• Progress in Medical Physics
• /
• v.18 no.2
• /
• pp.98-106
• /
• 2007

In June 2005, Yonsei University Medical Center, Severance Hospital upgraded a full-PACS system by adding twenty (5 mega pixels) Totoku ME511L flat panel LCD display devices for diagnostic interpretation purposes. Here we report upon the quantitative (or visual) acceptance testing of the twenty Totoku ME511L display devices for reflection, luminance response, luminance spatial dependency, resolution, noise, veiling glare, and display chromaticity based on AAPM TG 18 report. The tools used in the tests included a telescopic photometer, which was used as a colorimeter, illuminance meter, light sources for reflection assessment, light-blocking devices, and digital TG18 test patterns. For selected 8 flat panel displays, mean diffuse reflection coefficient ($R_d$) was $0.019{\pm}0.02sr^{-1}$. In the luminance response test, luminance ratio (LR), maximum luminance difference ($L_{max}$), and deviation of contrast response were $550{\pm}100,\;2.0{\pm}1.9%\;and\;5.8{\pm}1.8%$, respectively. In the luminance uniformity test, maximum luminance deviation was $14.3{\pm}5.5%$ for the 10% luminance of the TG18-UNL10 test pattern. In the resolution test with luminance measurement method, percent luminance (${\Dalta}L$) at the center was $0.94{\pm}0.64%$. In all cases of noise testing, rectangular target In every square in the three quadrants was visible and all 15 targets except the smallest one in the every corner pattern and the center pattern. The glare ratio (GR) was $12,346{\pm}1,995$. The color uniformity, (u',v'), was $0.0025{\pm}0.0008$. Also, the research results of qualify control guideline of primary disply devices suitable for domestic circumstance are presented All test results are in-line with the criteria recommended by AAPM TG18 report and are thus fully acceptable for diagnostic image interpretation. As a result, the acceptance testing schedule described provides not only an acceptance standard but also guidelines for quality control, optimized viewing conditions, and a means for determining the upgrading time of LCD display devices for diagnostic interpretation.

• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.569-581
• /
• 2012

The levee is the facility which is constructed along with river for the protection of landside and for passage of water when there is a flood. When the seepage is exposed to the atmosphere on the landside surface of levee, it may eventually lead to levee failure. The seepage water may be removed from the landside surface by a properly designed drainage system. The purpose of the study is to show seepage control effect of a pervious toe drain, and to compare two drainage methods of a pervious toe drain. One is the pervious toe drain suggested by U.S. Army Corps of Engineers (USACE) and the other is that suggested by Japan Institute of Construction Engineering (JICE). The levee model constructed has the following dimension: the base width is 2.6 m; the crest width is 0.4 m; the side slope 1 : 2. The water depth in the riverside is 0.5 m. The shape of the toe drain by USACE is triangular. The shape of the toe drain by JICE is rectangular. They were installed with the base length of 0.4 m. The levee model without the toe drain showed saturation surface on the land side in the experiment but not with the toe drain. The experiment results was applied to a numerical analysis model using SEEP/W to calibrate and verify. The numerical analysis results for 35 cm and 30 cm drain width showed that the drain by JICE is a little bit safer than the drain by USACE. It is also easier to construct the toe drain by JICE. The results in the study would be applied to plan the seepage control for a levee with pervious toe drain.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.67-73
• /
• 1979

The effect of liming on the potassium equilibrium activity ratio ($AR^k_e$) of Chinese cabbage cultivated soil and on the potassium uptake by the plant summarize as follows: 1. $AR^k_e$ is raised by the application of 1.6 ton of $Ca(OH)_2$ per hectare that required amount to adjust pH 6 for the soil. Generally, it could be confirmed that both liming and potassium placement to the soil show the combined effects to raise $AR^k_e$. 2. The exchangeable potassium and the electrical conductivity increase by liming. The mean value of the exchangeable potassium is 0.71 m. equ. per 100g of limed soils while the control give 0.64 m. equ. per 100g. For the electrical conductivity, limed soil show $766{\mu}mho$ and $750{\mu}mho$ is for the control. 3. The reason $AR^k_e$ value increase by liming could be considered that concentrations of $K^+$ and $Ca^{{+}{+}}+Mg^{{+}{+}}$ in the equilibrium solution are increased owing to release both K and $Ca^+$ Mg into the liquid from solid phase in the potassium equilibrium system of the soil. 4. For considering that the energies of exchange of calcium by potassium in the limed soils at different potassium treatment, that is without K, 200 kg $K_2O/ha$ and 350 kg $K_2O/ha$, give -3887 and -3778 and -3737 calories per chemical equivalent respectively. On the other hand in case of the controls which received the same amounts of potassium as mentioned above, energy values are -3983, -4392 and -4228 calories respectively. 5. The absorbed amount of potassium and weights of dry matters of the plant which grown in the limed soils show little higher values than the controls.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.125-133
• /
• 2007

Through open-sky policy, USA and European selected market principle of multiuser. However, in Asian case, major airlines monopolize airports. It is purpose that analyzes fare competition of Asian Hub Airport and the position of Incheon airport in Asia. Passengers required longer time and distance to go to the destination because direct flights decreases. But passengers increased in airport every year. Because of routes that decrease, airlines provide more services of flights. So airlines prefer to Hub Airports. As a result, both passengers and airlines are profitable by various routs and the increased frequency. On the assumption that distance and fare are related, the final formula is as following that defined the air fare from hub(H) to destination(Z) by logarithm. Analysis showed that log Rdist is not 1 but 0.08. As distance increases, fare doesn't increase. If distance from hub to destination airports is longer, Log dist_HZ is negative. It is that fare decreases from origin to destination via hub or that fare increases from hub to destination. HHI_HZ and HHI_AZ are negative. It means that if the degree of monopolization of hub and origin airports is lager, fare decreases from origin to destination via hub. Or fare increases from hub to destination. And it compares the Incheon airport with the other Asian hub airports and it examines the competitive fare by market division. As compared with the Incheon airport, Singapore, Beijing and Narita airports are higher fares. They compete with the other ones by Asian hub airports. But Hong Kong and Taipei airports must have more passengers through fare competition yet.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.21 no.2
• /
• pp.49-57
• /
• 2016

Even if an external forcing that will drive a climate change is given uniformly over the globe, the corresponding climate change and the feedbacks by the climate system differ by region. Thus the detection of global warming signal has been made on a regional scale as well as on a global average against the internal variabilities and other noises involved in the climate change. The purpose of this study is to estimate a timing of unprecedented climate due to global warming and to analyze the regional differences in the estimated results. For this purpose, unlike previous studies that used climate simulation data, we used an observational dataset to estimate a magnitude of internal variability and a future temperature change. We calculated a linear trend in surface temperature using a historical temperature record from 1880 to 2014 and a magnitude of internal variability as the largest temperature displacement from the linear trend. A timing of unprecedented climate was defined as the first year when a predicted minimum temperature exceeds the maximum temperature record in a historical data and remains as such since then. Presumed that the linear trend and the maximum displacement will be maintained in the future, an unprecedented climate over the land would come within 200 years from now in the western area of Africa, the low latitudes including India and the southern part of Arabian Peninsula in Eurasia, the high latitudes including Greenland and the mid-western part of Canada in North America, the low latitudes including Amazon in South America, the areas surrounding the Ross Sea in Antarctica, and parts of East Asia including Korean Peninsula. On the other hand, an unprecedented climate would come later after 400 years in the high latitudes of Eurasia including the northern Europe, the middle and southern parts of North America including the U.S.A. and Mexico. For the ocean, an unprecedented climate would come within 200 years over the Indian Ocean, the middle latitudes of the North Atlantic and the South Atlantic, parts of the Southern Ocean, the Antarctic Ross Sea, and parts of the Arctic Sea. In the meantime, an unprecedented climate would come even after thousands of years over some other regions of ocean including the eastern tropical Pacific and the North Pacific middle latitudes where an internal variability is large. In summary, spatial pattern in timing of unprecedented climate are different for each continent. For the ocean, it is highly affected by large internal variability except for the high-latitude regions with a significant warming trend. As such, a timing of an unprecedented climate would not be uniform over the globe but considerably different by region. Our results suggest that it is necessary to consider an internal variability as well as a regional warming rate when planning a climate change mitigation and adaption policy.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.2
• /
• pp.72-78
• /
• 2009

The demand for rainfall data in gridded digital formats has increased in recent years due to the close linkage between hydrological models and decision support systems using the geographic information system. One of the most widely used tools for digital rainfall mapping is the PRISM (parameter-elevation regressions on independent slopes model) which uses point data (rain gauge stations), a digital elevation model (DEM), and other spatial datasets to generate repeatable estimates of monthly and annual precipitation. In the PRISM, rain gauge stations are assigned with weights that account for other climatically important factors besides elevation, and aspects and the topographic exposure are simulated by dividing the terrain into topographic facets. The size of facet or grid cell resolution is determined by the density of rain gauge stations and a $5{\times}5km$ grid cell is considered as the lowest limit under the situation in Korea. The PRISM algorithms using a 270m DEM for South Korea were implemented in a script language environment (Python) and relevant weights for each 270m grid cell were derived from the monthly data from 432 official rain gauge stations. Weighted monthly precipitation data from at least 5 nearby stations for each grid cell were regressed to the elevation and the selected linear regression equations with the 270m DEM were used to generate a digital precipitation map of South Korea at 270m resolution. Among 1.25 million grid cells, precipitation estimates at 166 cells, where the measurements were made by the Korea Water Corporation rain gauge network, were extracted and the monthly estimation errors were evaluated. An average of 10% reduction in the root mean square error (RMSE) was found for any months with more than 100mm monthly precipitation compared to the RMSE associated with the original 5km PRISM estimates. This modified PRISM may be used for rainfall mapping in rainy season (May to September) at much higher spatial resolution than the original PRISM without losing the data accuracy.

• Journal of Hospice and Palliative Care
• /
• v.13 no.3
• /
• pp.153-160
• /
• 2010

Purpose: The purpose of the present study was to investigate needs and satisfaction on the medical services of cancer patients in Jeju Special Self-Governing Province. Methods: Total 174 cancer patients, who visited at the clinic of Jeju National University Hospital, submitted informed consent and participated in this study from July 13 to July 30, 2009. Self questionnaire was used and data were analyzed with Kolmogorov-Smirnov test, Mann-Whitney U test, ANOVA, and Kruskal-Wallis test. Results: Participants expressed the needs of most economical support (3.38 out of 4), followed by counseling of treatment plan (3.22), information of disease (3.07), and disease management except cancer (2.97). Participants were satisfied most with religious counseling (3.41), followed by nursing service support (3.39), employment counseling (3.26), and counseling for family or interpersonal relationships (3.26). The satisfaction of economical support was the lowest (1.98). Satisfaction of men was higher than women, and needs in patients who were living with children was the highest. Patients who were living alone or with children showed the lowest satisfaction about the medical services. There were no significant differences in the general characteristics, however, participants who were older than 60 years of age or had higher income showed lower needs and higher satisfaction. There were no significant differences in the medical characteristics, however, thyroid cancer patients and patients who were treated with radiation therapy or transarterial embolization showed low satisfaction. Conclusion: Cancer patients seemed to need more economical support, information of treatment or disease, and symptom management. Furthermore, there were various needs about the services, depending on family formation or economical support of patients. Therefore, it is certain that patients who were suffering from other cancers, except the 5 major cancers, needed more services. In conclusion, continuous and systemic policy to consider patient's characteristics and needs are needed in community as well as health care system.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.142-149
• /
• 2002

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite［AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2％ methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p＜0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R＞A =H=M＞D＞Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p＜0.05).

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.409-417
• /
• 2001

The purpose of this study was to investigate the influence of light irradiation over self-priming adhesive on dentin bonding. After acid etching the exposed dentin, a self-priming adhesive (Prime&Bond$^{\circledR}$NT dental adhesive system Dentsply DeTrey, GmbH, Konstanz, Germany) was applied and light irradiation was done for 20 sec with regular intensity (600 mW/$\textrm{cm}^2$) in group I and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in group III. No light irradiation was done over self-priming adhesive in groups II and IV. Composite resin was added on the self-priming adhesive and irradiated for 40 sec with regular intensity (600 mW/$\textrm{cm}^2$) in groups I and II and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in groups III and IV. To see the effect of light curing time on dentin bonding, another 3 group specimens were prepared. Without light-irradiation over self-priming adhesive, added composite resin was irradiated for 3, 6, or 12 sec with ultra-high intensity light. After bonded specimens were stored in 37$^{\circ}C$ distilled water for 24 hours, shear bond strength were measured using a universal testing machine (4202, Instron, Instron Co., U.S.A.) and fractured surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan). Statistical analysis were done with one-way, two-way ANOVA and chi-square test. The results were as follows : 1. The shear bond strengths from the groups irradiated over self-priming adhesive were significantly higher than those from the groups without irradiation (p<0.05). 2. There was no significant shear bond strength difference between regular intensity light irradiation groups and ultra-high intensity ones (p>0.05). 3. There was no significant shear bond strength difference among various irradiation time groups with ultra-high intensity ones (p>0.05). 4. In stereomicroscopic examination of fractured surfaces, adhesive-cohesive mixed failure mode was mostly seen in all groups, and there was no significant difference in failure mode among groups (p>0.05).

• Korean Journal of Microbiology
• /
• v.41 no.1
• /
• pp.38-46
• /
• 2005

To determine the actual hygienic status of domestic chicken meats sold in public markets (conventional markets and department stores), microbial contamination levels (Total cells, Coliforms and Staphylococcal cells) and zoonotic pathogens (Salmonella species, Campylobacter species, Listeria species, and Staphylococcus aureus) isolation tests were conducted. Chicken meats and eggs tested were collected from the conventional markets (Si-Jang) and department-stores located in Seoul and Kyung-gi regions in 1996. In total cells and coliforms contamination tests, chicken meats sold in department stores were much lesser contamination status than those of Si-Jang, but staphylococcal cells level was much more higher than that of conventional markets. Salmonella isolation frequency was investigated as $68.8\%$, but Campylobacter jejuni and Listeria monocytogenes isolation frequency were appeared both $64.0\%\;and\;63.3\%$. In case of eggs sold in public markets, one of S. gallinarum strain $(0.7\%)$ was isolated only on the egg-shell part among the four-hundred and fourty-six. In comparison with foreign imported chicken meats, there were no big differences in microbial contamination status. On the other hand, both Salmonella and L. monocytogenes were isolated only in the chicken wings from Korea and China, but not from U.S.A. This data suggest that more hygienic control system in order to produce the safe and hygienic chicken meats and eggs is need in our country as soon as possible.