• ETRI Journal
• /
• v.28 no.2
• /
• pp.216-218
• /
• 2006

This letter presents the design for a low-profile planar inverted-F antenna (PIFA) that can be stuck to metallic objects to create a passive radio frequency identification (RFID) tag in the UHF band. The designed PIFA, which uses a dielectric substrate for the antenna, consists of a U-slot patch for size reduction, several shorting pins, and a coplanar waveguide feeding structure to easily integrate with an RFID chip. The impedance bandwidth and maximum gain of the tag antenna are about 0.3% at 914 MHz for a voltage standing wave ratio (VSWR) of less than 2 and 3.6 dBi, respectively. The maximum read range is about 4.5 m as long as the tag antenna is on a metallic object.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.224-226
• /
• 2003

Design of a GA-based SPS controller for Power system stabilization has been investigated in this paper. The design problem of SPS controller is formulated as an optimization problem using GA. The dynamic characteristic responses are considered to verify performance of the proposed SPS under various disturbance for various operation conditions. The simulation results show that the proposed SPS controller provides most of the damping and improves greatly the voltage profile of the system under two different disturbances.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.6
• /
• pp.427-431
• /
• 2017

Anodic aluminum oxide (AAO) film has recently attracted much attention as a key material for the fabrication of various nanostructures. A control of anodizing voltage (U) was employed to render different anodic aluminum oxide (AAO) nanostructures with pore diameter ($D_p$) and interpore distance ($D_{int}$) in oxalic acid. In this work, we study the effect of stepwise modulation of anodizing voltages on the shape and dimension of porous structures along the vertical direction and demonstrate the fabrication of hierarchical layers of systematically controlled three-dimensional (3D) pore profile.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.1-4
• /
• 2001

SRM(Switched Reluctance Motor) uses reluctance torque by pulse excitation control. SRM drives are much studied in electrical vehicles and industrial application due to the simple, robust mechanical structure and high speed characteristics. For the high performance control of SRM, it is necessary to synchronize the stator phase excitation with the rotor position. This paper proposes a new encoder for high performance excitation control of SRM. The proposed encoder has complex structures of incremental and absolute encoder. An each phase inductance profile can be synchronized with 4-bit absolute position signal and incremental pulses are used for speed detection. Low cost and simple manufacturing of SRM encoder is possible.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1024-1026
• /
• 2003

The purpose of establishing GPS networks of continuously operating reference stations (CORS) is aimed to assist land surveying or crustal deformation in the early stage. However, with a fast evolving and improving path the GPS technique has been extended to accurately measure atmospheric precip itable water vapor as a core objective of many projects developed in many countries and regions such as the SuomiNet (U.S., UNAVCO), COST716 (European, COST), GEONET (Japan, GSI), ...etc. In this paper, we present the current progress of the being-set-up GPS network in Taiwan whose atmospheric profile observations mainly count on the traditional radiosonde soundings as typically seen in any other part of the world. The GPS data collected from the Taiwan dense GPS network primarily supported by Central Weather Bureau are processed using the Bernese software version 4.2. Precipitable water vapor is then derived with the auxiliary surface meteorological measurements. Time series of precipitable water are examined and analyzed. A focus on the extreme weather cases is shown as an example.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.589-590
• /
• 2003

Mesiobuccal or distobuccal canals of maxillary molars and mesiobuccal or mesiolingual canals of mandibular malars were selected. Forty specimens were divided into four groups according to the instruments used : stainless steel K-files($MANI^{\circledR}$, Matsutani Seisakusho Co. Takanezawa, Japan), nickel-titanium K-files (Naviflex $NT^{TM}$, Brassler, Savannah, U.S.A.), $Profile^{\circledR}$, and $ProTaper^{TM}$ (Dentsply-Maillefer, Ballaigues, Switzerland). Occlusal surface of each tooth and root apex were flattened by using diamond burs and sandpaper. Before instrumentation, a rubber stop was fixed with glue to the ＃10 K-files of initial working length in each tooth.(omitted)

• Journal of information and communication convergence engineering
• /
• v.22 no.1
• /
• pp.7-13
• /
• 2024

User preferences and ratings may be anticipated by recommendation systems, which are widely used in social networking, online shopping, healthcare, and even energy efficiency. Constructing trustworthy recommender systems for various applications, requires the analysis and mining of vast quantities of user data, including demographics. This study focuses on holding elections with vague voter and candidate preferences. Collaborative user ratings are used by filtering algorithms to provide suggestions. To avoid information overload, consumers are directed towards items that they are more likely to prefer based on the profile data used by recommender systems. Better interactions between governments, residents, and businesses may result from studies on recommender systems that facilitate the use of e-government services. To broaden people's access to the democratic process, the concept of "e-democracy" applies new media technologies. This study provides a framework for an electronic voting advisory system that uses machine learning.

• Animal Bioscience
• /
• v.35 no.12
• /
• pp.1911-1920
• /
• 2022

Objective: This study was performed to determine the apparent metabolizable energy (AME_n) content of tannin-free red/bronze, white/tan and U.S. No. 2 varieties of grain sorghum for feeding Japanese quail and validate their nutrient profile by evaluating effects on performance and carcass traits with full-substitution of corn. Methods: Experiment 1 determined the AME_n content of red/bronze, white/tan, and U.S. No. 2 grain sorghum varieties fed to mixed-sex Japanese quail (Coturnix japonica) (n = 314) at 3 and 6-weeks of age. Analyses were based on a 2×4 factorial treatment design with age and grain types defining the treatments, and a randomized complete block experiment design with cage and trials defining the block. AME_n values were validated by evaluating the performance and carcass traits of Japanese quail (n = 644) from 1 to 40 days of age in Experiment 2 with birds were fed 1 of 4 complete diets. Statistical analyses were conducted on performance data and select individual carcass trait measurements. Results: Determined AME_n values at 3-weeks of age were 3,524±122.03 (red/bronze), 3,252±122.03 (white/tan), and 3,039±123.44 (U.S. No. 2) kcal/kg. At 6-weeks of age, determined AME_n were 3,373±297.35 (red/bronze), 3,279±297.35 (white/tan), and 2,966±298.64 (U.S. No. 2) kcal/kg. Carcass traits showed live body weight (p = 0.0409) and hot carcass weight (p = 0.0234) were greatest in U.S. No. 2; however, carcass yield (p<0.0001) was lowest. No significant differences were observed among treatments for feed intake, feed conversion ratio, breast weight and breast yield (p>0.05). Conclusion: These studies demonstrated that tannin-free grain sorghum varieties may be a potential alternative to corn in quail diets while maintaining growth performance and carcass parameters.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.3
• /
• pp.23-32
• /
• 2005

A change of z-directional structural and surface properties by calendering has a great influence on liquid penetration into a sheet. It could be also important for multi-ply sheet because it contacts liquid dunhg coating or converting process. Therefore, this study was aimed to evaluate of a change of z-directional structure in multi-ply sheet by calendering. To do this, multi-ply sheets were prepared with various raw materials and calendered at the different pressure and temperature conditions. In multi-ply sheet which consisted of one kind of pulp fiber, thickness reductions were higher in top and bottom plies than in middle plies. And in the case of soft nip calender treatment with high temperature, top layer which was in contact with heating roll showed the highest reduction of thickness. Hard nip calender treatment showed U-shaped density profile in z-direction, but compression profile by SNC treatment was dependent on calendering condition. To examine z-directional structure of multi-ply sheet which was composed of different raw material for each layer, CLSM (Confocal Laser Scanning Microscopy) analyses were carried out on cross direction of sheet. It turned out to be a useful tool for investigating z-directional analysis. As a result, variation of thickness reduction in z-direction is dependent on ply structure, compressibility of pulp fiber, and calendering condition.

• Journal of Environmental Science International
• /
• v.13 no.3
• /
• pp.245-250
• /
• 2004

The SBR(Sequencing Batch Reactor) process is ideally suited to treat high loading wastewater due to its high dilution rate. SBR operates by a cycle of periods consisting of filling, reacting, settling, decanting and idling. The react phases such as aeration or non-aeration, organic oxidation, nitrification, denitrification and other bio-logical reactions can be achieved in a reactor. Although the whole reactions can be achieved in a SBR with time distributing, it is hard to manage the SBR as a normal condition without recognizing a present state. The present state can be observed with nutrient sensors such as ${NH_{4}}^{+}-N$, ${NO_{2}}^{-}-N$, ${NO_{3}}^{-}-N} and ${PO_{4}}^{ 3-}-P.$ However, there is still a disadvantage to use the nutrient sensors because of their high expense and inconvenience to manage. Therefore, it is very useful to use common on-line sensors such as DO, ORP and pH, which are less expensive and more convient. Moreover, the present states and unexpected changes of SBR might be predicted by using of them. This study was conducted to get basic materials for making an inference of SBR process from ORP(oxidation reduction potential) of synthetic wastewater. The profiles of ORP, DO, and pH were under normal nitrification and denitrification were obtained to compare abnormal condition. And also, nitrite and nitrate accumulation were investigated during reaction of SBR. The bending point on ORP profile was not entirely in the low COD/NOx ratio condition. In this case, NOx was not entirely removed, and minimum ORP value was presented over -300mV. Under suitable COD/NOx ratio which complete denitrification was achieved, ORP bending point was observed and minimum ORP value was under -300m V. Under high COD/NOx ratio, ORP bending point was not detected at the first subcycle because of the fast denitrification and minimum ORP value was under -300mV at the time.