• Parasites, Hosts and Diseases
• /
• v.28 no.2
• /
• pp.101-108
• /
• 1990

Surgically collected cystic fluid of Taenia solium metacestodes from patients of intracranial cystic lesion were compared in their protein composition with those from naturally infected pigs in Cheju Do, Korea and Ecuador. In non-denaturing discontinuous-polyacryla aide gel electrophoresis (disc-PAGE) , no discernible differences were recognized in banding patterns between the cystic fluids from Cheju Do and Ecuador, and between the cystic quids from pigs and human lesions except wider bands that corresponded to human albumin and T-globulin (in 4 of 9 patients). In reducing SDS-PAGE, bands in the cystic Ruid from Ecuador showed the same banding pattern with that from Cheju Do but two bands of 21 and 17 kDa were stained darker. Cystic quids (rom patients revealed the same protein compositions of the major protein bands of 94, 64, 15, 10 and 7 kDa as in the cystic fluid of pig origin, but human albumin (66 kDa), heavy and light chains of gamma globulin (55 and 22.5 kDa) were contaminated in 4 of 9 cystic fluids. Human CSF proteins seem to have been contaminated during cystic ftuid collection. In any cystic quid from patients, the majcr Protein component was 150 kDa which was subdivided into 15, 10 and 7 kDa in reducing SDS-PAGE.

• Journal of Embryo Transfer
• /
• v.22 no.2
• /
• pp.127-135
• /
• 2007

Components of cholesterol, glucose, minerals (selenium, Ca, p) and vitamin E in blood and milk were collected and analyzed weekly after calving from a total of 78 Holstein cows. In this study, we examined changes of chemical components, correlations among them, and factors affecting the changes. The results were summarized as follows; 1 Average levels of components in blood during 9 weeks after calving were 178.8 mg/dl, 62.3 mg/dl, 8.9 mg/dl, 7.4 mg/dl, 52.2 ng/ml, $10.3{\mu}g/ml$, 16.3 mg/dl, 15.3 ng/dl, and 15.8 mg/dl for cholesterol, glucose, Ca, P, selenium, vitamin E, BUN (blood urea nitrogen), MSe (milk selenium), and MUN (milk urea nitrogen), respectively. 2. The levels of cholesterol, glucose selenium, vitamin E and MSe tended to increase over time after calving. 3. The estimated correlations among components were negative(-) for cholesterol and p, positive for selenium, and BUN and also positive for BUN and MUN. Glucose showed positive correlations with P and MSe. 4. For factors influencing the changes of components, there were significant differences in glucose and selenium for age, in selenium and vitamin E for parity, in glucose and MSe for milk and in all components except Ca and selenium for feeding grass and hay, respectively. In urea nitrogen, age and parity only showed significant difference in MUN. In conclusion, the results were suggested that changes of blood and milk components depend on feeding during the postpartum. Especially, we could ascertain that selenium in blood and milk is the important factor for the dairy cows after parturition.

• Journal of Navigation and Port Research
• /
• v.35 no.3
• /
• pp.197-204
• /
• 2011

The authors adopt the Unmanned Undersea Vehicle(UUV), the shape of which is like a manta. They call here it Manta UUV. Manta UUV has been designed from the similar concept of the UUV called Manta Test Vehicle(MTV), which was originally built by the Naval Undersea Warfare Center of USA(Lisiewicz and French, 2000; Simalis et al., 2001; U.S. Navy, 2004). The present study deals with the effect of Reynolds numbers on hydrodynamic forces acting on Manta UUV at large angles of attack. The large angles of attack cover the whole range of 0 to ${\pm}$ 180 degrees in horizontal plane and in vertical plane respectively. Static test at large attack angles has been carried out with two Manta UUV models in circulating water channel. The authors assume that the experimental results of hydrodynamic forces (lateral force, yaw moment, vertical force and pitch moment) are analyzed into two components, which are lift force component and cross-flow drag component. First of all, Based on two dimensional cross-flow drag coefficient at 90 degrees of attack angle, the cross-flow drag component at whole range of attack angles is calculated. Then the remainder is assumed to be the lift force component. The only cross-flow drag component is assumed to be subject to Reynolds number.entstly the authors suggest the methodology to predict hydrodynamic derivertives acting on the full-scale Manta UUV.

• Journal of Acupuncture Research
• /
• v.28 no.4
• /
• pp.57-64
• /
• 2011

Objectives : The aim of this study is to overview the current status of Cochrane systematic review of acupuncture. Methods : Published Cochrane systematic reviews and protocols for evaluating acupuncture and/or moxibustion were searched by the terms 'acupuncture' and 'moxibustion' in Issue 1, Cochrane Library, 2011. Only reviews or protocols that regarded acupuncture or moxibustion as primary methods of intervention in their reviews were included. Data regarding first author national affiliation, intervention and disease, as well as the number of reviews or protocols that included Korean, Chinese, or Japanese databases in search strategies were obtained. Results : We found 92 hits at screening, and 59 studies were eligible for this review. Included interventions were acupuncture (n=56), auricular acupuncture (n=2), and moxibustion (n=1) for various diseases and conditions. The number of publications of Cochrane systematic reviews or protocols increased gradually from 2002 to 2011. First authors' affiliations were located in China (n=32), Australia (n=8), UK (n=7), Canada (n=4), U.S. (n=4), Germany (n=2), Norway, (n=1) and Korea (n=1). 44, four and four Cochrane reviews adopted Chinese, Korean and Japanese databases, respectively. Conclusions : Search strategies in a substantial number of Cochrane reviews or protocols for acupuncture and moxibustion heavily relied on Chinese databases. Korean databases were underused in existing Cochrane reviews and protocols, and Korean authors were much less involved in the Cochrane systematic reviews or protocols than Chinese authors. Further studies need to be conducted in order to incorporate evidence of acupuncture reported in Korean databases into the Cochrane systematic reviews.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.21-25
• /
• 2001

기계부품의 소형화 , 고속화, 그리고 저공해, 저소음이 요구되는 세계적인 추세에서 정밀가공기술은 기계 및 전자산 업에서 중요한 위치를 차지하게 되었다. 특히, 무심연삭공정(Centerless Grinding)은 높은 생산성과 정확한 치수 형성의 능력이 있어서 원통형상을 가공하는 중요한 생산공정으로 사용되어 왔다. 예컨대 VCR의 소형 축. Computer Disk Drive, 초소형 모터, 연료분사기등은 쎈터레스 연삭공정을 통하여 높은 정밀도를 얻고 있다. 하지만 이 공정의 특수성과 측정의 어려움으로 인하여 이러한 정밀형상의 형성과정은 아직도 잘 밝혀져있지 않다. 무심연연삭 공정에서는 부품이 기계에 고정되어 있지 않고 공작물 받침날 위에 올려져 있으며 조절바퀴와 연삭바퀴 사이에 눌려져 있다. 조절바퀴가 마찰력으로 공작물을 돌려주며 연삭바퀴에서 연삭가공이 일어나게 된다. 조절바퀴와 연삭바퀴사이의 거리는 기계 자체의 탄성변형으로 인하여 항시 변화하게 되며 이 거리의 변화가 공작물의 정밀형상 형성에 결정적인 영향을 미치게 된다. 본 연구에서는 무심연삭공정중 공작물과 받침날, 조절바퀴, 연삭바퀴의 상대운동을 기하학적으로 해석하였다. 특히 간섭조건을 사용하여 실제 공작물의 운동을 해석하여 순간 명목 절삭깊이를 구하였다. 또한 연삭 특성실험식을 이용하여 수직 연삭력을 구하고 연삭기의 탄성변형을 구하여 순간 실제 절삭깊이를 계산하였다. 그로부터 진원도형성에 관한 기본식을 유도하였다. 본 연구에서 유도된 진원도 형성 식을 이용하여 실험과 동일한 조건으로 컴퓨터 시뮬레이션을 수행하였다. 그리고 원형중의 어떤 이상형상, 즉, 홈또는 돌기는 반복되어서 다른 돌기 또는 홈을 형성 하게되며 그 반복주기는 공작물이 조절바퀴와 연삭바퀴위에 떠있는 각도에 따라 결점 됨을 확인하였다.'유창성' 에 그 목표를 두고 있는 점을 감안한다면, 시작단계부터 반드시 정확한 발음을 지녀야 하는 가의 문제도 생각해 볼 필요가 있다. 경우에 따라서는, 정확한 발음은 그 언어에 대한 숙련도가 점차 높아짐에 따라 이와 병행하여 이루어지는 경우도 흔히 경험하는 일이기 때문이다. 결국 초등영어 교육과정에도 명시되어 있듯이 '...영어에 대한 친숙함과 자신감을 심어주고, 영어에 대한 흥미와 관심을 지속적으로 유지시키는 것이 중요하기' 때문에 무엇보다 중요한 측면은 흥미와 관심을 유지시키는 지적인 학습활동보다는 정의적인 학습활동의 전개가 필요하다고 하겠다. 유리된 AA의 세포독설과 관련된 세포내의 역할에 대해 의문이 제기되었다., PCL에 SOD-1도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.171-180
• /
• 2011

MAI (multiple aperture SAR interferometry) method has been recently developed to improve the measurement accuracy of along-track surface deformation. By means of split-beam SAR processing, this novel technique produces forward- and backward-looking interferograms, which are combined to generate an MAI interferogram. The along-track surface deformation can then be derived from the MAI interferogram. The achieved accuracy of the along-track surface deformation is approximately 8 cm for interferograms with a coherence of 0.6. It is commonly recognized that the topographic phase on an MAI interferogram can be ignored. However, in this paper, we have generated an MAI interferogram from an ALOS P ALSAR interferometric pair spanning the 2010 Haiti earthquake, and shown that the topographic phase distortion on the MAI interferogram can reach to about $3.45{\times}10^{-4}$ rad./m. This distortion corresponds to an along-track surface deformation of about 98 cm. We have proposed an efficient method to remove the topographic phase distortion. After correcting the distortion, the topographic phase distortion on the MAI interferogram is reduced to about $7.82{\times}10^{-6}$ rad./m. This means that the proposed method can effectively remove the topographic distortion on the MAI interferogram to improve along-track surface deformation measurement.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.4
• /
• pp.454-464
• /
• 1986

To find main factors to affect tobacco culture and quality, NC 2326 (Nicotiana tabacum L.) was cultivated in Korea and in the United States under different plant density, fertilization, mulching and curing. Among the chemical characteristics of the both experimental soils, the organic matters were similar concentration in both locations but effective phosphorous contents were higher in Oxford in the United States. Plant height, length and width of the largest leaf, leaf thickness, and midrib ratios were larger in Oxford than in Suwon in Korea. Also they were larger in non mulching system than in mulching system. But the total numbers of the leaves were decreased in non mulching system. The content of nicotine was higher in the plant grown in Suwon than in Oxford. The concentrations of nicotine and sugar tend to increase in mulching system comparing of non mulching system. During the growing, the concentration of non-volatile organic acids was higher in Suwon, while it was lower in cured leaf produced in Suwon. Also the contents of total fatty acids were lower in the harvested leaf grown in Suwon, but not in cured tobacco. Forty three compounds identified among the volatile oils from these experimental samples were quantified. The concentrations of the major components related to the tobacco flavour such as damascone, damascenone, solanone, nor-solanadione, and megastigmatrienones were higher in the cured tobacco produced in Oxford rather than in Suwon.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.89-89
• /
• 2012

선행 연구에서는 m-Aramid와 p-Aramid의 Ring 방적사/Core 방적사 조건에 따른 방적사 물성에 대해서 연구하였는데, Ring 방적사의 혼용율, 스핀들 속도에 따른 물성 변화, Core 방적사의 공정특성에 따른 방적성, 피복성에 대해 연구를 하였다. 그 결과 Ring 방적사의 경우 m-Aramid의 혼용율이 증가할수록 사 강도는 증가하는 경향을 확인할 수 있었고, 스핀들 속도가 증가함에 따라서 불균제도 및 사결점이 다소 증가하였다. Core 방적사의 경우 Core에 p-Aramid를 사용했을 때 방적성과 피복성은 양호 하였지만, 강한 p-Aramid에 의해 톱 롤러코트의 마모가 되는 경향을 볼 수 있었다. 본 연구에서는 Ring 방적사/Core 방적사에 대해 좀더 구체적인 제조공정조건에 의한 물성 변화를 알아보았고, 좀더 다양한 섬유소재를 적용해서 제조하였다. Ring 방적사의 경우 p-Aramid 혼용율에 따른 실험을 하였는데, m-Aramid에 대한 p-Aramid의 혼용율을 0%, 5%, 10%, 20% 로 하여 Ne30을 제조하였으며, Core 방적사는 Core를 p-Aramid 200D로 하고 Sheath를 Cotton으로 하여 Core 공급속도비 (1.06, 1.10, 1.14), 연계수(T/M, 3.8, 4.0, 4.2), Sheath/Core 혼섬율(70/30, 60/40, 50/50)에 따라 제조하였다. 추가로 Core 방적사는 Sheath에 Cotton 대신 FR-Rayon과 선염 Cotton을 사용하여 각각 Sheath/Core 혼섬율 70/30의 비율로 방적사를 제조하여 다양한 소재에 따른 방적사의 물성을 측정하였다. 제조된 시험 원사들의 측정 물성은 번수(Ne), 균제도(U%), 사결점(IPI), 강력(cN), 신도(%), 비강도(cN/Tex) 등이며, 편직을 통해 편성물의 외관을 확인하였다. Ring 방적사의 경우 p-Aramid의 혼용율이 증가할수록 강도는 완만하게 증가한 반면, 신도는 급격하게 감소하였다. Cotton Core 방적사의 경우는 공급속도비가 높아질수록 균제도가 높아지는 것을 볼수 있었고, Core 공급속도비가 높아질수록 외관상 피복도는 높아진 것을 볼 수 있었다. 이렇게 연구된 Aramid 소재를 이용한 방적사 제조 공정조건변화에 따른 물성 및 피복도 결과는 기존 방적업체에서 Aramid를 이용한 방적사 제조시에 공정조건을 확보하는데 도움이 될 것이라 생각되며, 방적사 시제품 생산시에 발생할 수 있는 시행착오를 줄임으로써 시제품 제조를 위한 생산비용의 Loss를 절감할 수 있을 것으로 예상된다.

• Journal of Engineering Education Research
• /
• v.9 no.2
• /
• pp.34-51
• /
• 2006

In knowledge based society of 21c, engineers require not only their own speciality but also engineering basic competency such as creative thinking, the ability of working together, the ability of communication. Engineering colleges responsible for educating engineers consider developing curriculum including Engineering Basic Competency which is reflecting the needs of the times. By utilizing the accreditation programs of engineering education, UK-SPEC of UK Engineering Council, EA(Engineering Australia) standards/handbook of the Institute of Engineers Australia, O*NET of U.S. Occupational Network, this study generates core elements of engineering basic competency to prove the capability of engineering basic competency required to desired engineers. Core constituents derived from the study were categorized into 3 major areas of the basic engineering literacy in Humanities and Social Sciences(HSS), the ability of Creativity Engineering Design, Career development and each category and constituents were surveyed and checked by engineers in the field to deduce engineering basic competency that should be educated in the engineering college.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.372-378
• /
• 2005

Calcium Carbonate Saturation Index (LI: Langelier Index), an indicator of $CaCO_3(s)$ saturation, indicates corrosiveness of drinking water and it has been used to monitor drinking water conditions in USA, E.U, and Japan. The objective of this research was to measure LI parameters including water temperature, pH, total alkalinity, calcium ion concentration, and electric conductivity, and to evaluate possibility of using LI in domestic system. Results showed that water temperature varied from 2.0 to $26^{\circ}C$ during 15 months, indicating an average annual temperature of $23.9^{\circ}C$. Total alkalinity was from 20 to 45 mg/L. The concentration difference between total alkalinity and $HCO_3{^-}$ value was hardly observed; the concentration of total alkalinity can be replaced by that of $HCO_3{^-}$. Tap water had a medium corrosiveness since LI values were from 2.0 to 0.5. To reduce the corrosiveness and to increase LI values of drinking water, the results of this study showed that chemicals such as $Ca(OH)_2$, $CaCO_3$, NaOH, or $NaHCO_3$ should be added to water treatment plants.