• 한국의류학회지
• /
• 제23권4호
• /
• pp.563-574
• /
• 1999

The purpose of this study was to provide basic information for obese boy's clothing construction that can reflect the characteristics of their bodies. The subjects for anthropometric measurements which were performed directly were obese boys of 9 to 11 year-old. To classify the somatotype and to analyze the characteristics of each somatotype 310 obese boys were examined. Data were analyzed by using multivariate method, By means of Ward the subjects were classified into 4 clusters according to the factor scores which were obtained from 6 factors providing the information of 54 items. 4 clusters were identified. 1) Type I was characterized by tall and obese type 2) Type II was characterized by short and small type 3) Type III was characterized by long and obese type of lower body. 4) Type IV was characterized by short and obese type.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1039-1046
• /
• 2002

To investigate the characteristics of orifice as an expansion devices, the experimental apparatus was made and experiments are being peformed using R22 and R290. The main idea of this control method of refrigerant flow rate with coupled orifices is to control the ON/OFF state of T and Ball type orifice corresponding to the subdivided region of thermal load. When system requires minimum thermal load, both T and Ball type orifices are closed, but refrigerant can flow through small hole of T type orifice. In regular thermal load, when ball type orifice is closed, T type orifice is opened and mass flow rate increase more than OFF state of T type orifice, due to large diameter. In maximum thermal load, both T and Ball type orifices are open and the much refrigerant can flow. The flow characteristics on T type orifice and parallel-combined orifice are obtained in the subdivided region of thermal load.

• Tribology and Lubricants
• /
• 제19권6호
• /
• pp.365-369
• /
• 2003

This paper presents an experiment of the characteristics of lubricating oils for refrigerating and air conditioning. We investgate influences of lubricating oils and additives on friction and wear by reciprocating type and pendulum type friction testers. The result shows that polyolesters have excellent friction characteristics and poor effect of additives. In contrast, polyvinylethers gave higher coefficient of friction, low wear amount and good effect of additives. We can see good relationship between the coefficients of friction in recipricating type and pendulum type friction testers.

• Tribology and Lubricants
• /
• 제35권2호
• /
• pp.139-147
• /
• 2019

This study investigates the effects of corrosion resistance characteristics of opponent materials in relative motion on the sliding wear behavior of mild carbon steel. Pin specimens made of mild carbon steel are tested at several sliding speeds against mating discs made of two types of alloyed steels, such as type D2 tool steel (STD11) and type 420 stainless steel (STS420J2), with different corrosion resistance characteristics in a pin-on-disc type sliding wear test machine. The results clearly show that the sliding wear behavior of mild carbon steel is influenced by the corrosion resistance characteristics of the mating disc materials at low sliding speeds. However, the sliding wear behavior at high sliding speeds is irrelevant to the characteristics because of the rising temperature. During the steady state wear period, the sliding wear rate of mild carbon steel against the type 420 stainless steel at a sliding speed of 0.5 m/s increases considerably unlike against the type D2 tool steel. This may be because the better corrosion resistance characteristics achieve a worse tribochemical reactivity. However, during the running-in wear period at low sliding speeds, the wear behavior of mild carbon steel is influenced by the microstructure after heat treatment of the mating disc materials rather than by their corrosion resistance characteristics.

• 국토계획
• /
• 제54권5호
• /
• pp.76-90
• /
• 2019

The purpose of this study is to analyze the survival characteristics of the restaurant business by trade area type (major and side street). By the increase of the unemployment rate, the new foundation of selt-employment type is increasing. However, due to high competition and economic recession, the sustainability of new foundation is not high. Therefore, in this study, survival analysis was performed considering the individual and commercial characteristics focused on the ordinary restaurants. The major findings are as follow. First, the characteristics of parcel unit and adjacent area have a significant effect on the survival. This means the micro-scopic spatial characteristics should be considered for survival in the location choice. Second, the regional economic characteristics in trade area have a significant effect on survival. Furthermore, these characteristics are different by the trade area type. Third. the development characteristics have a different effect on survival by the building usage and trade area type. Finally, regional economic characteristics have a significant effect on survival. These results are expected to be used as basic data for commercial location selection and trade area analysis system in the private and public sectors.

• 한국전기전자재료학회논문지
• /
• 제24권2호
• /
• pp.141-146
• /
• 2011

When the current of the superconducting element exceeds its critical current by the fault occurrence, the quench of the high-$T_C$ superconducting fault current limiter (HTSC) comprising the flux-lock type superconducting fault current limiter (SFCL) occurs. Simultaneously, the magnetic flux in the iron core induces the voltage in each coil, which contributes to limit the fault current. In this paper, the fault current limiting characteristics of the flux-lock type SFCL as well as the load voltage sag suppressing characteristics according to the flux-lock type SFCL's winding direction were investigated. To confirm the fault current limiting and the voltage sag suppressing characteristics of the this SFCL, the short-circuit tests for the simulated power system with the flux-lock type SFCL were carried out. The flux-lock type SFCL designed with the additive polarity winding was shown to perform more effective fault current limiting and load voltage sag suppressing operations through the fast quench occurrence right after the fault occurs and the fast recovery operation after the fault removes than the flux-lock type SFCL designed with the subtractive polarity winding.

• 대한가정학회지
• /
• 제26권1호
• /
• pp.97-108
• /
• 1988

The purpose of this study is to classify the type of the Korean document chest, mungab through the literature and market survey and to investigate the preference on characteristics of the mungab. It also attempts to find out the aesthetic perception of the type of mungab by using semantic differential scales. A pilot study was conducted to select the types and pictures of the mungab. Three types and six pictures of mungab were selected. Six hundred homemakers of middle and upper class residing in seoul area were selected for the survey and 449 among them were used for data analysis. Data were analyzed using the SPSS program. The major findings are as follows: 1) The esult of pilot test, the presentative characteristics of mungab were classified into naive type, unique type, and elaborate type. 2) it was found that the modernized style of traditional mungab was wood grain and the next one was Najonchiligi. In the characteristics of decoration which was symbolic pattern, Shi-Jang-Saeng was predominant. In wanting style when they buy, the modernized style of traditional Korean chest was predominant, too. 3) Young and low income group preferred modern style using transparent paint and Sa-Goon-Ja, letters in the symbolic patterns of decoration. Old and high income group preferred traditional style using splendid and expensive materials and Ship Jang Saeng in the symbolic decoration. 4) compared with types of mungab in aesthetic perception, modern style of the traditional mungab was evaluated more positively than traditional style. The young and low income group perceived the naive type and unique type positively, but the old and high income group perceived the elaborate type the most positively.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2078-2083
• /
• 2007

We have analyzed operating characteristics of transformer-type superconducting fault current limiter (SFCL) according to the serial or parallel connections of secondary coils with $YBa_2Cu_3O_7$ (YBCO) thin films. The turn ratio between the primary and secondary coils was 63:21. Transformer-type SFCL using a transformer with secondary winding of serial or parallel coils could reduce the unbalanced quench caused by differences of the critical current density between YBCO thin films. We found that transformer-type SFCL having serial or parallel connections induced simultaneous quench between the superconducting units. The limiting current in the transformer-type SFCL with a parallel connection was lowered to 30 % compared to the SFCL with a serial connection. In the meantime, when the currents generated in the superconducting units were similar, the voltage value in the parallel connection was 60 % as low as that in the serial connection. However, the voltage generated in the primary winding was some higher. In conclusion, we found that transformer-type SFCL with parallel connection of secondary coils was more effective in fault current limiting characteristics and in the reduction of the consumption power for superconducting units compared to those of the transformer-type SFCL with serial connection of secondary coils.

• Journal of Biosystems Engineering
• /
• 제37권5호
• /
• pp.279-286
• /
• 2012

Purpose: This study has been conducted to investigate the applicability of motion analysis of tillage blade for estimation of tillage characteristics of crank-type and rotary-type rotavators. Methods: The interrelation between tillage traces from motion analysis and field test results including rotavating depth, pulverizing ratio and inversion ratio at the same work conditions were analyzed for both crank-type and rotary-type rotavators. The work conditions include working speed of prime mover tractor and PTO speed of rotavators. For the motion analysis, joint conditions of main connecting component were specified considering the actual working mechanism of rotavator. Results: There were important correlations for the trend between motion analysis and field test results. Conclusions: Although further study is needed for applying motion analysis to estimate the accurate tillage related parameters such as rotavating depth, the soil pulverizing ratio and inversion ratio, it could be used to compare the tillage characteristics of various rotavators quickly and simply.

• 가족자원경영과 정책
• /
• 제18권2호
• /
• pp.75-102
• /
• 2014

This study classified the current work-life balance of full-time female paid workers and tested the typology by using the 2009 Korean Time Survey. The categorization demographic and psychological characteristics of women belonging to each type were comparatively analyzed. It was found that full-time female paid workers used an average of 435.7 minutes for work, 146.4 minutes for family, 104.5 minutes for leisure, and 17.7 minutes for growth. On the basis of times used in each area of work and life, individuals were classified into family-oriented type, work-leisure parallel type, work-oriented type, work-growth parallel type, and work-family parallel type. Psychological characteristics were examined by type. The work-oriented type women experienced feelings of lack of time and fatigue the most compared with women of other types. From examining the influence that the amount of time used in each area of work and life had on psychological characteristics, it was shown that the activity time relevant to leisure influenced psychological characteristics the most. Lastly, based on the limitations of this study, future assignments are discussed.