mechanical Actuator (EMA) based blade pitch angle control system. To compare and analyze proposed controllers, numerical simulations were conducted with DOBC and TDC.