• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.5
• /
• pp.92-100
• /
• 2001

This study was conducted to evaluate the growth rate of landscape trees produced in containers for three year, and the growth rate of the establishment period during sixth month~twelve months after transplanting. Two types of container such as plastic pot(pot) and fabric growing bag(bag) were adopted to restrict tree roots. Each type of container was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plant species (Magnolia denudata, Albizzia julibrissin) were planted in the seven sub-types of container. After one or two growing season in the container, the trees of each container type were transplanted. Half of the trees were transplanted in the mild spring season, and the other half were transplanted in the improper summer season. The data was collected on the diameter of root cellar and the tree height in each year. The research results are as follows; 1. Container production method was lower than the traditional production methods by 1.3 times ~ 2 times in the growth rates. 2. The Geocell bag and Root control bag revealed higher growth rates than pp-woven bag. And pot- in-pot(double pot)system revealed higher growth rates than the ether container pot system in A denudata. There were no differences in the growth rates between container production system in Albizzia julibrissin. 3, The growth rates of improper transplanting trees was high in the \"pot\" type - \"bag\" type - \"control\" in descending order. Especially, the growth rates of \"pot\" type revealed higher than \"control\" by 4 times. 4. From the results of ANOVA and Ad hoc test, the variable of growth factors of each container types in improper transplanting experiment was not significant for a range of 5% or 1% level. And the growth rates of traditional production method was lower than the container production method. 5. There was no differences in growth rate between the containerized and the traditional production system in the case of proper transplanting experiment. The growth rates of diameter of root collar was higher in the \"control\". The growth rates of tree height was higher in the \"bag\" type. Finally, based upon the results of this study, subsequent research on the development of container materials and maintaining methods that focused on the growth rates would be required.aintaining methods that focused on the growth rates would be required.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.255-267
• /
• 2004

This study was conducted in order to improvement of fishing gear and fishing operating system for anchovy boat seine by bag net A-type and B-type was attached with half size modified nets. Field experiments were carried out observe geometry of nets by catcher boats. The obtained results are summarized as follows : The actual ratio of net opening in each part of the half size modified nets was increased from fore part to back part of the nets as shown the smallest value about 20% in wing net and the biggest value about 110% in bag net. In addition, vertical net opening of B-type net as measured as 10.9~11.8m in fore bag net and 5.8~8.0m in after bag net were 1~2m greater than 9.0~13.6m of A-type one, and 2~3m less than 9.3~10.4m of A-type one, respectively. Vertical net opening of half size modified net was shown as less variation of towing depth from wing net to inside wing net than those of traditional nets due to stable vertical performance. The mesh distortion or drift and variation of vertical net opening were decreased by improvement of bag nets in order to minimized shape of net pocket phenomenon whenever towing speed is slow. Bag net B-Type attached with dual flapper was shown as less variation in width of bag net and less escapement of anchovy.

• Journal of Life Science
• /
• v.26 no.1
• /
• pp.101-108
• /
• 2016

The aim of this study was to evaluate the relationships between the expression of Heat shock protein70 (HSP70), Raf-1 and Bcl-2-associated athanogene-1 (BAG1) protein in diffuse type gastric carcinoma and examine association of HSP70, Raf-1 and BAG1 expression with various clinic-pathological factors and survival. Heat shock protein70 is induced in the cells in response to various stress conditions, including carcinogens. Overexpression of heat shock protein 70 has been observed in many types of cancer. The proto-oncoprotein Raf is pivotal for mitogen-activated protein kinase (MAPK) signaling, and its aberrant activation has been implicated in multiple human cancers. Overexpression of BAG1 protein has been documented in some type of human cancer. BAG1 has been reported to interact with protein involved with a variety of signal pathway, and regulation of cell differentiation, survival and apoptosis. These interaction partners include HSP70 and Raf-1. The percentage of tumors exhibiting HSP70 positivity was significantly in cases of positive lymph node metastasis (64.9%) compared to cases without lymph node metastasis (35.1%, p=0.007). HS70 expression was correlated with pathological N-stage (p=0.006). Expression of BAG1 was detected in the majority of diffuse type gastric carcinoma tissues (71.7%), especially in younger patients (80% vs 52.6%, p=0.035). Furthermore BAG1 expression was correlated with tumor size (p=0.020). Raf-1 expression was found to be significantly associated with tumor size (p=0.005). The result indicate that HSP70 was significantly correlated the progression of diffuse type gastric cancer. Expression of BAG1 and Raf-1 may be used as diagnostic markers for gastric carcinoma.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.2
• /
• pp.179-190
• /
• 2000

The main object of this study was to investigate experimentally the characteristics of electrostatic cyclone-bag filter with upper tangential inlet in order to overcome the low collection efficiency for the submicron particle and high pressure drop which were main problems of general fabric bag filters. The experiment was carried out for the analysis of collection efficiency and pressure drop of electrostatic cyclone-bag filter comparing to those of fabric bag filter with various experimental parameters such as the inlet velocity(filtration velocity) and applied voltage etc. In the results the upper tangential inlet type showed higher collection efficiency for submicron particles below 2 ${\mu}{\textrm}{m}$ in diameter than that of center inlet and over 99.9% for overall collection efficiency. Pressure drop reduction ratios were shown as 40-50% for the applied voltage 0kV by centrifugal force and 70-90% for 20k V by the centrifuga and electrostatic force with the tangential inlet velocity (12-21m/s)

• Journal of Korean Academy of Nursing
• /
• v.21 no.1
• /
• pp.27-40
• /
• 1991

Perineal discomfort from episiotomy continues to be a problem for many postpartum women. The purposes of this study were to compare the effect of ice bag and heat lamp for the relief of perineal discomfort and to identify the sustaining time of each effect. Forty women took ice bag and heat lamp with random assignment of initial therapy. Women rated the degree of perineal discomfort before and after each therapy and at half-hour, tow-hour and four-hour intervals after each therapy. A discomfort scale, 18cm graphic rating scale, was used. The results of the study were as follows ; 1. The ice bag group showed significantly lower discomfort score than the heat lamp group at the half- hour and two - hour intervals after therapy. 2. The ice bag group showed significantly lower discomfort score for 4hrs after than before therapy, but the heat lamp group did not show significantly lower discomfort score. 3. Neither the type of episiotomy nor the previous experience of heat therapy influenced on the effect of ice bag relieving the perineal discomfort. Therefore ice bag was significantly mere effective in relieving perineal discomfort than heat lamp. Subjective responeses of patients who took both therapy were very favorable toward ice bag. I suggested that nurses should provide women with adequate information about the use of ice bag and encourage to apply ice bag instead of heat lamp after episiotomy in order to promote the relief of perineal discomfort and the healing of perineal wound.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.407-408
• /
• 2006

Passenger safety is one of the most important considerations in the purchase of an automobile. A curtain-type air bag is increasingly adapted in deluxe cars for protecting passengers from the danger of side clash. Inflator housing is a main part of the curtain-type air bag system for supplying high-pressure gases to pump up the air bag-curtain. Although the inflator housing is fundamental in designing a curtain-type air bag system, flow information on the inflator housing is very limited. In this study, we measured instantaneous velocity fields of a high-speed flow ejecting from the inflator housing using a dynamic PIV system. From the velocity field data measured at a high frame-rate, we evaluated the variation of the mass flow rate with time. From the instantaneous velocity fields of flow ejecting from the airbag inflator housing in the initial stage, we can see a flow pattern of broken shock wave front and its downward propagation. The flow ejecting from the inflator housing was found to have large velocity fluctuations and the maximum velocity was about 700m/s. The velocity of high-speed flow was decreased rapidly and the duration of high-speed flow over 400m/s was maintained only to 30ms. After 100ms, there was no perceptible flow.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.477-485
• /
• 2020

This study is a random allocation similar experimental study to compare and analyze the difference in BVM (Bag-Valve-Mask) ventilation volume according to the characteristics of the rescuer's hand and the type of mask using a standardized mannequin. To this end, the Basic Life Resuscitation Education Center of D University in gwangju. Recruiting 39 students who have completed the basic resuscitation course for emergency medical personnel and the Korean-style specialized cardiac rescue course, In addition to measuring the physical characteristics of the hand, the average amount of ventilation per minute using a bag-mask was measured and analyzed. As a result, the type of mask that was not most affected by the characteristics of the hand and provided adequate Minute Ventilation was the soft type (tube, silicone) mask. On the other hard (tube, silicone) masks were found to be unsuitable for general use as they were greatly affected by the characteristics of workers' hands. COVID-19 is currently increasing the risk of transmission to paramedics and patients. Considering this situation, the universal use of a semi-permanent hard-type mask, which is disadvantageous not only for preventing infection but also for proper ventilation, should be avoided. In addition to the ease of use, it should be actively utilized in the field by supplying a soft type mask that can provide stable ventilation even with 'predominance recognition' and proper ventilation.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1259-1260
• /
• 2006

Intensive technological research on the Dry-bag CIP equipment was carried out to improve the dimensional accuracy and the productivity. The rubber mold design technology using FEM simulation during pressing was introduced, in order to achieve higher dimensional preciseness, and criteria for the selection of the In-line type or Off-line type, were established based on the powder flowability index proposed by Carr. Based on these research results, high productivity Off-line Dry-bag CIP equipment, which can realize good dimensional accuracy with high productivity, was developed even for non-granulated powders with poor packing density.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.17-26
• /
• 2005

There are several problems in the commercial pound net in the heavy tide ; the breaking and loss of net, steeply variation of net shape and decreasing of fishing efficiency, etc. In order to solve these problems, we introduced method of added sinker used to coastal cultivating cage of Japan and investigated the possibility of application to the Korean pound net. The results are obtained as follows; 1. In case of the upperward flow with fish court net, tension of the frame line was increased about 10${\sim}$25% than that of prototype according to the added sinker from 1.3gf to 5.2gf. The tension of A-type and B-type was similar to the case of the prototype, the tension of C-type and D-type was increased about 10${\sim}$15% than that of prototype. 2. The variation of deformed angle of fish court net was from 0$^{\circ}$ to 70$^{\circ}$ and that of the slope net was from 0$^{\circ}$ to 64$^{\circ}$ and that of the second bag net was from 0$^{\circ}$ to 46$^{\circ}$ and the depth of the second bag net was increased about 10% when the added sinker was changed from 1.3gf to 5.2gf. The depth of the first bag net and the second bag net were decreased about 50% than that of initial depth. 3. For the deformed angle of fish court net according to the attached point of the added sinker, A-type and B-type were decreased about 25% and 10% than the prototype, respectively. C-type was similar to the case of the prototype and D-type was increased about 15% than that of the prototype. The depth of slope net became deep in turn of A-type, B-type, C-type and D-type. For the depth of the second bag net, A-type, B-type, C-type and D-type were increased about 10${\sim}$15% than that of prototype. The depth of the slope net was changed from 0$^{\circ}$ to 63$^{\circ}$ and that of the second bag net was changed from 0${\sim}$44$^{\circ}$ according to the increase of velocity. 4. The optimal weight of added sinker was about 2.6${\sim}$3.6gf and the optimal attached point of added sinker was the case of C-type and D-type.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.462-465
• /
• 2004

After 6 month of using, cracking of gas exhaustion bag cage of Type 304 stainless steel wire for Al melting reverberatory furnace was founded in welds. Analysis of crack causes in the wire were tested by electrochemical method, SEM images of structure and analysis of composition. Resulted from the test, it could be observed that cracks in the welds were a accelerated by formed polythionic acid on surface of bag cage in sensitized region of HAZ, tensile stress and using environment.