• IMMUNE NETWORK
• /
• 제6권4호
• /
• pp.185-191
• /
• 2006

Background: Based on outstanding progresses in animal experiments, vaccines for some human tumors have been developed. However, clinical effects of these vaccines have been far below than expected. This discrepancy might come from differences between animal models and human patients with respect to immunocompetency. The immune status of mice after tumor inoculation has not been well studied, which make us cautious in interpreting and applying the results from mice to human. We evaluated cell-mediated immune responses in mice after tumor cell inoculation. Methods: Mice were inoculated with TA3Ha, CT26, or 4T1. Delayed-type hypersensitivity (DTH) responses were induced 2-4 weeks after inoculation using 2,4-dinitro-1-fluorobenzene as an antigen. The relationships between the severity of DTH responses and the duration of tumor inoculation or the size of tumor mass were analyzed. Results: In T A3Ha groups, DTH response was elevated 2 weeks after inoculation, but depressed after 4 weeks, compared to the control group. When analyzed based on the sizes of tumor masses elicited, DTH responses were inversely related to the mass size, especially in those greater than 10 mm in diameter. In CT26 groups, while the duration after inoculation did not affect the severity of DTH responses, those with large mass showed depressed responses regardless the duration of inoculation. 4T1 cells grew so slowly that the size of tumor mass was small even 4 weeks after inoculation, and this group showed much higher DTH responses compared to that of tumor-free group. Conclusion: At least in an experimental setting where tumor model was induced by inoculating tumor cell lines into immunologically competent mice, the host immune response was elevated in early stage, and then depressed in late stage when the mass grew over a critical size.

• 한국식품영양과학회지
• /
• 제24권5호
• /
• pp.684-689
• /
• 1995

The molecular structure of rice starch was investigated using Korean rice[3 varieties of Japonica type and 3 varieties of Tongi type(Japonica-Indica breeding type)]. The λmax of iodine complex and inherent viscosity of Japonica type were higher than those of Tongil type. $\beta$-Amylolysis limit of the starches was not different between the two rice types. In the distribution of molecular weight of rice starch, the molecular size of amylose and amylopectin for Japonica type were smaller than those for Tongil type. The chain of rice starch distributed F1 of above DP 55, F2 of DP 40~50 and F3 of DP 15~20, and the ratio of F3 against F2 for Japonica type was higher than that of Tongil type. The results suggest that rice of Japonica and Tongil type was different molecular structure of starch.

• 대한치과기공학회지
• /
• 제23권2호
• /
• pp.151-160
• /
• 2002

The purpose of this study was to evaluate the influence of sprue joint form on castability in dental prosthetics. The researcher carried out experimental study according to the type was divided by sprue joint form. Therefore type A was made thicken than sprue diameter of type B and type C was made it conversely. The results were as follows: 1. In the order of castability, type C(87.8%) was first and then type A(87.0%) and type B(79.2%) was last. However there was no significant difference statistically. 2. If reservior was located at the correct position and in sufficient size, internal shrinkage porosity in the casting bodies were not generated in the type of all. 3. At the reservoir, internal shrinkage porosity was generated first in type A, followed by type Band type C in the order named. Although it gives no impact on casting body, porosity seems to appear the least when it's produced in the form of type C.

• 건축역사연구
• /
• 제29권2호
• /
• pp.53-62
• /
• 2020

This study focuses on the architectural changes of stele pavilion at the royal tombs of Joseon Dynasty. Throughout the survey on overall forty two stele pavilions, they were classified into basic type, expanded type, and 4-side corridor type. Basic type was usually used for general small stela, while expanded type was for extraordinarily large ones. 4-side corridor type, however, turned out to be used for both small and large stela and has appeared only during King Gojong period(高宗年間, 1863-1907). When it was first applied at Geonwolleung(健元陵) in 1870s, the purpose of 4-side corridor type seemed to stabilize the enlarged structure due to the size of the larger stele. Later, 4-side corridor type was repeated for small stela at Hongneung(洪陵) and Yureung(裕陵) in 1898 and 1904 respectively, to express higher dignity of Daehan Empire(大韓帝國). This type of plan continued to other pavilions in the center of Seoul such as Kinyeombijeon(紀念碑殿) and Seokgojeon(石鼓殿) that were built in 1903 with sophisticated proportion and multiple brackets. This architectural change implies that stele pavilion itself has become more significant than stele inside.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1346-1350
• /
• 2018

An electrode-evaporation technology on both the top and bottom sides of the bare vertical-type single chip separated from the traditional substrate by cooling, was developed for III-nitride vertical-type single chip LEDs with thick GaN epilayer. The post-process of the cooling step was followed by sorting the bare vertical-type single chip LEDs into the holes in a pocket-type shadow mask for deposition of the electrodes at the top and bottom sides of bare vertical-type single chip LEDs without the traditional substrate for electrode evaporation technology for vertical-type single chip LEDs. The variation in size of the hole between the designed shadow mask and the deposited electrodes owing to the use of the designed pocket-type shadow mask is investigated. Furthermore, the electrical and the optical properties of bare vertical-type single chip LEDs deposited with two different shapes of n-type electrodes using the pocket-type shadow mask are investigated to explore the possibility of the e-beam evaporation method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1658-1660
• /
• 2004

Use of higher voltage and higher capacity of power systems and their equipment is leading to an increase in the size of the entire system. In order to reduce the cost of constructing a substation, it is necessary to reduce the size of equipment. So, this paper described optical sensor, which exploited the electric and magnetic potentiometer to sense the measured voltage and current of medium voltage GIS. It can be used both in measurement and in protection relays as its well linearity, rapid response, broad dynamic range, wide frequency band, no magnetic saturation, small in volume, light weight, and saft in insulation.

• 한국통신학회논문지
• /
• 제31권11B호
• /
• pp.953-959
• /
• 2006

This paper provides optimum TCP/IP packet size that maximizes the throughput efficiency of ATM layer as a function of TCP/IP packet length for several values of channel BER over wireless ATM LAN links applying data link error control schemes to reduce error problems encountered in using wireless links. For TCP/IP delay-insensitive traffc requiring reliable delivery, it is necessary to adopt data link layer ARQ protocol. So ARQ error control schemes considered in this paper include GBN ARQ, SR ARQ and type-I Hybrid ARQ, which ARQ is needed, but FEC can be used to reduce the number of retransmissions. Especially adaptive type-I Hybrid ARQ scheme is necessary for a variable channel condition to make the physical layer as SONET-like as possible.

• 비파괴검사학회지
• /
• 제5권2호
• /
• pp.12-21
• /
• 1986

Generally, butt welds with plate thickness $30{\sim}40mm$ are welded with groove angle $40^{\circ},\;60^{\circ},\;70^{\circ}$, etc. In the detection of internal weld defects, oblique testing with single probe has been mainly used. But, recently, in acccordance with enlargement of welded structure, thick plate with 100-200mm are frequently required. Thus I-groove welding method was lately developed and often used. In this case, most frequently generated defects are the lack of weld penetration and incomplete fusion between base metal and welding material. If we would detect by oblique testing with single probe, detecting flaw is occassionally impossible or very underestimated. In this study, the limit for applying tandem method was studied in dise and band type flaws. The estimation of flaw size could be within 10% error compared to real flaws.

• 한국해양공학회지
• /
• 제22권5호
• /
• pp.138-141
• /
• 2008

This paper treats the development of a new type of deep draught semisubmersible offshore structural shape that has excellent heave motion response and less down-time. This new type of semisubmersible shape is characterized by heave dampers at each pontoon corner and appropriate column size adjustment to achieve the desired cancellation and resonance motion period. It was found that the final model had efficient workability, based on the wavescatter diagrams for the GoM and North Atlantic ocean, due to less heave motion, although the specific heave response at the 100 year return period wave condition in the North Atlantic was more or less increased.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.132-139
• /
• 1997

Spray characteristics of external mixing sonic twin-fluid atomization nozzles are investigated experimentally. Particle sizes are measured by the Fraunhofer diffraction method using the Malvern particle analyzer, and their radial distributions are obtained using the tomographical transformation technique. The spatial distribution of SMD shows that the drop size increases in the radial direction at a fixed liquid flow rate, and the distribution is getting uniform rapidly as the atomizing gas pressure increases. The SMD decreases as the liquid flow rate increases at a fixed GLR. It is found that the atomization efficiency of the flush type sonic nozzle is superior to that of protrusion type. The effect of laser beam diameter of the particle analyzer on the spatial SMD distribution is minor at present experimental conditions.