• Restorative Dentistry and Endodontics
• /
• 제36권1호
• /
• pp.59-65
• /
• 2011

연구목적: 본 연구의 목적은 서로 다른 기하학적 형태를 가진 3가지 Ni-Ti 파일, 즉 K3, NRT, Profle을 사용하여 레진 블록으로 제작된 만곡 근관에서의 apical transportation 양상 및 working length 변화를 서로 비교하는 것이다. 연구 재료 및 방법: 실험 방법은 30개의 레진 블록을 Schneider technque을 사용하여 만곡도 측정 후 각 group당 임의로 10개씩 배분하였다. 이를 각 Ni-Ti 파일을 사용하여 crown down technique으로 근관 성형하였다. 이의 분석을 위해 double radiograph superimposition method (Backman CA 1992)를 사용하고, 분석의 정확성과 일관성을 위해 특별히 고안된 jig, digital X-ray 및 apical transportation의 측정 시 CAD/CAM software를 이용하였다. Apical transportation 양은 '근단공-0.5 mm'부위로부터 0, 1, 3, 5 mm에서 측정 하였으며, working length 변화는 근관 성형 전후의 working length 변화를 측정하였다. 또 통계 처리는 각 group의 apical transportation 양과 working length 변화를 Kruskal-Wallis One Way Analysis로 분석 후 다중 비교는 Mann-Whitney U-test를 사용하였다. 결과: 각 group간 working lengh 변화 및 0, 1, 3 mm 부위에서의 apical transportation 측정 값 사이에는 유의할만한 차이가 관찰되지 않았으나(p = 0.924), 5 mm 부위에서는 K3와 Profile사이에 유의할 만한 차이가 있었다(p = 0.027). 결론: 서로 다른 기하학적인 형태를 가진 3가지 Ni-Ti 파일의 apical transportation 및 working length 변화 정도 평가시, 본 연구의 범위 내에서는 3가지 파일 모두 유의할 만한 차이를 보이지 않은 가운데 본래의 근관 형태를 잘 유지한다고 할 수 있다.

• Clinical and Experimental Pediatrics
• /
• 제59권10호
• /
• pp.402-407
• /
• 2016

Purpose: Buckwheat allergy is one of the most severe types of food allergy in some countries, especially among children. However, few studies have investigated this condition. The aim of this study was to report the clinical and laboratory findings in Korean children with buckwheat allergy. Methods: Thirty-seven subjects, aged 1 to 14 years, were enrolled by retrospective medical record review from January 2000 through May 2015 at the Department of Pediatrics in Ajou University Hospital. The demographic profile, previous exposure to buckwheat pillows, clinical symptoms, and laboratory findings of each subject were recorded. Results: Twenty-six of the 37 children had immediate-type allergic symptoms to buckwheat, while 11 subjects were tolerant to buckwheat. Seventeen out of 26 buckwheat allergic children (65.4%) had anaphylaxis. The median buckwheat specific IgE level in the buckwheat allergic group ($7.71kU_A/L$) was significantly higher (P<0.001) than in the buckwheat tolerant group ($0.08kU_A/L$) with an optimal cutoff value of $1.27kU_A/L$ (sensitivity 84.6%, specificity 100%). When adjusted for age, the difference between the 2 groups showed no statistical significance (P=0.063). In subjects who had anaphylaxis, buckwheat-specific IgE levels ranged from 0.37 to $100kU_A/L$. Conclusion: Almost two-thirds of buckwheat-allergic children had anaphylaxis, and a wide-range of buckwheat specific IgE levels were observed in these children. Anaphylaxis occurred in a subject with a remarkably low IgE level ($0.37kU_A/L$).

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제14권9호
• /
• pp.916-920
• /
• 2008

개인 컴퓨팅 환경은 사용자에 특화된 응용프로그램 및 설정, 사용자 데이타 등을 총칭하는 개념으로써, 노트북, UMPC 등의 휴대용 컴퓨팅 H/W는, 어떤 곳에서도 항상 개인에게 특화된 컴퓨팅 환경에서 작업 가능하도록 소형화, 경량화가 진행되고 있다. 그러나, 최근 가상화 기술 및 휴대용 스토리지 기술을 이용한 다양한 개인 컴퓨팅 환경 이동성 지원 기술이(c.f. VMWare Pocket ACE[1], Mojopac[2], u-PC[3] 등) 등장함으로써, 공용 PC 상에 자신의 컴퓨팅 환경을 로딩하여 사용할 수 있도록 지원하는 기술이 주목받고 있다. 특히, 본 논문의 이전 연구로써, u-PC[3]에서는 UPnP 및 iSCSI 프로토콜을 이용하여 사용자 영역 네트워크(PAN)상에서 자동 검색 및 구성이 가능한 무선 스토리지 기술과, Windows 운영체제 상에서 구동 가능한 개인 컴퓨팅 환경 이동성지원 기술을 제안하였다. 그러나, 기존의 u-PC 기술에서는, Windows 운영체제 상 Filter Driver 계층에서 IRP(I/O Request Packet) forwarding을 이용하여 개인 컴퓨팅 환경의 이동성 지원 기술을 구현함으로써, 제한적인 응용 프로그램만 구동 가능한 한계점이 있었다. 본 논문에서는 Windows 운영체제 상 System Call Hooking 기법을 이용하여 운영체제 가상화 기술을 구현하고, 개인 컴퓨팅 환경의 이동성을 지원함으로써, 기존 논문에서의 한계성을 극복하였으며, VMWare Pocket ACE, Mojopac 등의 단점인 개인 컴퓨팅 환경의 구동 초기화 오버 헤드를 극복하였다. 또한, Ultra Wide Band (UWB) 기반 고속 무선 네트워크 상 적용 가능한 무선스토리지 기술을 개발하고, 개선된 u-PC 플랫폼을 연동하여 다양한 형태의 개인 컴퓨팅 환경 사용 모델을 제시함으로써 기술의 적용성을 검증하였다.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1077-1087
• /
• 2002

The heat (mass) transfer characteristics on the blade surface of a high-turning first-stage turbine rotor for power generation has been investigated by employing the naphthalene sublimation technique. A four-axis profile measurement system is developed successfully for the measurements of local sublimation depth on the curved surface In the leading edge region, there is a good agreement between the present heat (mass) transfer data and the previous result on a turbine blade with a moderate turning angle, but some discrepancies are found in the mid-chord heat (mass) transfer between the two results. The local heat (mass) transfer on the present suction surface is greatly enhanced due to an earlier boundary transition, compared with that on a turbine blade with a moderate turning angle, meanwhile there is only a slight change in the pressure-side heat (mass) transfer between the two different turbine rotors. In general, the heat (mass) transfer augmentation by the endwall vortices is found much higher on the suction surface than on the pressure surface.

• 대한기계학회논문집A
• /
• 제20권6호
• /
• pp.1743-1752
• /
• 1996

In this paper, a precision inspection technique using CAD/CAI integration is proposed for the parts having very thin and sharp 3 dimensional curve features. The technique begings with feature reconstruction of turbine blades which have 3 dimensional combined feometry, such as splines, and thin circles. The alifnment procedures consistsb of two phases-rough and fine phases : rough phase alignment is based on the conventional 6 point5s probing on the clear cut surfacef, and fine phase alignment is based on the intial measurement on the 3 dimensional curved parts using an lterative measurement feed-back least sequares technique for alignment. Forf the analysis of profile tolerance of parts, the actual measured points are obtained by finding the closet points on the CAD geometry by the developed subdivision technique and the Tschebycheff norm is applied based on iterative fashion, giving accurate profile tolerance value. The developed inspection technique is applied to practical procedures of blade manufacturing and demonstrated high performance.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.972-981
• /
• 2000

The phased array transducer has two distinct advantages. One is rapid scanning comparing with the conventional mechanical or manual scanning system. Therefore, output image is represented in real-time. The other is the dynamic focusing and the dynamic steering of ultrasonic beam. Only the delay times that are controlled electrically are used to focus and to steer beam without any lenses or wedges. In this study, the profile of the ultrasonic beam for the phased array transducer has been simulated in the Huygens principle with varying the inter-element spacing of the linear phased array transducer. From the result of this study, it was found that the ultrasonic beam spread wider as the inter-element spacing was decreased. However, the focusing effect was improved, even when the number of the element was not big. In addition, there was grating lobes that are constructed when the inter-element spacing is more than half wavelength. However, this grating lobe has lower amplitude than the main lobe.

• 한국지반공학회지:지반
• /
• 제13권3호
• /
• pp.53-62
• /
• 1997

주파수영역 표면파기법 (SASW)을 수중지반탐사에 적용하기 위한 일련의 해석적 연구가 실시되었다. SASW실험으로 지반강도분포를 정밀히 예측하기 위해서는 실험조건, 고차모드의 영향, 응답파의 정리 기법 등, 실험결과에 영향을 미치는 모든 제반 요소들을 고려한 정확하고도 경제적인 이론분산곡선을 결정해야만 한다. 따라서, 본 논문에서는 수중 표면파의 이론분산곡선을 구하기 위한 해석기법들을 개발하고 그 이론적 배경을 설명하였다. 또한, 개발된 해석기법들을 수중지반에서 실제로 실시된 SASW실험결과의 분석에 적용하여 수중지반의 강도특성을 예측하는 예를 보였다. 이 결과로부터 개발된 해석기법들과 더불어서 수중지반탐사를 위한 SASW 실험방법의 적용성이 검토되었다.

• Mycobiology
• /
• 제39권1호
• /
• pp.45-51
• /
• 2011

This work was conducted to investigate dietary supplementation of oyster mushroom fruiting bodies on biochemical and histological changes in hyper and normocholesterolemic rats. Six-week old female Sprague-Dawley albino rats were divided into three groups of 10 rats each. Feeding a diet containing a 5% powder of Pleurotus ostreatus fruiting bodies to hypercholesterolemic rats reduced plasma total cholesterol, triglyceride, low-density lipoprotein (LDL), total lipid, phospholipids, and LDL/high-density lipoprotein ratio by 30.18, 52.75, 59.62, 34.15, 23.89, and 50%, respectively. Feeding oyster mushrooms also significantly reduced body weight in hypercholesterolemic rats. However, it had no adverse effects on plasma albumin, total bilirubin, direct bilirubin, creatinin, blood urea nitrogen, uric acid, glucose, total protein, calcium, sodium, potassium, chloride, inorganic phosphate, magnesium, or enzyme profiles. Feeding mushroom increased total lipid and cholesterol excretion in feces. The plasma lipoprotein fraction, separated by agarose gel electrophoresis, indicated that P. ostreatus significantly reduced plasma ${\beta}$ and pre-${\beta}$-lipoprotein but increased ${\alpha}$-lipoprotein. A histological study of hepatic cells by conventional hematoxylin-eosin and oil red O staining revealed normal findings for mushroom-fed hypercholesterolemic rats. These results suggest that a 5% P. ostreatus diet supplement provided health benefits by acting on the atherogenic lipid profile in hypercholesterolemic rats.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.709-713
• /
• 2004

Characteristics of laser-assisted wet etching of titanium in phosphoric acid were investigated to examine the feasibility of this method for fabrication of high aspect ratio microchannels. Laser power, number of scans, etchant concentration, position of beam waist and scanning speed were taken into consideration as the major process parameters exerting the temperature distribution and the cross sectional profile of etched channels. Experimental results indicated that laser power influences on both etch width and depth while number of scans and scanning speed mainly affect on the etch depth. At a low etchant concentration, the cross sectional profile of an etched channel becomes a U-shape but it gradually turns into a V-shape as the concentration increases. On the other hand, surface of the laser beam focus with respect to the sample surface is found to be a key factor determining the bubble dynamics and thus the process stability. It is demonstrated that metallic microchannels with different cross sectional profiles can be fabricated by properly controlling the process parameters. Microchannels of aspect ratio up to 8 with the width and depth ranges of 8∼32 m and 50∼300 m, respectively, were fabricated.

• 한국통신학회논문지
• /
• 제16권11호
• /
• pp.1027-1036
• /
• 1991

본 연구는ODIF(Open Document Interchanhe Format) elzhej(Decoder) 및 포스트스크립트(PostScript)변환기를 설계하였다. ASN.1 표기법을 적용하여 기술한 IS 8613에 기초한 ODIF 데이타스트림은 이를 하드카피등의 처리를 위해 적합한 내부구조로 디코드해야 한다. 또한 LBP를 이용한 고품질의 문서로 출력하기 위하여 문서의 내부구조를 포스트스크립트로 변화하는 포스트크립트 변환기를 제안하였다. 이들을 실현하기 위하여 많은 DA(Document Architecture), DAP(Document Application Profile)중에서 PDA(Processable DA) 및 Core 26(DAP 레벨 2)을 연구 대상으로 하였고 ICL(U.K)의 ODIF 데이터스트림으로 시스템의 실행을 확인하였다.