• Ocean Science Journal
• /
• v.40 no.1
• /
• pp.55-59
• /
• 2005

We cloned the complete cDNA of the ${\beta}-bubulin$ from the soft coral, Scleronephthya gracillimum $(K\ddot{u}kenthal)$ (Alcyonacea, Octocorallia, Anthozoa, Cnidaria), via the random sequencing of a cDNA library and the 5'-rapid amplification of cDNA end (RACE) technique. The full-length cDNA of the S. gracillimum ${\beta}-tubulin$ comprised 1541 bp, not including the poly $A^+$ stretch, also contained a complete open reading frame, which codes for a total of 445 amino acids. The amino acid residues 16402 appeared to be in a state of conservation in a variety of animals. Northern blot analysis clearly demonstrated that the sequence we have obtained is, indeed, the full-length cDNA of the ${\beta}-bubulin$ gene in S. gracillimum.

• Advances in concrete construction
• /
• v.2 no.4
• /
• pp.281-300
• /
• 2014

This study presents the experimental results of twenty three reinforced concrete beams with rectangular web openings externally strengthened with Fiber Reinforced Polymers (FRP) composites bonded around openings. All tested beams had the same geometry and reinforcement details. At openings locations, the stirrups intercepted the openings were cut during fabrication of reinforcement cage to simulate the condition of inclusion of an opening in an existing beam. Several design parameters are considered including the opening dimensions and location in the shear zone, the wrapping configurations, and the amount and the type of the FRP composites in the vicinity of the openings. The wrapping configurations of FRP included: sheets, strips, U-shape strips, and U-shape strips with bundles of FRP strands placed at the top and sides of the beam forming a fan under the strips to achieve closed wrapping. The effect of these parameters on the failure modes, the ultimate load, and the beam stiffness were investigated. The shear contribution of FRP on the shear capacity of tested beams with web openings was estimated according to ACI Committee 440-08, Canadian Standards S6-06, and Khalifa et al. model and examined against the test results. A modification factor to account for the dimensions of opening chords was applied to the predicted gain in the shear capacity according to ACI 440-08 and CSA S6-06 for bonded Glass Fiber Reinforced Polymers (GFRP) around openings. The analytical results after incorporating the modification factor into the codes guidelines showed good agreement with the test results.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1893-1908
• /
• 2021

In light of the importance of helium production in influencing the behaviour of fast reactor fuels, in this work we present a burn-up module with the objective to calculate the production of helium in both in-pile and out-of-pile conditions tracking the evolution of 23 alpha-decaying actinides. This burn-up module relies on average microscopic cross-section look-up tables generated via SERPENT high-fidelity calculations and involves the solution of the system of Bateman equations for the selected set of actinide nuclides. The results of the burn-up module are verified in terms of evolution of actinide and helium concentrations by comparing them with the high-fidelity ones from SERPENT, considering two representative test cases of (U,Pu)O₂ fuel in fast reactor conditions. In addition, a code-to-code comparison is made with the independent state-of-the-art module TUBRNP (implemented in the TRANSURANUS fuel performance code) for the same test cases. The herein presented burn-up module is available in the SCIANTIX code, designed for coupling with fuel performance codes.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.60-67
• /
• 2013

A diffusion coefficient is an important parameter in the prediction of atmospheric dispersion using a Gaussian plume model, and its modelling approach varies. In this study, dispersion coefficients recommended by the U. S. Nuclear Regulatory Commission's (U. S. NRC's) regulatory guide and the Canadian Nuclear Safety Commission's (CNSC's) regulatory guide, and used in probabilistic accident consequence analysis codes MACCS and MACCS2 have been investigated. Based on the atmospheric dispersion model for a hypothetical accidental release recommended by the U. S. NRC, its influence to atmospheric dispersion factor was discussed. It was found that diffusion coefficients are basically predicted from a Pasquill- Gifford curve, but various curve fitting equations are recommended or used. A lateral dispersion coefficient is corrected with consideration for the additional spread due to plume meandering in all models, however its modelling approach showed a distinctive difference. Moreover, a vertical dispersion coefficient is corrected with consideration for the additional plume spread due to surface roughness in all models, except for the U. S. NRC's recommendation. For a specified surface roughness, the atmospheric dispersion factors showed differences up to approximately 4 times depending on the modelling approach of a dispersion coefficient. For the same model, the atmospheric dispersion factors showed differences by 2 to 3 times depending on surface roughness.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.1
• /
• pp.20-31
• /
• 2005

In this study, subsonic flutter analyses have been conducted for a composite smart UAV with T-tail configuration at the critical flight condition. Detailed three-dimensional finite element model for dynamic analysis is constructed including its nonstructural elements corresponding to installed electronic equipments and fuels. Computational structural dynamics and aeroelastic techniques are conducted using MSC/NASTRAN and originally developed in-house codes. The results for fundamental vibration characteristics and flutter instabilities are presented and compared to each other for different fuel conditions.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.209-214
• /
• 1997

In this paper, we propose a new preorder tree method for binary images, named the Compact Complementary Quadtree (CCQ). In the proposed method we use type codes for representing nodes in the quadtree instead of using the symbols G, B, and W. From the experimental results, we have confirmed that the CCQ has a higher compression ratio than of the DF-expression. CCQ can be effectively applied to progressive transmission of binary images such as line drawings, geographical maps, and halftones.

• Journal of Korean Library and Information Science Society
• /
• v.25
• /
• pp.475-500
• /
• 1996

The purpose of this study is to survey the development trends of school libraries in the western world namely U. S. A., Canada by analyzing such items as education and environment, staff, policy, standard and professional organization, and to find out how and why they were able to maintain efficient library services. The major findings are summarized as follows : (1) There are school district supervisor whose functions are to direct and supervise the school libraries in the district. (2) The school district supervisor, school administrator, Teacher and Teacher librarian all recognize the importance of its educational role and cooperate together for the development. (3) They gether statistical data on school library for continuous revision of statement, guideline and standard. (4) Not only the educational organization and the library organization but also the private foundation conduct systematic research and extend financial aid for the development of school library. (5) The Compulsory Codes and pertinent laws have been enacted to promote school library development.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11b
• /
• pp.557-560
• /
• 2003

In this paper, we developed an editor and running engine for the SoftPLC. LD is the most popular standard IEC 1131-3 PLC language in Korea and used over 90% among the 5 PLC languages. In this paper, we have developed the ISPLC(Intelligent Agent System based Software Programmable Logic Controller). In ISPLC system, LD programmed by a user is converted to IL, which is one of intermediate codes, and IL is converted to the standard C code which can be used in a commercial editor such as visual C++. In ISPLC, the detection of logical error in high level programming(C) is more efficient than PLC programming itself. ISPLC provide easy programming platform to such beginner as well as professionals. The study of code conversion of LD-> U->C is firstly tried in the world as well as KOREA.

• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.306-312
• /
• 1999

In the recent sheet metal forming simulations, it increases to adopt the dynamic explicit method for an effective computation and the elastoplastic formulation for stress recovery. It is inevitable in the dynamic explicit method that some noises occur, which sometimes partly spoil results of simulations. This phenomenon becomes severer when complicate contact conditions are included in simulations. In commercial dynamic codes, the concept of contact damping is introduced. However, the formulation process of it is not revealed well. In this paper, a contact damping method is formulated in order for effectively suppressing noises occurring due to complicated contact conditions. This is checked by analyzing a simple sheet metal stamping process (U-draw bending). From the computational results, it is shown that the contact damping can effectively control the noises due to contacts, especially when considering the sheet thickness, and help to develop more reliable internal stress states, which result in more realistic shapes after springbank.

• Structural Engineering and Mechanics
• /
• v.54 no.3
• /
• pp.545-560
• /
• 2015

In this paper, blast-induced vibration effects on buildings located in rural areas were investigated. Damages to reinforced concrete, adobe and masonry buildings were evaluated in Çatakk$\ddot{o}pr\ddot{u}$ and Susuz villages in Silvan district of Diyarbakir, Turkey. Blasting of stiff rocks to construct highway at vicinity of the villages damaged the buildings seriously. The most important reason of the damages is lack of engineering services and improper constructed buildings according to the current building design codes. Also, it is determined that, inappropriate blast method and soft soil class increased the damages to the buildings. The study focuses on four points: Blast effect on buildings, soil conditions in villages, building damages and evaluation of damage reasons according to the current Turkish Earthquake Code (TEC).