• 수산해양기술연구
• /
• 제56권2호
• /
• pp.138-146
• /
• 2020

Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

• 대한조선학회논문집
• /
• 제29권4호
• /
• pp.104-113
• /
• 1992

압력이 차 있는 백이 물에 부분적으로 잠겨서 동요하고 있을 때의 유체역학적 문제가 다루어졌다. 쌍동형 공기부양선(SES)의 선미에는 공기의 유출을 막기위해 공기압이 채워진 백을 설치하고 있는데, 백에 의한 힘이 종동요에 큰 영향을 미친다. 백의 모양은 안과 밖의 압력차에 의해서 결정되므로, 유체동압력을 구하면 백의 모양을 알 수 있는데, 백의 모양변화를 알아야지만 유체동압력을 구할 수가 있다. 따라서 백 표면에서의 경계조건의 형태는 자유표면 경계와 더불어서 움직이는 경계가 된다. 본 논문에서는 이 문제를 정식화하고 선형화를 하였다. 또한 백이 동요할 때의 방사문제에 대한 계산예를, 백을 강체로 가정했을 때의 비교하여, 보여주고 있다. 여러가지의 백내의 압력값, 또 물에 잠긴 깊이에 대해서 계산이 이루어졌다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권5호
• /
• pp.56-67
• /
• 1994

The installation methods of diesel engines in ships would be largely classified into two groups : one is the direct mounting system fixing engine directly into double bottom of the hull, and the other is the resilient mounting system having vibration absorbers between engine and ship body such as rubber plate to prevent shocks or vibration transmission. The direct mounting system is generally used for large-sized low speed diesel engines, because the resilient mounting system has difficulties in reducing the natural frequency of engine itself under normal speed. On the contrary, the resilient mounting system is often used for medium or high speed engines for marine propulsion and generator that have light weight and high revolution speed. Recently, it is even applied to engines having relatively low speed(300-400rpm) for fishing boats. Although many researches for the resilient mounting system have been carried out, many problems in applying these results directly to marine vessels because most of these have been used for automobiles. Up to now we have had to depend on the professional foreign company in design and the supply of parts for the resilient mounting system of marinediesel engines utterly. In preseut study, the exciting forces of engines effecting to resilient mounting were examined, and patterns of vibration and evaluation procedure for force transmission from resilient mounting to the body of hull were established. Also, these results were applied to the analysis of free and forced vibration for the rubber-type resilient mounting systems of marine diesel engines. Besides, after changing the various design parameters, such as locations, angles, dynamic characteristics and the number of resilient mountings, the influences on resilient mounting system were also examined.

• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.342-349
• /
• 2007

Following the 2002 World-Cup held in Korea, studies have been actively conducted on plans to utilize all-weather stadiums of fine figures, where large-scale spaces are available for various utilizations. In Japan, dome-type stadiums have been built and are utilizing across the whole nation not only for sports events but also variety of other large-scale events. PTFE(poly tetra fluoro ethylene) is one of the membrane material mainly used for the outer ceiling surface of membrane structures. However, there has not been enough research on the acoustical properties of PTFE membrane material which has been widely used in the multi-purpose stadiums. In this study, air permeability values and sound absorption coefficient of PTFE membrane materials were measured and evaluated in the gymnasium. From the results of measurements of sound absorption coefficient and air permeability of inner membrane materials, it was found that the sound absorption coefficient was good in the air permeability range of $5{\sim}15\;cc/cm^2/s$. Also the relation ship between air permeability and sound absorption coefficient was very high and the sound absorption coefficient was the highest in the range of $6{\sim}9\;cc/cm^2/s$. Secondly, an analysis on the measurements sound absorption characteristics of inner membrane material reveals that the overall sound absorption coefficient was stabilized(higher than 0.5 throughout the whole frequency bands) when the air space behind the membrane material was deeper than 600 mm. When PTFE sound absorptive membrane material was installed in the ceiling of gymnasium, it was confirmed that sound absorptive membrane material can reduce reverberation and increase speech intelligibility in the gymnasium.

• 한국항해항만학회지
• /
• 제43권6호
• /
• pp.437-443
• /
• 2019

항로표지는 선박에 대하여 등광, 형상, 색채, 음향, 전파 등을 수단으로 운항 선박에게 위치, 방향 및 장애물의 위치 등을 알려주는 항행보조시설 일체를 의미하며, 주야간 선박항행의 안전을 위한 기본 수단이다. 예인선은 안전을 위해 종류별 최소 설비요건을 마련하여 사고를 대비하고 있지만, 예인삭의 길이, 조류의 영향, 상대적으로 중량이 큰 부선의 타력으로 인한 영향 등으로 예인선과 선회권이 달라, 변침 시 부선이 예인선을 따라가지 못하여 등부표와 추돌하는 사고가 발생하기도 한다. 본 연구의 목적은 두 선박의 물리적 관계를 분석하여 예인선열을 식별하고 등부표와의 위험을 항로표지 관리운영 시스템을 통해 전파하는 기초 시스템을 제시하는데 있다. 연구를 통해 예부선의 사전 식별 가능성을 확인하였고, 위험 전파를 위한 메시지를 설계하고 모의 시스템을 통한 위험 전파 및 전자해도 상에 위험을 표시하였다.

• 수산해양기술연구
• /
• 제56권2호
• /
• pp.183-192
• /
• 2020

This study conducted the experiment for the development of the low pressure type SCR system. The experimental equipment of SCR system was installed, which was widely used as the nitrogen oxides abatement system, and the demonstration experiment was conducted to see that it met the Tier III regulation according to the IMO NOx Technical Code. The SCR system demonstration experiment was divided into three stages: SCR system component operation test, engine parameter test by engine load, and NOx abatement performance and ammonia slip verification test. The final performance of the SCR system was verified through analysis of NOx abatement performance and ammonia slip test results for each load variation.

• 한국해양공학회지
• /
• 제35권2호
• /
• pp.141-149
• /
• 2021

The A60 class deck penetration piece is a fire-resistance apparatus installed on the deck compartment to protect lives and to prevent flame diffusion in the case of a fire accident in a ship or offshore plant. In this study, the sensitivity of the fire-resistance performance and approximation characteristics for the A60 class penetration piece was evaluated by conducting a transient heat-transfer analysis and fire test. The transient heat-transfer analysis was conducted to evaluate the fire-resistance design of the A60 class deck penetration piece, and the analysis results were verified via the fire test. The penetration-piece length, diameter, material type, and insulation density were used as the design factors (DFs), and the output responses were the weight, temperature, cost, and productivity. The quantitative effects of each DF on the output responses were evaluated using the design-of-experiments method. Additionally, an optimum design case was identified to minimize the weight of the A60 class deck penetration piece while satisfying the allowable limits of the output responses. According to the design-of-experiments results, various approximate models, e.g., a Kriging model, the response surface method, and a radial basis function-based neural network (RBFN), were generated. The design-of-experiments results were verified by the approximation results. It was concluded that among the approximate models, the RBFN was able to explore the design space of the A60 class deck penetration piece with the highest accuracy.

• 한국항해항만학회지
• /
• 제28권10호
• /
• pp.891-897
• /
• 2004

본 연구에서는 수직블록배치형태를 가지는 자동화 컨테이너 터미널을 대상으로 안벽과 야드의 연계작업을 수행하는 이송장비에 대한 시뮬레이션 모델을 수립하였다. 일반적으로 컨테이너 터미널은 안벽장비의 생산성으로 효율성이 평가되며, 안벽장비의 생산성을 최대화하기 위해서는 이송장비와 야드장비의 원활한 지원이 이루어져야 한다. 이중 이송장비는 안벽장비와 직접적으로 연계작업을 수행하므로 안벽장비의 생산성에 많은 영향을 미치는 요소이며, 운행대수와 주행방식에 따라 작업성능 또한 매우 달라지게 된다. 따라서, 본 연구에서는 이송장비의 작업생산성을 평가할 수 있는 시뮬레이션 모델을 개발하였으며, 수립된 모델을 통해 가상의 환경에서 다양한 이송장비의 운영에 따른 안벽장비의 생산성을 분석해 보았다.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권4호
• /
• pp.167-179
• /
• 2017

In this paper, a simplified Cubature Kalman Filter (SCKF) is proposed to reduce the computation load of CKF, which is then used as a filter for transfer alignment of shipboard INS. CKF is an approximate Bayesian filter that can be applied to non-linear systems. When an initial estimation error is large, convergence characteristic of the CKF is more stable than that of the Extended Kalman Filter (EKF), and the reliability of the filter operation is more ensured than that of the Unscented Kalman Filter (UKF). However, when a system degree is large, the computation amount of CKF is also increased significantly, becoming a burden on real-time implementation in embedded systems. A simplified CKF is proposed to address this problem. This filter is applied to shipboard inertial navigation system (INS) transfer alignment. In the filter design for transfer alignment, measurement type and measurement update rate should be determined first, and if an application target is a ship, lever-arm problem, flexure of the hull, and asynchronous time problem between Master Inertial Navigation System (MINS) and Slave Inertial Navigation System (SINS) should be taken into consideration. In this paper, a transfer alignment filter based on SCKF is designed by considering these problems, and its performance is validated based on simulations.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1170-1174
• /
• 2014

추진기에서 캐비테이션이 발생되면 효율이 저하되고 진동과 소음이 발생한다. 소음은 캐비테이션이 처음으로 발생되는 시점부터 크게 증가되므로 캐비테이션 초생속도(CIS)를 가능한 높이는 것이 중요하다. 본 논문에서는 가변추진기의 캐비테이션 초기발생 현상을 확인하기 위하여 처음으로 캐비테이션 실선관측을 수행하였다. 관측 결과 가변추진에서 캐비테이션 초기발생은 볼트 캐비테이션으로 확인되어 볼트부위를 개선한 새로운 형상의 가변추진기를 제안하였다. 개선된 가변추진기에서는 볼트 캐비테이션이 전혀 발생되지 않았으며, CIS는 개선 전 가변추진기 보다 약 4.5 노트 향상된 것을 확인하였다. 본 연구 결과는 향후 저소음 가변추진기 개발과 CIS 성능 향상에 매우 유용한 자료로 활용될 것이다.