• 한국대기환경학회지
• /
• 제32권4호
• /
• pp.384-393
• /
• 2016

In this study, two kinds of industrial filter bags were tested for their filtration performance to apply the existing bag filter systems. Experimental variables were examined for pressure drop, cleaning interval, residual pressure drop, cleaning efficiency, fractional grade efficiency, total collection efficiency according to the filter bag structure. According to these results, the filter bags tested in this study demonstrated good performance in dust collection. This was also true for the double surface filter bag. The lifetime was longer than the round type filter bag because the filtration area was more than 1.6 times wider and the filter quality factor was much higher. Therefore, double surface filter bags are suggested to be used in order to increase filtration performance of the bag filter systems.

• The Journal of Korean Physical Therapy
• /
• 제22권2호
• /
• pp.1-6
• /
• 2010

Purpose: Our study sought to investigate differences in plantar foot pressure as a function of type of pack carried and of changing weight during gait and stance. Methods: Subjects were 40 students with no disabilities. Plantar foot pressure was measured with different types of packs carried and with changing weight of the pack during both gait and stance and while changing feet. During stance while carrying a satchel on the shoulder caused a disproportionate change in plantar foot pressure. An even great imbalance occurred for plantar foot pressure during gait. Results: Using a satchel can influence diseases such as scoliosis that are caused by unbalanced muscle activation and by a disproportionate distribution of the weight of the body. Conclusion: Knowing how to use a pack correctly and how to appropriately adjust the weight of bag should be taught.

• 환경위생공학
• /
• 제23권3호
• /
• pp.1-8
• /
• 2008

Currently, medical waste stoker incinerator is widely used in the emission control technology of health-care risk waste and miscellaneous contaminated waste. In the past, wet type control technology was used to remove the major harmful gaseous contaminants of medical waste such as HCl, $NO_x,\;SO_2$, CO, DUST, Dioxin. However, the treatment cost for wastewater was high and it has a disadvantage for frozen system during winter season. Therefore, in order to obtain effective treatment, the dry type control technology was developed and widely used to remove the gaseous contaminants. In this study, pre-coated bag filter using hydrated lime, ($Ca(OH)_2$), was applied to the dry type control system and the optimum dose of hydrated lime was investigated. The treatment results showed that the dust collection rate was approximately 26.7%. Moreover, the HCl removal rate using pre-coated bag filter ($50mg/sm^3\;Ca(OH)_2$) was 13.52%, which was significantly higher than 3.26% obtained from conventional bag filter.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.17-20
• /
• 2006

Passenger safety is fundamental factor in automobile. Among much equipment for passenger safety, the air bag system is the most fundamental and effective device. Beside of the front air bag system which installed on most of all automobiles, a curtain-type air bag is increasingly adapted in deluxe cars fur protecting passengers from the danger of side clash. Curtain type airbag system consists of inflator housing, fill hose, curtain airbag. Inflator housing is a main part of the curtain-type air bag system for supplying high-pressure gases to deploy the air bag-curtain. Fill hose is a passageway to carry the gases from inflator housing to each part of curtain airbag. Therefore, it is very important to design the vent holes of fill hose for good performance of airbag deployment. But, the flow information from vent holes of fill hose is very limited. In this study, we measured instantaneous velocity fields of a high-speed flow ejecting from the vent holes of fill hose using a dynamic PIV system. From the velocity Held data measured at a high frame-rate, we evaluated the variation of the mass flow rate with time. From the instantaneous velocity fields of flow ejecting from the vent holes in the initial stage, we can see a flow pattern of wavy motion and fluctuation. The flow ejecting from the vent holes was found to have very high velocity fluctuations and the maximum velocity was about 480m/s at 4-vent hole region. From the mass flow rate with time, the accumulated flow of 4-vent hole has occupied about 70% of total flow rate.

• 한국산업보건학회지
• /
• 제18권3호
• /
• pp.189-203
• /
• 2008

Cylindrical bag filter system with pulse jet cleaning has been the most common device to control particle laden exhaust gas from the various industrial processes. But, it has many shortcomings due to particle reattachment and frequent bag rupture. In recent years, rectangular type bag filter system has been developed to overcome the problems associated with the cylindrical system. However, not many studies about the rectangular system were not done, compared to the cylindrical system. In this study, the optimum pulse jet cleaning conditions were thus tested by the series of experiments. The factors tested in this study are pulse distance, pulse pressure, pulse duration, the number of holes for pulsing and bag materials. A single bag ($1,500mmL{\times}50mmW{\times}300mmH$) system and a multi-bags (3 bags in a row) were tested separately. The highest removal efficiency with a single bag system was found at the conditions with pulse distance of 10cm, pulse pressure of $3kg/cm^2$, pulse duration of 0.3s, pulse jet number of 6 and Polyester bag. With the multi-bags system, the best cleaning conditions were found at the bag interval of 20cm with the simultaneous pulsing and the bag interval of 15cm with the serial pulsing.

• 생물환경조절학회지
• /
• 제22권4호
• /
• pp.408-412
• /
• 2013

본 연구는 토마토 코이어 자루재배시 습해의 원인을 구명하고 습해를 방지하기 위하여 실시하였다. 실험은 미니찰을 고시하고 단동형 2중 플라스틱하우스에서 실시되었다. 배양액은 Yamazaki 토마토 전용배양액을 사용하였으며, 배양액 공급시간은 해뜨고 1시간 후 시작하여 해지기 2시간 전에 종료하였다. 자루당 I자형 찢기 및 L자형 찢기는 6개씩 15cm 길이로 찢었으며, 밑 찢기는 3개씩 15cm 길이로 뚫었다. 배액구 위치에 따른 배지무게는 포습 24시간 후 I자형 찢기는 14.2kg, L자형 찢기는 13.8kg, 밑 찢기는 12.8kg로 밑 찢기가 가장 가벼웠다. 포습 24시간 후 1일 관수하여 무게를 측정한 결과 I자형 찢기는 14.5kg, L자형 찢기 14.2kg, 밑 찢기 13.3kg로 역시 밑 찢기가 가벼웠다. 이것은 밑 찢기에서 배지내 함수량이 가장 적은 것을 의미한다. 부정근 발생정도는 I자형 뚫기 및 L자형 뚫기에서 160 및 170개 발생하였으나 밑 뚫기에서는 53개 발생하였다. 뿌리의 건물중(5주)은 밑 찢기가 57g으로 I자형 찢기 23g 및 L자형 찢기 25g과 비교해서 2배 이상 높았으며, 뿌리길이도 밑 찢기가 31.4cm로 다른 찢기 방법과 비교하여 길었다. 상품수량은 밑 찢기가 26.5kg/20주 로 I자형 찢기 19.7kg, L자형 찢기 24.0kg와 비교해 높은 수량성을 보였다. 따라서 U자형 베드에서 코이어 자루배지를 이용하여 수경재배를 할 경우 배액구는 밑 찢기로 만들어야 습해를 방지하여 생산성을 높일 수 있을 것으로 사료되었다.

• 한국운동역학회지
• /
• 제24권1호
• /
• pp.43-50
• /
• 2014

The purpose of this study was to analyze of the GRF (ground reaction force) parameters according to the change of positions and weights of bag during downward stairs between dominant and non-dominant in upper & lower limbs. To perform this study, participants were selected 9 healthy women (age: $21.40{\pm}0.94yrs$, height: $166.50{\pm}2.68cm$, body mass: $57.00{\pm}3.61kg$, BMI: $20.53{\pm}1.03kg/m^2$), divided into 2 carrying bag positions (dominant arm/R, non-dominant arm/L) and walked with 3 type of bag weights (0, 3, 5 kg) respectively. One force-plate was used to collect GRF (AMTI OR6-7) data at a sample rate of 1000 Hz. The variables analyzed were consisted of the medial-lateral GRF (Fx), anterior-posterior GRF (Fy), vertical GRF (Fz), impact loading rate and center of pressure (COPx, COPy, COP area, COPy posterior peak time) during downward stairs. 1) The Fx, Fy, Fz, COPx, and COP area of GRF were not statistically significant between dominant leg and non-dominant leg, but non-dominant leg, that is, showed the higher COPy, and showed higher impact loading rate than that dominant leg during downward stairs. 2) In bag wearing to non-dominant arm, Fx, Fz, COPx, COPy, impact loading rate and COP area showed increase tendency according to increase of bag weights. Also, against bag wearing to dominant arm, non-dominant showed different mechanism according to increase of bag weights. The Ground Reaction Force parameters showed different characteristics according to the positions and weights of bag during downward stairs between dominant and non-dominant arm.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.639-650
• /
• 2000

여과집진장치의 중요 문제점 중의 하나인 높은 압력손실을 해결하기 위해 하부유입식 원심 여과집진장치의 특성을 실험적으로 분석하는 것이 본 연구의 주목적으로, 실험은 원심 여과집진장치의 집진효율과 압력손실(특히, 여과포 압력손실) 특성을 일반 여과집진기와 비교 분석하기위해 유입유속, 유입농도 및 선회영역의 변화 등과 같은 다양한 파라메터들에 대해 수행하였다. 실험 결과, $1{\mu}m$ 이하의 서브마이크론 입자들에 대해서 접선유입식이 중앙유입식의 경우 보다 높은 집진효율을 보였으며, 총괄집진효율은 99% 이상을 나타내었다. 유입농도 $100mg/m^3$에서, 압력손실 감소율은 유입유속에 따라 large bag의 경우 15~38%인 반면, small bag의 경우 선회영역의 증가에 의해 30~48%이었다.

• 대한조선학회논문집
• /
• 제29권4호
• /
• pp.104-113
• /
• 1992

압력이 차 있는 백이 물에 부분적으로 잠겨서 동요하고 있을 때의 유체역학적 문제가 다루어졌다. 쌍동형 공기부양선(SES)의 선미에는 공기의 유출을 막기위해 공기압이 채워진 백을 설치하고 있는데, 백에 의한 힘이 종동요에 큰 영향을 미친다. 백의 모양은 안과 밖의 압력차에 의해서 결정되므로, 유체동압력을 구하면 백의 모양을 알 수 있는데, 백의 모양변화를 알아야지만 유체동압력을 구할 수가 있다. 따라서 백 표면에서의 경계조건의 형태는 자유표면 경계와 더불어서 움직이는 경계가 된다. 본 논문에서는 이 문제를 정식화하고 선형화를 하였다. 또한 백이 동요할 때의 방사문제에 대한 계산예를, 백을 강체로 가정했을 때의 비교하여, 보여주고 있다. 여러가지의 백내의 압력값, 또 물에 잠긴 깊이에 대해서 계산이 이루어졌다.

• 한국가정과학회지
• /
• 제10권2호
• /
• pp.53-62
• /
• 2007

The purpose of this study is to analyze the formative properties of fashion bag in contemporary fashion. Today fashion bags can be divided into spatial aesthetic, romantic aesthetic, conspicuous aesthetic, active aesthetic. Spatial aesthetic is a type of big bag which is suitable for women carrying lots of things on a daily basis. Romantic aesthetic is a symbol of femininity in respect for its handmade artistry, splendor, decoration, and impracticality by small size. Conspicuous aesthetic embodies human desire of high quality and being part of prestige of luxury brand regardless of its cost. Multi-functional aesthetic was coming form sports gear and are popular among young generation. In comtemporary fashion, bag take important role as the fashion good which make the clothes look better and additionally they are representative products which reflect the historical situation.