• 융합보안논문지
• /
• 제13권4호
• /
• pp.11-17
• /
• 2013

모든 u-헬스케어 시스템은 보안 취약점을 가지고 있다. 이 취약점은 로컬(local) 또는 네트워크(network) 상에서 잠재적인 위험이 된다. 의료정보 기술의 Smart 환경, Ad-hoc networking, 무선통신 환경은, u-헬스케어 보안 취약성을 증가시키는 주요 요인이다. u-헬스케어 의료정보시스템 도메인은 사용자단말 구간, 공중통신망 인프라구간, 네트워킹구간, 인트라넷구간으로 구분된다. 의료정보시스템 도메인별을 구분하여 취약점을 평가하는 이유는 도메인별로 취약점에 대한 대처방법이 다르기 때문이다. u-헬스케어시스템 5단계의 보안위험도 평가체계는 도메인별 보안취약성 진단체계를 설계하여 보안대책을 강구하기 위해 필요하다. 제안하는 모델을 사용할 경우 현재까지 막연하게 진행 되어온 USN 기반 의료정보네트워크 보안취약성 진단대책을 좀 더 체계적으로 수행할 수 있는 모형을 제공한다.

• 한국산학기술학회논문지
• /
• 제13권1호
• /
• pp.406-411
• /
• 2012

지반의 비배수강도 값 결정을 위하여 최근 콘 관입시험 결과가 많이 활용되고 있다. 그러나 비배수강도 값은 콘 계수 값에 절대적으로 의존하며, 해당 지역에 적합한 콘 계수 값의 결정을 위하여는 많은 시험결과의 축적 및 분석이 필요하다. 본 연구에서는 경기도 시화지구 북동지역 점성토 지반에 대하여 수행된 현장베인시험, 일축압축시험 및 비압밀비배수 삼축압축시험 결과를 이용하여 각 시험결과별 콘 계수 값을 산정하였으며, 이를 비교 분석하였다. 전통적 콘 계수 $N_{kt}$, $N_{ke}$, $N_e$ 및 새로운 콘 계수 $N_e$ 값들은 각각 12, 11, 3, 13으로 산정되었으며, $N_{{\Delta}u}$와 간극수압비 Bq 사이에 특정한 경향이 있음이 고찰되었다.

• 한국화재소방학회논문지
• /
• 제32권3호
• /
• pp.27-34
• /
• 2018

본 연구는 송엽분과 질석을 주 원료로 하여 건축용 및 선박용으로 적용될 수 있는 준불연 단열복합보드를 개발하고 불연성능, 준불연성능, 보드 전체의 열관류율을 평가하였다. 가연성 물질인 송엽분과 유연바인더의 비율에 따라 보드의 화재저항성능이 결정되었으며, 가연물질이 불포함된 보드의 경우 불연성능을 확보하였다. 송엽분 6%를 첨가한 보드는 준불연 성능을 확보할 수 있었으며, 그 이상의 송엽분이 포함되거나 가연성의 바인더가 첨가될 경우 준불연 성능을 확보할 수 없는 것으로 나타났다. 또한, 글래스울과 폴리우레탄 뿜칠을 단열층으로 하고 개발된 불연/준불연 보드를 이용하여 1차 마감한 복합벽체는 200 mm 두께에서 국내법규 상의 건축물 단열기준을 상회하여 만족하는 것으로 나타났다.

• 대한방사선치료학회지
• /
• 제11권1호
• /
• pp.28-32
• /
• 1999

Verifying the treatment value(Monitor Unit) unnecessarily involves too many simple and repetitive calculation processes, that is, individual computation process using the data(PDD value, Scp Factor, SSD Factor, Tray Factor) on the data book. We intend to minimize the time required to check the Monitor Unit through computerized calculation. Using $^{\ast}(multiplication)$, /(division), +(sum), if function, among others, which are present in the Excell program, MS office program, the Monitor Unit was obtainable through A/P value, Scp Factor and PDD value, Wedge Factor. From the verification of the computations of Monitor Unit for 60 patients previously treated, we were able to obtain an error rate of ${\pm}0.028MU$. Computerized calculation of the Monitor Unit could save the burden of Technologist.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.194-197
• /
• 1996

The high-strength aluminum alloy 7075-T651 was used to observe the fatigue-crack-propagation behavior for the various stress ratios with constant amplitude loading and thus to predict the fatigue life. With a chevron notch in the specimen the fatigue-crack-propagation behavior of through crack was investigated. Crack propagation behavior of through crack in the depth direction and crack growth of weldments were experimentally studied. Base material heat affected zone and weld material were considered in the fracture of weldments. The change of crack-propagation length with respect to several parameters such as stress intensity factor range(ΔK) effective stress intensity factor range(ΔKeff)ration of effective stress intensity factor range(U) stress intensity factor of crack opening point(K op) maximum stress intensity factor(K max) and number of cycles(Nf)was determined. The crack length of through crack of weldments was 2.4mm and the remaining part was a base material. The experiment was accomplished by making the crack propagate near the base material.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제43권2호
• /
• pp.63-69
• /
• 2017

Nuclear factor I-C (NFI-C) plays a pivotal role in various cellular processes such as odontoblast and osteoblast differentiation. Nfic-deficient mice showed abnormal tooth and bone formation. The transplantation of Nfic-expressing mouse bone marrow stromal cells rescued the impaired bone formation in $Nfic^{-/-}$ mice. Studies suggest that NFI-C regulate osteogenesis and dentinogenesis in concert with several factors including transforming growth factor-${\beta}1$, $Kr{\ddot{u}}ppel$-like factor 4, and ${\beta}$-catenin. This review will focus on the function of NFI-C during tooth and bone formation and on the relevant pathways that involve NFI-C.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권8호
• /
• pp.529-535
• /
• 2000

In this paper, a current control system of a single phase PWM AC/DC converter using a reduced-order Luenberger observer without source voltage sensors is proposed. The sinusoidal input current and unity input power factor are realised based on the estimated source voltage performed by the reduced-order Luenberger observer using actual currents and DC link voltage. The poles of the reduced-order Luenberger observer are placed in the left half plane of s-plane by the pole-placement method in order to acquire the stability of the observer. The magnitude and the phase of the estimated source voltage are used to accomplish the unity power factor. The proposed method is implemented by DSP(Digital Signal Processor). Experimental Results verify that the reduced-order observer estimates the source voltage without the estimation error and the control system accomplishes the unity power factor, and constant DC link voltage.

• 한국시뮬레이션학회논문지
• /
• 제11권1호
• /
• pp.59-70
• /
• 2002

This article presents the results of research to develop a descriptive model of firm-level productivity that will allow a myriad of factor interactions to be directly accounted for. The model is a linked set of equations that attempt to capture how changes in one-factor influences the level of another factor. and ultimately bottom-line performance. The model is coded in SIMAN. It is used to determine the best use of an infusion of funds should they go for additional automation, or training etc. An application of the model to U.S. industry is presented based on parameter values obtained through a national survey.

• 한국대기환경학회지
• /
• 제20권5호
• /
• pp.615-623
• /
• 2004

This study was conducted for developing the emission factors of nitrogen oxide(NOx) and carbon monoxide (CO) from the combustion boilers burning liquefied natural gas (LNG). These emission factors were compared with those of U.S. EPA and European Environment Agency (EEA). NOx and CO concentration in the flow gas were measured using Kane-May, KM9106 and Thermo Environmental Instruments Inc., 42C-HL. Measurement were conducted at thirty industrial and commercial LNG boilers. Emission factors were calculated on the basis of fuel consumption (kg-pollutant/㎥-fuel burned). NOx concentration at industrial boiler was 14~125 ppm and it was measured as 35~125 ppm at commercial boiler. NOx emission factors of industrial boiler and commercial boiler were 1.84kg/$m^3$ and 2.09kg/$m^3$, respectively. NOx emission factor of commercial boiler was higher than that of industrial boiler. The NOx emission factors estimated in this study were lower than those of U.S. EPA and higher than those of EEA. Average CO emission factor of industrial boiler was 0.65 kg/$m^3$ and at commercial boiler it was 0.70kg/$m^3$, CO emission factor at industrial boiler was lower than that at commercial boiler.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.59-67
• /
• 2002

The comparison of $J_{Rice}$-resistance considering a few strength ratio in Rice J-integral formula and $J_{\delta}$-resistance curves converted from experimental CTOD using appropriate strength chosen according to strain hardening level, n=10.6 (A533B steel) and n=8.1 (BS4360 steel) is carried out. The optimal dimensionless strength ratio like the factor of revision, (see full text)reflecting strain hardening level in Rice\`s experimental formula is found out and the reliability of appropriate reference strength chosen according to strain hardening level in different materials is investigated through doing that CTOD is transformed from $J_{\delta}$-integral using relationship between J-integral and CTOD. The results are as follows; 1) The optimal factor of revision is when m equals to 3 in (see full text) for Rice's and the above optimal factor of revision multiplies by coefficient, η in Rice's experimental formula instead of n=2, 2) and the pertinent reference strength for high strain hardening material like BS4360 steel is ultimate strength, $\sigma_{u}$ and for material like A533B steel is ultimate-flow strength, $\sigma_{u-f}$. The incompatible of the behavior of both experimental J-resistance curves using Rice's formula and CTOD-resistance curves for A533B and BS4360 steel by Gordon, et al., could be corrected using the optimal factor of revision in Rice\`s and the pertinent reference strength in J=$m_{j}$${\times}$$\sigma_{i}$${\times}$CTOD.