• International Journal of Control, Automation, and Systems
• /
• v.5 no.1
• /
• pp.43-50
• /
• 2007

Reheating furnace is an essential facility of a rod mill plant where a billet is heated to the required rolling temperature so that it can be milled to produce wire. Although it is very important to obtain information on billet temperatures, it is not feasible during furnace operation. Consequently, a billet temperature profile should be estimated. Moreover, this estimation should be done within an appropriate time interval for an on-line application. In this paper, a billet heat transfer model based on 2D FEM(Finite Element Method) with spatially distributed emission factors is proposed for an on-line billet temperature estimation and also a measurement is carried out for two extremely different furnace operation patterns. Finally, the difference between the model outputs and the measurements is minimized by using a new optimization algorithm named uDEAS(Univariate Dynamic Encoding Algorithm for Searches) with multi-step tuning strategy. The obtained emission factors are applied to a simulation for the data which are not used in the model tuning for validation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.604-604
• /
• 2012

기존의 실리콘 이종접합 태양전지는 후면에도 passivation layer인 i-a-Si:H 및 BSF층인 n-a-Si:H가 형성되는 구조를 가지고 있었다. 이러한 구조를 대체하기 위하여 본 연구에서는 실리콘 이종접합 태양전지의 후면 구조에 passivation 층 및 BSF층을 novel material인 Sb증착 및 RTP, laser anneal을 통해 새로운 BSF층 형성하고 태양전지 특성에 대해서 분석하였다. 이를 위해서 carrier lifetime, LIV, DIV 및 QE 등 전기적, 광학적 분석뿐만 아니라 SIMS 분석을 통하여 laser annealing 공정으로 형성된 BSF층의 depth profile 분석도 진행하였다. 또한 wafer orientation에 따른 특성을 분석하기 위하여 (100) 및 (111) wafer를 이용하여 분석하였다.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.3
• /
• pp.171-181
• /
• 2007

Ubiquitous computing is a vision of our future computing lifestyle in which computer systems seamlessly integrate into our everyday lives, providing services and information in anywhere and anytime fashion. Augmented reality (AR) can naturally complement ubiquitous computing by providing an intuitive and collaborative visualization and simulation interface to a three-dimensional information space embedded within physical reality. This paper presents a service framework and its applications for providing context-aware u-car maintenance services using augmented reality, which can support a rich set of ubiquitous services and collaboration. It realizes bi-augmentation between physical and virtual spaces using augmented reality. It also offers a context processing module to acquire, interpret and disseminate context information. In particular, the context processing module considers user's preferences and security profile for providing private and customer-oriented services. The prototype system has been implemented to support 3D animation, TTS (Text-to-Speech), augmented manual, annotation, and pre- and post-augmentation services in ubiquitous car service environments.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.2
• /
• pp.132-139
• /
• 1993

TCM has been used for many environmental impact assessments and many case studies in Korea. TCM was applied to urbvan areas and rolling terrains. But original TCM was developed for rural area, and this model could not reflect the characteristcs of these study sites. This paper analyzed the characteristics of TCM, and modified the algorithm of area source, and modified the vertical wind speed profile exponents and diffusion parameter to make it applicable in urban area. In the process of modification, an important error in area source calculation of original TCM program was found. So that was corrected as follows. $$ Before modification $QC = 0.79788456^*(0.5^*GRID)^**BA/(U(IA, IRUN)^*AA^*BA TCM09310$ After modification $QC = 0.79788456^*(500^*GRID)^**BA/(U(IA, IRUN)^*AA*BA) modified$ $$ Then original TCM and modified TCM-urban mode were compared, and it was found that predicted mean value by original TCM was 7 times higher than observed mean value. But mean value by modified TCM-urban mode was very similar to observed value.

• Journal of Information Technology Services
• /
• v.2 no.2
• /
• pp.1-14
• /
• 2003

In this study, we report the summary characteristics of CEOs of SI firms in Korea. In the first part of our paper, age, educational background, and career of CEOs in SI firms are analyzed according to CEO types (owners versus professional managers). In the second part, CEO tenures of Si firms in Korea are compared with those in the U.S. and Japan. We found that CEO tenures of SI firms in Korea are remarkably shorter than those in the U.S. and Japan. In conclusion, we contend that CEO systems in Korean firms should be improved to guarantee the longer tenures especially for professional managers.

• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.440-448
• /
• 2003

Sheet or plate bending is one of the most important industrial metal forming processes. Considerable attention has been focused on gaining a better understanding of bending characteristics. One of defaults in bending process is the springback. In this study, the springback characteristics of tailor-welded strips in U-bending process was investigated. Furthermore, effect of the process variables such as the geometry of the tools, thickness combination of workpiece, and welding prcoessing on springback were experimentally clarified. First, tailor-welded strips are joined by the laser welding process and consisted of two types of thickness combinations of the SCPl sheet, $0.8t{\times}1.2t$ and $0.8t{\times}1.6t$ to investigate the effect of different thickness combination on the springback. Secondly, two different directionly welded strips, one was welded along the centerline of the strip-width and the other was along the centerline of strip-length, were adopted to compare the effects of the location of weld line on the springback. Some cases of the experimental results were compared to the results simulated by using a commercial FEM code, PAM-STAMP and the theoretical results using the springback formula as well.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.35-40
• /
• 1995

Considering the higher discharge burnup, lower channel refuelling rate, lower linear element rating(LER), lower coolant void reactivity and axial power shape, CANFLEX-RU fuel bundle is optimized for CANDU-6 by grading the fissile composition in the ring-wise of the bundle and by applying fuel management scheme appropriately. The fissile composition of the fuel bundle is graded as the recovered uranium (0.9 w/o U-235) in the outer and intermediate elements, depleted Uranium (0.2 w/o U-235) in the center element, natural uranium (0.71 w/o U-235) in the inner elements. Enrichment is not required for these fuel. The fissile composition is optimized by lattice calculation and by time-averaged reactor simulation. CANFLEX-RU optimized for CANDU-6 resulted to be the 15% lower channel refuelling rate, acceptable axial power profile and power envelope, 70% higher discharge burnup, 15% lower LER and not increase coolant void reactivity compared with the 37-element natural uranium bundle for CANDU-6.

• Wind and Structures
• /
• v.3 no.3
• /
• pp.143-158
• /
• 2000

This report presents the findings of a one-year monitoring effort to empirically characterize and evaluate the nature of near-ground winds for structural engineering purposes. The current wind engineering practice in the United States does not explicitly consider certain important near-ground wind characteristics in typical rough terrain conditions and the possible effect on efficient design of low-rise structures, such as homes and other light-frame buildings that comprise most of the building population. Therefore, near ground wind data was collected for the purpose of comparing actual near-ground wind characteristics to the current U.S. wind engineering practice. The study provides data depicting variability of wind speeds, wind velocity profiles for a major thunderstorm event and a northeaster, and the influence of thunderstorms on annual extreme wind speeds at various heights above ground in a typical rough environment. Data showing the decrease in the power law exponent with increasing wind speed is also presented. It is demonstrated that near-ground wind speeds (i.e., less than 10 m above ground) are likely to be over-estimated in the current design practice by as much as 20 percent which may result in wind load over-estimate of about 50% for low-rise buildings in typical rough terrain. The importance of thunderstorm wind profiles on determination of design wind speeds and building loads (particularly for buildings substantially taller than 10 m) is also discussed. Recommendations are given for possible improvements to the current design practice in the United States with respect to low-rise buildings in rough terrain and for the need to study the impact of thunderstorm gust profile shapes on extreme value wind speed estimates and building loads.

• Journal of Intelligence and Information Systems
• /
• v.10 no.3
• /
• pp.1-10
• /
• 2004

In this paper, a new character segmentation algorithm of machine printed character recognition is proposed. The new approach of the proposed character segmentation algorithm overcomes the weak points of both feature-based approaches and recognition-based approaches in character segmentation. This paper defines side profiles of touching characters. The character segmentation algorithm gives a candidate single character in touching characters by side profiles, without any help of character recognizer. It segments touching characters and decides the candidate single character by side profiles. This paper also defines cutting cost, which makes the proposed character segmentation find an optimal segmenting path. The performance of the proposed character segmentation algorithm in this paper has been obtained using a real envelope reader system, which can recognize addresses in U.S. mail pieces and sort the mail pieces. 3359 mail pieces were tested. The improvement was from $68.92\%\;to\;80.08\%$ by the proposed character segmentation.

• Animal Bioscience
• /
• v.34 no.4
• /
• pp.575-583
• /
• 2021

Objective: The aim of the study was to determine the effect of parity and the stage of lactation on the metabolic profile of cows based on the basic chemical milk components and the blood parameters. Methods: The study material consisted of high-yielding Holstein-Friesian cows. In total, 473 cows were examined. According to the parity, cows were divided into four groups: primiparous (P), and multiparous in the second (M2), in the third (M3), and in subsequent lactations (M4). The feeding of cows was based on total mixed ration (TMR) ad libitum. Milk and blood samples were collected individually from each cow three times per standard lactation period. Results: Greater exacerbation of changes in the dynamics of the blood plasma parameters examined was proved for multiparous cows. The highest value of β-hydroxybutyrate acid (0.946 mmol/L) was found for multiparous cows from group M3 at the beginning of lactation. However, it was still in the normal range. The results showed aspartate aminotransferase, and gamma-glutamyl transferase (GGT) activities in dairy cows during lactation had significant variations taking in to account stage of lactation. The highest activity of GGT was found in the group of the oldest cows and measured from 26.36 U/L at the beginning of lactation to 48.75 U/L at the end of the lactation period. Conclusion: The time-related changes in the concentrations of the biochemical parameters described differ markedly among lactating cows, though the housing conditions on the research dairy farm are highly standardised. This indicates that the ability to cope with metabolic stress is mainly affected by the individual predispositions of cows and feed nutrient supply in different stage of lactation. Especially, the feed nutrient supply (in net energy for lactation), which was the best in TMR 1 in comparison TMR 3.