• Journal of Navigation and Port Research
• /
• v.27 no.6
• /
• pp.639-643
• /
• 2003

The emphasis is put on the detailed knowledge on manoeuvring characteristic for the safe navigation while avoiding terrible collision between ships and on the guideline to the design and operation of the ship-waterway system The numerical simulation of manoeuvring motion was carried out parametrically for different ship types, ship-velocity ratios, separation and stagger between ships. As for the calculation parameters, the ratios of velocity difference (hereafter, $U_2$/$U_1$ ) between two ships were considered as 0.6, 1.2, 1.5. From the inspection of this investigation, it indicates the following result. Considering the interaction force only as parameter, the lateral distance between ships is necessarily required for the ship-velocity ratio of 1.2, compared to the cases of 0.6 and 1.5 regardless of the ship types. Furthermore, regardless of the ship-velocity ratio, an overtaking and overtaken vessel can be manoeuvred safely without deviating from the original course under the following conditions: the lateral distance between two vessels is approximately kept at 0.5 times of ship-length and 5 through 10. degrees of range in maximum rudder angle. The manoeuvring characteristic based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in restricted waterways.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.76-77
• /
• 2011

국토해양부의 국토지반정보 DB구축사업은 건설현장에서 발생하는 지반조사성과를 전산화하여 재활용할 수 있도록 DB구축, 시스템 보급, 센터 운영 등을 주요수행사업으로 '00년부터 현재까지 10년 이상 지속적으로 추진되고 있다. '07년부터 "지반조사성과전산화및활용에관한지침"이 국토해양부 훈령으로 제정 시행되면서 건설현장에서 발생하는 지반조사성과에 대한 전산화는 건설사가 직접 입력 제출하고 있다. 지침 시행과 함께 국토해양부에서는 국토지반정보 통합DB센터(한국건설기술연구원) 중심으로 지반정보 유통프로세스를 확립하고 지반정보 생산을 위한 지반정보 입력시스템, 검수 등록을 위한 검수등록시스템, 지반정보 유통을 위한 웹유통시스템으로 구성된 국토지반정보 유통시스템을 구축 운영하고 있다. 보급 활용 중인 국토지반정보 유통시스템에 대하여 지반정보 생산자 및 활용자들의 지속적인 개선요구사항들을 수렴하고 있으며, '11년도 사업을 통하여 사용자 중심의 국토지반정보 유통시스템으로 개선 및 추가개발을 추진하였다. 본 연구에서는 건설현장의 의견을 수렴하여 사용자 중심으로 개선한 국토지반정보 유통시스템의 주요 연구내용을 소개한다.

• International Commerce and Information Review
• /
• v.9 no.4
• /
• pp.241-261
• /
• 2007

9.11 terrors which happen in 2001 in the U.S. recognize importance about national security and Department of Commerce, country safety department, Federal Communication Commission(FCC) etc. are establishing RFID sticking plan in harbor exit and entrance container for this, and it is real condition that is preparing preparation of law and system that establishes harbor peace law(Safe Port Act) on October, 2006 and acts on for U.S. about container load cargo Europe and Asia each countries. These law and system is logistics security that strengthen search for import and export freight and security to main contents. To meet in these circumstance subsequent, this paper is to examine the following three themes. First, examined necessity of logistics security and logistics security strengthening tendency, and second, examined in achievement of logistics business and RFID, and third, presented logistics security process that utilize change of realization about logistics security and RFID's role for logistics security. Through upper investigation, this paper suggested the realization about logistics security raising, logistics security connection system construction by export step, real-time freight chase that use RFID, construction necessity of executive system and development of logistics security equipment required.

• Journal of Korean Port Research
• /
• v.14 no.4
• /
• pp.419-427
• /
• 2000

Today travel demand continues to increase with spread of economic zones. Also, urban freeway plays an important role in intra-zone transportations as a major corridor in a big city. However, most of urban freeways experience a severe congestion with the excess of inflowing or outflowing traffic through freeway ramps. The purpose of this study is to identify the traffic characteristics, analyze the relationships between the traffic characteristics and finally construct the speed predictive models on the ramp junctions of urban freeway under the intelligent transportation system(ITS) settings. From the analyses of traffic characteristics following results were obtained: ⅰ) 24 hours average traffic characteristics flow, occupancy, speed under the ITS settings showed about 40%, 38%, 8.8% increase each on urban freeway junctions period when compared with that under the non-ITS settings each other. Free flow speed and traffic flow on the mainline sections of urban freeway under the ITS settings also showed about 20% and 17% increase when compared with that under the non-ITS, respectively. ⅱ) The upstream when compared speed( $S_{u}$)and downstream occupancy( $O_{d}$) were especially shown to have higher explanatory powers on the stable flow ramp junctions, but the upstream speed( $S_{u}$) and downstream flow( $V_{d}$) were especially shown on the unstable flow ramp junctions of urban freeway under the ITS settings.ngs.ngs.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.1414-1417
• /
• 2012

현대의 프로그램들은 과거의 프로그램들에 비해 복잡성이 커졌다. 그러한 변화에 따라 협력 프로젝트가 과거에 비해 일반화 되었고, 프로그램의 디버깅이 어려워졌다. 현대의 프로그래머들에게는 원활한 협력 프로젝트의 진행과 쉬운 디버깅을 위해 코딩 스타일 준수의 중요성이 부각되고 있다. 프로그래머가 소스 코드를 작성할 때 코딩 스타일의 준수 여부는 가독성에 큰 영향을 미친다. 하지만 프로그래머가 코딩 스타일을 준수하지 않는다고 해도 눈에 보이는 에러가 발생하지 않는다. 그렇기 때문에 코딩 스타일은 초심자 시절의 교육이 중요하다. 이 논문에서는 효과적으로 코딩 스타일을 교육하기 위한 스타일 직소 프로그램을 구현하였다. 스타일 직소 프로그램은 코딩 스타일의 준수 정도 직소 퍼즐 형태로 보여주고, 코딩 스타일이 준수되지 않은 부분을 표시하여 줌으로써 보다 효과적으로 코딩 스타일 교육이 가능하게 한다. 본 논문에서 구현된 스타일 직소 효과를 확인하기 위해 부산대학교 컴퓨터공학과 학부 학생들을 대상으로 스타일 직소를 사용하여 코딩 스타일 교육을 실시하였다. Java 프로그래밍 교과 실습 수업에 스타일 직소 프로그램을 적용시켜 본 결과 64%의 학생이 스타일 직소가 코딩 스타일 향상에 도움이 되었다고 답하였고, 52%의 학생이 본 프로그램의 접근법이 흥미로웠다고 답하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.2
• /
• pp.148-156
• /
• 2008

In this study it will be discussed how to solve the problem of discomfort from rolling motion on the fishing boats. Most discomfort is caused by the short cycle of rolling due to the light weight of the boats. The light weight is due to the FRP material which dries a boat. A way to improve the feeling of boarding by using fish hold was researched. The experiment was done on experimental fishing boat made by FRP in Jeju. An existing fish hold was designed and manufactured through the rolling test and that was used for a marine experiment. The rolling condition of the U-tank boat ideally designed was compared to that of an existing fishing boat using the same conditions. The experiments were carried out two times on the stop engine in the outward Sehwa fishing port, which the experimental data had analysed for effects of rolling reduction to compare the U - tank with the of exiting fish hold. The results were confirmed that the U-boat tank in the roll period and GoM were more safe than the existing fish hold and the average amplitude and significant of rolling angles were decreased relatively.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.6
• /
• pp.371-377
• /
• 2007

In this paper, we propose the effective operating device in the container freight station by applying the RTLS (Real Time Location System) that provides information on the container's location in real time so that the performance of the port operating system can be improved. For this, we proposed the improved dual cycling method made with the new application of two types of container's location & yard tractor's location information. we applied the RTLS to the container freight station to send the container location data to the operating system in real time; we designed the data on the Yard Tractor's location to be received via the GPS receiver and then be sent to the operating system in real time via the CDMA module. According to the analysis and evaluation of the performance of the proposed method, up to 24% of performance improvement was shown compared with the existing methods, in aspect of evaluation of work time, work time deviation and performance. Therefore, we proved that the RTLS and the GPS receiver are essential elements for efficient port operation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.375-388
• /
• 2017

In order to solve the traffic congest and environmental issues, small-cross section tunnel for small car only is increasing, but there is not standard for installation of disaster prevention facility. In this study, in order to investigate the behavioral characteristics of thermal environment and smoke in a small cross section tunnels with a large port exhaust ventilation system, the A86, the U-Smartway and the Seobu moterawy tunnel, Temperature and CO concentration in case of fire according to cross sectional area, heat release rate and exhaust air flow rate were analyzed by numerical analysis and the results were as follows. As the cross-sectional area of the tunnel decreases, the temperature of the fire zone increases and the rate of temperature rise is not significantly affected by heat release rate. However, there is a difference depending on the change of the exhaust air flow rate. In the case of applying the exhaust air flow rate $Q_3+2.5Ar$ of the large port exhaust ventilation system, the temperature of the fire zone was 7.1 times for A86 ($Ar=25.3m^2$) and 5.4 time for U-smartway ($Ar=37.32m^2$) by Seobu moterway tunnel ($Ar=46.67m^2$). The CO concentration of fire zone also showed the same tendency. The A86 tunnels were 10.7 times and the U-Smartways were 9.5 times more than the Seobu moterway. Therefore, in the case of a small section tunnel, the thermal environment and noxious gas concentration due to the reduction of the cross-sectional area are expected to increase significantly more than the cross-sectional reduction rate.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.1 no.1
• /
• pp.9-25
• /
• 1995

Although the studies carried out in recent years have provied much new information about channel widths and alignment, they are not consistent in their results. In addition, as a result of variations in local condition and type of traffic accommodated, the dimensions of the channel widths vary over a wide range. Therefore, the recommendation made by the maritime engineering organizations over the world, do not offer detailed and decisive optimal design criteria and are all different. It, therefore, was attempted in this paper to draw a decisive guideline on the optimal widths and alignment of the navigational channels, which can be utilized by the port designers at the stage of the planning. The guideline was drawn through the comparison and analysis of the existing guidelines of the U.S.A, Japan and PIANC and simulation experiment. The simulation experiment was carried out using the "Off Line Port and Waterway Design Simulator" to find the optimal dimensions of the widths of the navigational channels. 90 different simulation runs were conducted at the 3 different secenario channels. New guidelines, the result of the study, is expected to be used usefully by the Korean port designers when designing the rapodly developing ports in Korea. in Korea.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.317-323
• /
• 2006

The objective of this study is to test and modify the gantry travel mechanism of an ALV(automated lifting vehicle) as a main technology of development of ALV. For the purpose of the improvement of container terminal productivity, this study performed to develop the ALV as a part of R&D. In order to verify the design data and detect the errors of detailed drawings, we performed the various limited weight test under load and unload conditions. Through the reflect of final drawing based on the this test, we could use to produce the more complete vehicle.