• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.12
• /
• pp.1117-1125
• /
• 2004

In this study, in order to utilize the waste heat of industrial wastewater in the range of the relatively low temperature of 40～5$0^{\circ}C$ as a heat source, a hybrid heat pump system was considered by computer simulation method. In the simulation, an absorber, desorber and solution heat exchanger were modelled by UA values while a compressor and pump performance were specified by an isentropic efficiency. Simulation results show that the performance of hybrid heat pump can be up to 80% higher than that of conventional R134a heat pump when it makes a process hot water of 9$0^{\circ}C$ while the wastewater is cooled down to 2$0^{\circ}C$. As the absorber pressure increases, the system performance and deserter pressure increase with a favorable effect of a compressor discharge gas temperature drop.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.782-787
• /
• 2008

The Kalina cycle simulation study was carried out for a preliminary design of a geothermal power generation system. The Kalina cycle system can be used for the utilization of a low-temperature heat sources such as geothermal and industrial waste heat that are not hot enough to produce steam. The sea/river water can be considered as a cooling media. A steady-state simulation model was developed to analyze and optimize its performance. The model contains a turbine, a pump, an expansion valve and heat exchangers. The turbine and pump were modelled by an isentropic efficiency, while a condenser, an evaporator and a regenerative heat exchanger were modeled by UA-LMTD method with a counter-flow assumption. The simulation results show that the power generation efficiency over 10% is expected when a heat source and sink inlet temperatures are $100^{\circ}C$ and $10^{\circ}C$ respectively.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.3
• /
• pp.250-255
• /
• 2005

The objective of this paper is to develop a new energy transport system for district cooling application by using type 2 absorption cycle. Cold energy from the LNG storage system is utilized as the cooling source of the condenser and the rectifier. The pressures of the system, UAs of the evaporator and the desorber, and the inlet temperatures of the refrigerant to each component are considered as the key parameters. The results show that UA of the evaporator is more dominant parameter on COP than that of the desorber and the optimum system pressure for the demand side is estimated as 525 kPa. For the present system, it is recommended that the refrigerant inlet temperature of the evaporator be lower than $4.3^{\circ}C$ for long-distance transportation. It is concluded that the cold energy from the LNG storage system can be effectively applied to the long-distance transportation system for district cooling application with the type 2 absorption cycle. The optimum operation conditions are also predicted from the parametric analysis.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.5
• /
• pp.175-182
• /
• 2002

The email system is one of the most popular internet applications used to transmit and exchange personal information. However, the pattern of existing email system is fixed, and the system cannot be expanded or re-used. This thesis has proposed the system which can provide the users with better e-mail data which is flexible, re-usable, and expandable XML data on the web-mail. The process of change is as follows: First, make the XML data to have a tree structure using DOM API and then bring the received messages of the users with the CDONTS. Last, transform the received messages into the element and element value. When the e-mail data is transformed t the XML data, 'the data' and 'the presentation' can be distinguished, which enables the users to see messages according to each individual's unique need. With this system, the user can not only convert data to XML, but also can combine the data segments to a form of letter box in order to manage data conveniently and search the data.

• Korean Journal of Veterinary Service
• /
• v.33 no.1
• /
• pp.89-96
• /
• 2010

Hematological and serum biochemical values were assessed from 20 clinically healthy Japanese Macaques raised in Everland Zoological Gardens and compared to the International Species Information System (ISIS) reference range that is used internationally as standard for wildlife animals. Taking our standard on sexual maturation at age 4, tRBC values in Macaques under age 4 were significantly lower than those over age 4, but the Hb and PCV values were significantly higher. Compared to the ISIS standard, the tRBC values in Macaques under age 4 were significantly lower whereas the Hb and MCHC values were significantly higher. Moreover, in the samples of Macaques over age 4, the PCV and MCV values were significantly lower than the ISIS standard. On serum biochemistry values the creatinine and amylase values in the Macaques under age 4 were significantly lower than those over age 4. In comparison with the ISIS standard, the values of ALT, ALP, BUN, IP, $Ca^{2+}$ and $K^+$ in the Macaques under age 4 did have no significant difference. The values of TP, GGT, tBil, amylase, TG and UA were significantly higher than the ISIS standard, but the values of albumin, AST, glucose, creatinine, cholesterol, CPK, LDH, $Na^+$ and Clwere significantly lower. In contrast, the values of TP, albumin, ALT, ALP, creatinine, cholesterol, amylase, TG, IP and $Na^+$ in the Macaques over age 4 did have no significant difference, but the values of GGT, BUN, tBil, UA and $Ca^{2+}$ were significantly higher, while the values of AST, glucose, CPK, LDH, $K^+$ and $Cl^-$ were significantly lower. On the other hand, there was no significant difference in hematological and serum biochemical values between the groups of male and female.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.3
• /
• pp.113-127
• /
• 2015

Recently, there has been a growing interest in UAS(Unmanned Aerial System), and it is required to develop techniques to effectively detect water body from the recorded images in order to implement flood monitoring using UAS. This study used a UAS with RGB and NIR+RG bands to achieve images, and applied supervised classification method to evaluate the accuracy of water body detection. Firstly, the result for accuracy in water body image classification by RGB images showed high Kappa coefficients of 0.791 and 0.783 for the artificial neural network and minimum distance method respectively, and the maximum likelihood method showed the lowest, 0.561. Moreover, in the evaluation of accuracy in water body image classification by NIR+RG images, the magalanobis and minimum distance method showed high values of 0.869 and 0.830 respectively, and in the artificial neural network method, it was very low as 0.779. Especially, RGB band revealed errors to classify trees or grasslands of Songsan amusement park as water body, but NIR+RG presented noticeable improvement in this matter. Therefore, it was concluded that images with NIR+RG band, compared those with RGB band, are more effective for detection of water body when the mahalanobis and minimum distance method were applied.

• Journal of Korea Water Resources Association
• /
• v.38 no.11
• /
• pp.937-946
• /
• 2005

The objective of the study is to develop a reservoir optimal operation model and to suggest the appropriate amount of additional water supply and optimal operation rule. The model uses multiple objective function and a global search method, SCE-UA method. The objective function is set up to maintain the storage at target level, to satisfy the water demand, and to maximize the hydropower product. To evaluate the model's applicability, the model was applied for allocating the optimal water depending on storage level changes of Seomjin dam. The results comparing optimal operation and historical data showed that hydropower product increased from $-2.29\%$ to $14.51\%$, $-5.94\%$ to $3.98\%$, and $-0.43\%$ to $6.35\%$ with varying target levels in wet, dry, and normal period, respectively. Also, The model was applied for assessing water supply capacity of Seomjin dam to satisfy increasing water demand. The dam was operated by the model on consideration of downstream flow as 0.17, 0.50, 0.70, 1.0, 1.5, and $3.0\;m^3/sec$. The results showed that in case of operating the dam with downstream flow less than $0.70\;m^3/sec$ and with target water level lower than 194.0 m, hydropower product was more than the historical operation data and existing amount of water supply was less influenced.

• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.3
• /
• pp.178-184
• /
• 2005

Carry over contamination has been reduced in some systems by flushing the internal and external surfaces of the sample probe with copious amount of diluent. It between specimens should be kept as small as possible. A built-in, continuous-flow wash reservoir, which allows the simultaneous washing of the interior and exterior of the syringe needles, addresses this issue. In addition, residual contamination can further be prevented through the use of efficient needle rinsing procedures. In discrete systems with disposable reaction vessels and measuring cuvets, any carry over is entirely caused by the pipetting system. In analyzers with reuseable cuvets or flow cells, carry over may arise at every point through which high samples pass sequentially. Therefore, disposable sample probe tips can eliminate both the contamination of one sample by another inside the probe and the carry over of in specimen into the specimen in the cup. The results of the applicative carry over experiment studied on 21 items for total protein (TP), albumin (ALB), total bilirubin (TB), alkaline phosphatase (ALP), aspratate aminotranferase (AST), alanine aminotranferase (ALT), gamma glutamyl transferase (GGT), creatinine kinase (CK), lactic dehydrogenase (LD), creatnine (CRE), blood urea nitrogen (BUN), uric acid (UA), total cholesterol (TC), triglyceride (TG), glucose (GLU), amylase (AMY), calcium (CA), inorganic phosphorus (IP), sodium (Na), potassium (K), chloride (CL) tests in chematology were as follows. Evaluation of process performance less than 1% in all tests was very good, but a percentage of ALB, TP, TB, ALP, CRE, UA, TC, GLU, AMY, IP, K, Na, and CL was 0%, implying no carry over. Other tests were ALT(-0.08%), GGT(-0.09%), CK(0.08%), LD(0.06%), BUN(0.12%), TG (-0.06%), and CA(0.89%).

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.4
• /
• pp.9-19
• /
• 2014

The objective of this study was to evaluate of the Tank model in simulating runoff discharge from rural watershed in comparison to the SWAT (Soil and Water Assessment Tool) model. The model parameters of SWAT was calibrated by the shuffled complex evolution-university Arizona (SCE-UA) method while Tank model was calibrated by genetic algorithm (GA) and validated. Four dam watersheds were selected as the study areas. Hydrological data of the Water Management Information System (WAMIS) and geological data were used as an input data for the model simulation. Runoff data were used for the model calibration and validation. The determination coefficient ($R^2$), root mean square error (RMSE), Nash-Sutcliffe efficiency index (NSE) were used to evaluate the model performances. The result indicated that both SWAT model and Tank model simulated runoff reasonably during calibration and validation period. For annual runoff, the Tank model tended to overestimate, especially for small runoff (< 0.2 mm) whereas SWAT model underestimate runoff as compared to observed data. The statistics indicated that the Tank model simulated runoff more accurately than the SWAT model. Therefore the Tank model could be a good tool for runoff simulation considering its ease of use.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.40.1-40.1
• /
• 2015

Off-axis reflective optical systems have attractive advantages relative to their on-axis or refractive counterparts, for example, zero chromatic aberration, no obstruction, and a wide field of view. For the efficient operation of off-axis reflective system, the surface accuracy of freeform mirrors should be higher than the order of wavelengths at which the reflective optical systems operate. Especially for applications in shorter wavelength regions, such as visible and ultraviolet, higher surface accuracy of freeform mirrors is required to minimize the light scattering. In this work, we propose the error compensation algorithm (ECA) for the correction of wavefront errors on freeform mirrors. The ECA converts a form error pattern into polynomial expression by fitting a least square method. The error pattern is measured by using an ultra-high accurate 3-D profilometer (UA3P, Panasonic Corp.). The measured data are fitted by two fitting models: Sag (Delta Z) data model and form (Z) data model. To evaluate fitting accuracy of these models, we compared the fitted error patterns with the measured error pattern.