The women's apparel sizing system, currently used in the Korean industry, does not reflect measurement differences associated with varying body types and age. Forty five body meaqsurements were taken on 560 subjects, whoes eages ranged from 18-24. STatistical analysis of the data was coducted by using frequences, crosstables, correlation, oneway ANOVA, Regressio analysis. The results of this study were as follow. 1. Average height of women in their early 20's is 160cm, average bust girth 82cm, average hip girth 90cm and average drop 809. The correlation between height and grth items were low and the correlation of length items in the superior and inferior body were shown to bo high respectively. 2. The average Rhrer index is 1.28 and they ussually seem to be in the thin and standard body group. 3. body types were divided by differences between hip and bust sizes. N type(medium hip), A type (large hip), H type(small hip). A classification by body type showed that N type made up 58% while a type made up 24%. 4. The garment sizes for women in their early 20's were developed. 5. The new basic blocks and garment sizes for women in their early 20's were developed as follows : Bust girth (1/2) = 76N, 76A, 79A type($\frac{1}{2}$B+ 4cm) 79N type($\frac{1}{2}$B+ 3.5cm) 82N, 85N type ($\frac{1}{2}$B +3cm) Hip girth($\frac{1}{2}$) =N type($\frac{1}{2}$H + 2~2.5cm) Atype($\frac{1}{2}$H +1.5~2cm) Waist girth($\frac{1}{2}$)=$\frac{1}{2}$W + 2-3cm Back length =extimated measure -0.5cm Front length=76A, N (Back length + 2.2cm) 79A, N(back length +2.7cm) 82N(Back length +3.2cm) 85N(Back length + 3.7cm) Sleeve length=Sleeve length +3cm.
This study classifies somatotype from exact measurements according to the women somatotype with different drop value and isfunctional and has high body fitness. This study was preceded in the following process. Took 147 women in their 20's measurement directly and grasped the general body characteristic, and classified somatotype according to distribution of drop. Drop value is classified into Drop I, Drop II, and Drop III. Drop I is the difference value between bust line and waist line measurement. Drop II is the difference value between hip line and waist line measurement. Drop III is the difference value between hip line and bust line measurement. Suggested distribution of somatotype based on drop istribution. Classified somatotype into 4 types according to the mixture of combination of Drop I, II, and III. Comprehended the characteristics of somatotype based on basic statistical data. Type 1, M type, displays 40 % distribution that is most high distribution rate among four types and it is normal type which is similar to average value in size in the this study. Type 2, A type, displays 32.4% and it's a lower half of their body developed type with a flat busted and hippy. Type 3, X type, displays 19% and it's a healthy type with tall height, slender waist and curves of bust and hip lines. Type 4, H type, displays 8.6% and it's a biggest type in size which is busty, full hipped and nearly has no curves of body line.
Journal of the Korean Society of Clothing and Textiles
/
v.15
no.4
s.40
/
pp.341-349
/
1991
This study was done to provide basic data for clothing design and thus to contribute to the academic development of the clothing and textile area. The focus of this study was to characterize the somatotype based on each individual's lateral view. For this purpose, firstly, categorization of the subjects based on their lateral view and definition of each category, secondly, characterization of each somatotype, and thirdly, suggestion of the deterministic criteria of each category were complished. The subjects in this study were female college students of 18 to 26 year-old whose somatotypes were comparatively invariable after cessation of physical growth. The metrical items characterizing upper body lateral view were chosen. Data were collected through Anthropometry and Photometry and analyzed by Factor analysis. The results were as follows; 1. Each subject's side view contour was classified as straight type, lean-back type, bendforward type, and swayback according to its position to the relative plumb line. Straight type was defined as the type in which the plumb line passes through the lobe of the ear, the shoulder joint, and the mid abdominal region laterally. Lean-back type positioned the plumb line more posteriorly than straight type. Bend-forward type positioned the plumb line more anteriorly than straight type. Swayback positioned the plumb line at about the same line as straight type. And curvature of side view contur was more prominent in this type than in straight type. 2. Seven factors were figured out. The first factor was representing upperbody volume, and the second factor was representing size, the third factor was horizontal distance from lateral view representing size view contour. The fourth factor was front body length, the fifth factor was back body length. The sixth factor was shoulder length and shoulder width representing shoulder shape. The seventh factor was the bust shape.
This study aimed to present data for the development of a shoe which is suitable for plus-size men (BMI 25kg/m2 or higher) and to analyze the characteristics of each type of foot. The results of the study are as follows. To assess foot shape in relation to weight gain, participants were categorized into normal weight, overweight, and obese weight groups, according to their BMI indexes. Those in the normal weight group exhibited a smaller value than the overweight or obese weight group in all items. As a result of the cluster analysis, by type of foot, of the obese men category, men were classified into four BMI index groups: members of the type 1 group had a BMI index of 157 (18.4% of total sample), while for type 2 the figure was 213 (25.0% of sample), for type 3 it was 259 (30.4%), and for type 4 it stood at 224 (26.3% of total sample). Those from the type 1 group had thin ankles with narrow toes and flattened sides. Type 2 group members had thick ankles with well-developed outer feet and thick sides. Those within the type 3 group had medium-thick ankles with narrow feet but wide inner feet. Finally, those in the type 4 group had feet with a slanted side, as well as thick ankles, wide feet, and flat sides. Among these categories, the type 3 group members indicated the highest distribution.
This study analyzed the relationships among actual body types, perceived body types, body-image discrepancy(difference between perceived and ideal body), and body satisfaction, and their effects on jacket fit satisfaction at 17 body parts of women in their 20s. To apprehend the actual body type of subjects, total 18 items were measured according to the anthropometric method of the 6th anthropometric survey project. The relationship between body-image discrepancy and body satisfaction was correlated in all body parts. Body-image discrepancy and body satisfaction were more affected by perceived body size than actual body size. The fit satisfaction level of the jacket was found to be lower as the discrepancy between the body type and the ideal body type was recognized. As the waist girth, hip girth, armscye girth, and upper arm girth were smaller, the height was taller, bust girth and breast size were larger, these body sizes were considered as closer to the ideal body shape and the jacket fit of the area was more satisfied. When the perceived body sizes and the actual body sizes were compared, the women in their 20s tended to perceive their waist, abdomen, and hip as larger, their shoulder length and front/back interscye as longer, their breast size as smaller, and their waist height as lower than the actual size.
The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.
This study is intended to Mindori structure which is general private houses' structural type among traditional types and is a basic study to confirm structural characteristics of Hwatong connection which is general connection type of column-beam-cross beam. It is aimed to analyze how main member, column, such as size, figure, thickness of Sungetuk and Dugeup affect on structure. Following conclusions are drawn. 1. According to connection conditions, models with big coefficient of friction show stable hysteretic behavior until the angle rotation of member reaches 1/60 and models with small coefficient of friction show dramatical increase in load after the angle rotation of member reaches 1/24. After the angle rotation of member reaches 1/30, separation distance of members is identified physically and cracks are not observed. 2. Specimens with big coefficient of friction show similar inner force regardless of column size(except column size 150mm) and models with small coefficient of friction show increasing inner force as the column size increases. Specimens with same sectional area have similar inner force even though the column figures are different. The thickness of Sungetuk and Dugeup doesn't affect inner force greatly, however, when the thickness of Sungetuk is thin, it could lead to failure of structure as it breaks. 3. The bigger the size of column and the coefficient of friction are, the smaller Bending stiffness depreciation ratio is. 4. Energy Dissipation Efficiency differs from the coefficient of friction. When the coefficient of friction is big, square column shows bigger than round one and it is bigger when the thickness of Sungetuk and Dugeup is thicker. When the coefficient of friction is small, round column shows bigger than square one.
The health of feet is connected with individual's health and affects a man's activity. Shoes need to be designed to protect feet and to absorb the impact of land. In order to choose suitable shoes for feet, the foot size and shape must be considered, so it is essential to grasp the exact size and shape of the foot. This study aims to present fundamental data on shoes' easy order prototype development for choosing shoes of good wearing comfort, by classifying feet size and shape junior high school boys in the early adolescent period. The subject were 234 Korean junior high school boys age from 14 to 16 years old. The subjects were directly measured anthropometrically and indirectly analyzed photographically. 6 factors were extracted through factor analysis and those factors comprised 79.42% of total variance. The factors characterizing foot girth and width, foot length, foot height, foot shape around the fifth toes, angle of foot breadth and foot shape around the first toes. 3 clusters as their foot shape were categorized using 6 factor scores by cluster analysis. Type 1 was characterized by long large foot with deformed first toe. Type 2 had smaller in foot girth, width and length than other types and with deformed fifth toe. Type 3 had average size and high foot shape. Shoes prototype which is to be developed later on will be able to generate 2D flattening in the foot sole form. Therefore, it would be a great support in producing and choosing appropriate shoes if forms are classified by subdividing foot form classification and extract a factor which shows only the foot sole shape.
The health of feet is connected with individual's health and affects a man's activity. Shoes need to be designed to protect feet and to absorb the impact of land. In order to choose suitable shoes for feet, the foot size and shape must be considered, so it is essential to grasp the exact size and shape of the foot. This study aims to present fundamental data on shoes' easy order prototype development for choosing shoes of good wearing comfort, by classifying feet size and shape junior high school boys in the early adolescent period. The subject were 217 Korean junior high school girls in age from 14 to 16 years old. The subjects were directly measured anthropometrically and indirectly analyzed photographically. 7 factors were extracted through factor analysis and those factors comprised 78.59% of total variance. The factors were characterized foot length, foot girth and width, foot shape around the fifth toes, foot shape around the first toes, angle of foot breadth, foot height, and foot length of upper foot. 3 clusters as their foot shape were categorized using 7 factor scores by cluster analysis. Type 1 had smaller in foot girth, width and length than other types and with deformed fifth toe. Type 2 had average size and high foot shape. Type 3 was characterized by long large foot with deformed first toe. The results would be a great support in producing and choosing appropriate shoes if forms are classified by subdividing foot form classification and extract a factor which shows only the foot sole shape.
Two illite polytypes, 2M1 and 1Md, have been identified from the sericite deposits of the Bobae mine, Kimhae, Kyungsangnam-do. Each polytype has characteristic grain size, chemical composition, and occurrence. 2M1 illite occurs predominantly in the sericitic alteration zone, while 1Md illite occurs predominantly in the propylitic alteration zone, implying that the former was formed in the higher temperature than the latter. Illites can be subdivided into two types based on their crystal sizes;(1) the $\mu\textrm{m}$-sized illite which is below 0.01mm(100$\mu\textrm{m}$) in size and consists of 2M1 and 1Md type, (2) the mm-sized illite which is above 0.01mm in size and consists only of 2M1 type. Especially illite below 1$\mu\textrm{m}$ is premominantly of 1Md type. Therefore, it seems likely that illite crystal size is to some extent related to the polytype. XRD data show that there is no interstratified layer in illites regardless of the crystal size and polytype. Activity of muscovite component of the $\mu\textrm{m}$-sized illite is 0.843 while that of the mm-sized illite is 0.790. However, the latter is more similar to muscovite in crystal structure than the former is. The mm-sized illite has less Al and more Kthan the $\mu\textrm{m}$-sized illite. In both illites, Si contents show a positive relation to octahedral Mg. Fluid inclusion study and mineral association show that the formation temperature of illite is $270-330^{\circ}C$. The major chemical processes leading to the formation of sericitic deposit as well as the alteration zones are the leaching of SiO2 from the country rock and the addition of Al2O3 and K2O into the sericitic ores.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.