• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.431-436
• /
• 2008

The aim of the research is to find out facility types and chracteristics of the community center in Seoul. To do so, we picked up 40 examples of a densely populated and low resident district in Seoul and then analyzed to find out the typical types and characteristics. The result of this study can be summarized as follows : By classifying community center complexs largely into a complex type with similar facilities and a complex type with different facilities, 8 types were derived. Depending on 4 characteristics, such as spatial composition, entrance type, circulation form, and complex facility type, 12 types of community center complexes were derived, and the characteristics of each type are presented.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.1
• /
• pp.37-41
• /
• 2017

In this paper, the fault current limiting characteristics of the flux-lock type SFCL (superconducting fault current limiter) using magnetic application circuit were analyzed. The flux-lock type SFCL has the structure to install the magnetic application circuit, which can increase the resistance of HTSC ($high-T_C$ superconducting element comprising) the SFCL. To analyze the fault current limiting effect of the flux-lock type SFCL through the magnetic flux application circuit, the flux-lock type SFCL either with the magnetic flux circuit or without the magnetic flux circuit was constructed and the fault current limiting characteristics of the SFCL were compared each other through the short-circuit tests.

• Journal of ILASS-Korea
• /
• v.17 no.3
• /
• pp.158-163
• /
• 2012

This paper presents spray characteristics of piezo-driven type common-rail injector and comparisons to those of solenoid-driven type. Experiments were conducted to measure spray penetraion and SMD distributions using a spray visualization system and PDPA (phase Doppler particle analyzer) system. Injection conditions including injection pressure and energizing durations were varied in order to analyzing effects of injection conditions on spray characteristics. Furthermore, ambient pressures were increased for keeping ambient gas density close to in-cylinder pressure of diesel engine. Results showed that injection delay of piezo-driven type injector was much shorter than those of solenoid driven type and exhibited enhanced atomization performances.

• Journal of the Korean Society of Costume
• /
• v.53 no.6
• /
• pp.25-43
• /
• 2003

This study is to classify the types of Jikryung and to look into formative . periodic Characteristics. Results of analyzing can be described as follows. 1. Jikryung in the Chosun Era was classified according to whether it had a side hem. Jikryung which had side hem was reclassified according to the position of the side hem into inside, inside and outside and outside fold types and backward leaning type. Jikryung with no side hem was reclassified into types of closed and opened sides. 2. Concerning formative Characteristics, the type of inside fold was coexisted with the types of short front and long rear, the same front and rear, and narrow sleeves, bean chaff typed sleeves. Inside and outside fold type was used the type of short front and long rear, narrow sleeves. Outside fold type was used the type of same front and rear, bean chaff typed sleeves. Backward leaning type was used the same front and rear, wide sleeves. The types of closed and opened sides transformed from double Sup to single Sup and from narrow sleeves to bean chaff in its form and wide sleeves. 3. Concerning periodic Characteristics, the 1st period of Jikryung with side hem showed up the type of inside and outside fold, the 2nd period did the type of outside fold, The 3rd period did the type of backward leaning. Regarding Jikryung with no side hem, its 1st and 3rd periods saw the type of closed side, while its 2nd period coexisted with the types of closed and opened sides.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.160-170
• /
• 1997

The objective of this study is to investigate the atomization characteristics and the performance characteristics of a C. I. engine by using the changes of the injection nozzle type and the ultrasonic-energy-added system. In order to evaluate the effect of ultrasonic energy and of change of injection nozzle type in the performance characte- ristics of a diesel engine, measurements of droplet size of diesel fuel were carried out by using Malvern system. In all types of injection nozzles, SMD of the ultrasonic- energy -added diesel fuel was smaller than that of the conventional diesel fuel and the more injection pressure increased, the more SMD decreased. There was a small increase in SMD with the distance from injection nozzle under all conditions of the injection nozzle types. The minimum SMD was found in the injection nozzle of B type. In the diesel engine test, there were three results about the engine performance. Compared with the injection nozzle of A type, B type had excellent effects in the engine performance. The most excellent effects about the engine performance were obtained in the case of ultrasonic-energy-added diesel fuel. In addition, the torque diagram in the case of ultrasonic-energy-added diesel fuel was more stable and periodical than others.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.188-189
• /
• 2006

The flux-lock type superconducting fault current limiter (SFCL) has the attractive characteristics that can adjust the current limiting level by the turns ratio and the winding direction of two coils. To apply this type SFCL into power system, the analysis for the recovery characteristics of it together with the current limiting characteristic is needed. In this paper, the experiments of the current limiting and the recovery characteristics of the flux-lock type SFCL with YBCO thin film were performed. The recovery characteristics of the flux-lock type SFCL dependent on the winding direction of two coils were analyzed through the comparison with the resistive type SFCL.

• Journal of Families and Better Life
• /
• v.20 no.4
• /
• pp.149-164
• /
• 2002

The purpose of this study was to identify the types of social networks of urban housewives according to different network composition patterns and to analyze the structural and functional characteristics of identified types. The data used in this study were collected from 589 full-time housewives residing in Taejeon city. The major findings are as follows: 1) The social networks of housewives in urban nuclear families were classified into eight types: the kin network, the non-kin network, the kin-centered network, the friend-centered network, the neighbor-centered network, the associate-centered network, the parallel network, and the decentralized network. 2) The structual characteristics (size, density, homogeneity, duration, proximity, frequency, closeness, direction) varied according to the type. The kin network type and the non-kin network type showed extreme degrees in network characteristics. The parallel network type and the decentralized network type showed an average level of network characteristics. The kin-, friend-, neighbor-, and the associate-centered types showed network characteristics of an intermediate level between the single-category types and the decentralized type. 3) The average levels of function of social network types were different in only two(service support, interference) of the six function areas(emotional support, service support, material support, information support, social companionship support, interference). The average level of service support by the non-kin network type was higher than other types. The average level of interference by the kin-centered network type was higher than other types, and that of the neighbor-centered network type was lower than other types. On the other hand, the total amount of function performance of social network types was different in all function areas. The total amount of social support given by the decentralized network type was greater than the other types. The total amount of interference given by the non-kin network type was smaller than the other types.

• Journal of Child Welfare and Development
• /
• v.16 no.2
• /
• pp.1-23
• /
• 2018

The purpose of this study is to clarify the characteristics of school adolescents social capital by using Q methodology, to improve the adaptation of adolescents to school, and to contribute to the theory of social capital. As a result of the analysis, five types were derived. Type I was abundance, type II was family ceremony type, type III was discipline, type IV was exchange type, type V was trust type'. Based on the above five types, the characteristics of the social capital types of school adolescents are as follows: First, Type I includes social capital elements in various areas with abundant social capital elements relative to other types. Second, Type III is the weakest type of support among family members among the social capital elements in the family. Emotional interactions in parent - child relationship are cut off. Type II, however, is more emotional Support is the strongest type. Third, types II, IV, and V are parents love and affection for their children and they are very interested in children. Types III, IV, and V are parents It can be seen that it acts as a guide and an advisor. Finally, we can see that the five commonalities share a minimum parental interest in children.

• The KSFM Journal of Fluid Machinery
• /
• v.1 no.1 s.1
• /
• pp.81-89
• /
• 1998

In this study, the effects of the impeller shapes on the pump performances of the non-clogging and the screw-type centrifugal pumps are experimentally studied. The characteristics of total head, efficiency and power of the non-clogging pump increase as the number of vanes increases. The screw-type centrifugal pump with the linear-shape vane shows a little better performance than that of the screw-type centrifugal pump with the curved-shape vane. The differences in the characteristics of total head, efficiency and power are, however, insignificant. Therefore, it is advisable that, considering the convenience of pump manufacturing, the screw-type centrifugal pump with the linear-shape vane should be used. This study also compares the pump characteristics of the non-clogging pump and screw-type centrifugal pump. The characteristics of total head and efficiency of the non-clogging pump are better than those of the screw-type centrifugal pump. The screw-type centrifugal pump requires more shaft power than the non-clogging pump.

• 연구논문집
• /
• s.33
• /
• pp.53-65
• /
• 2003

Electrostatic micro-motors can be divided into three classes: (i) salient type side drive motor, (ii) radial gap type wobble motor, (iii) axial gap type wobble motor. The working mechanism, torque evaluation, fabrication, and operational characteristics of each micro motors are compared. It is proved that axial gap type wobble motor has the bigger generating torque than that of the other type. The gear ratio of wobble motors increases the driving torque at the cost of a decreasing angular speed and decreases the friction because of the rolling motion instead of sliding at the bearing. Techniques for characterizing micro-motors performance are presented.