• Korean Journal of Food Science and Technology
• /
• v.54 no.3
• /
• pp.313-319
• /
• 2022

This study was performed to analyze the nutritional contents (calories, carbohydrate, protein, fat, sugar, sodium and potassium) of home meal replacements (HMRs) and assess the total nutritional value of these meals. The energy, carbohydrate and sodium contents were highest in fried rice, and the percentage of the daily value (%DV) was also higher than 50%. In all HMRs, the sodium Index of Nutritional Qualities (INQs) was higher than one, but all sugar INQs were lower than one. Most of the energy contribution of the carbohydrates in fried rice, spaghetti and tteokbokki exceeded the recommended range, whereas protein and fat values were mostly under the recommended range in one-dish type lunchboxes and tteokbokki respectively. When applying the nutritional labeling requirements for food, a difference of 31% above or below the labeling standard indicates that continuous monitoring is needed. These results suggest that HMRs contain high levels of sodium and appear to be nutritionally imbalanced in part.

• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.280-289
• /
• 2022

Purpose: In this study, the characteristics of fire occurrence according to ignition heat sources such as operating equipment, cigarette/lighter fire, and flame/fire were analyzed. Method: One-way ANOVA and cross-analysis were used to analyze the characteristics of fire occurrence by verifying the difference between the ignition environment, fire damage status and scale, and cause of ignition according to the ignition heat source. Result: The fire occurrence characteristics were analyzed through As a result of the analysis, it was found that fires caused by operating devices occurred more frequently on weekdays than other ignition heat sources, and the number of victims and the number of victims were the highest, so mobilization of firefighting power and property damage were the greatest. The initial ignition was generated by electric and electronic devices, and the combustion was expanded by the synthetic resin. For fires caused by cigarette and lighter fires, the most fires occurred on Saturdays and Sundays, and the mobilization of the police force was more characteristic than the mobilization of the firefighting force. In particular, it was found that the initial ignition and combustion expansion were caused by paper, wood, and hay. Fires caused by sparks and sparks occurred most frequently on Saturdays and Sundays, and initial ignition and combustion expansion were found to be caused by paper, wood, and hay. In particular, it showed the characteristic that it occurred in the place farthest from the fire station. The common characteristic of all ignition heat sources was that the fire occurred most frequently in the afternoon time, and the fire type was predominantly the building structure fire, and only the ignition point was burned the most. Conclusion: In order to prevent fire and minimize damage, it is necessary to analyze the tendency of fire occurrence and to prepare appropriate preparations according to the fire occurrence factors. In order to analyze the characteristics of fire occurrence using public data in the future, it is necessary to standardize disaster data and to open and activate data.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.2
• /
• pp.95-110
• /
• 2022

This study was conducted to determine the extent to which climate change is expanding areas in which barley can be successfully cultivated. In 2019 and 2020, we collected data on areas that had requested certified seeds from the Korea Seed and Variety Service to determine potential cultivation areas. In addition, we surveyed the growth and yield of different types of barley in fields. Certified seeds of hulled and dehulled barley were requested by farmers across Korea from the Korea Seed and Variety Service in both years. Areas that were provided with certified seeds were considered potential barley cultivation areas. The varieties and use rates of certified seeds varied based on the barley type and region. For example, certified seeds of dehulled barley in 2019 and 2020 were not used in some areas, whereas in others, these seeds constituted 100% of the seeds sown for barley crops. In 2019 and 2020, the average sowing days in Korea were from October 17 to November 9 for dehulled barley, October 26 to November 13 for hulled barley, October 19 to November 5 for malting barley, and October 3 to November 1 for naked oats. Thus, the sowing days of the barley types varied depending on the area and year they were used. For example, in the case of hulled barley in Jeonnam, some farmers sowed until December 12. The yield per 10 a of barley cultivation was typically higher in the main production areas than in the cultivation limit areas. In extreme cases, harvest was impossible in some cultivation limited areas, such as Gangwon-do. Based on the current 20-year January minimum average temperature (JMAT) in Korea (2002-2021), climate change scenarios suggest that barley cultivation is feasible, provided that the minimum temperature in January is no lower than -10℃, -8℃, and -4℃ for hulled barley, dehulled barley, and for malting barley and naked oats, respectively. Additionally, cultivation of barley across South Korea seems feasible based on data on certified barley seeds by area. Although both JMAT and certified seed data suggest that barley cultivation across Korea is feasible, our survey results of barley growth and yield showed that harvest was impossible in certain cultivation areas, such as Gangwon-do. Therefore, climate change scenarios related to the cultivation limits of different barley types need to be re-estimated by factoring in survey data on the growth and yield of crops within those cultivation areas.

• Korean Journal of Environment and Ecology
• /
• v.35 no.6
• /
• pp.579-593
• /
• 2021

In order to understand the types of vegetation in warm temperate-climate zones, vegetation was investigated in several island areas in Jeollanam-do (Jindo, Wando, Gangjin, Goheung, and Yeosu). The evaluation standard for degraded level of warm temperate forests were proposed based on the importance percentage (IP) in canopy layer of the evergreen broad-leaf forests and the number of arboreal evergreen broad-leaf species. Through these measurements, the restoration types and techniques for each degraded level were estimated, and it is intended to be used in establishing restoration plans for the southwest coast island area. The vegetation was analyzed using the two-way indicator species analysis (TWINSPAN) method using survey data of 307 plots. As a result, it was divided into 8 communities, and the appearance characteristics of evergreen broad-leaf species were identified in each community. Community I was located on the lower slope at an altitude of 86.6 m, and Neolitsea sericea and Castanopsis sieboldii were dominant. Communities II and III were the vegetation types that appear on the coast below an altitude of 10.5 to 22.5 m, and Machilus thunbergii, Cinnamomum japonicum, N. sericea, and C. sieboldii were dominant. Communities IV and V were vegetation types that appeared in the lower and middle slops between the altitudes of 71.9 to 153.4m, and C. sieboldii was dominant. In community VI, the N. sericea was dominant in the lower and middle slops at an altitude of 166.9 m. The last communities VII and VIII were the vegetation types that appeared on the middle slop at an altitude of 187.8 to 246.2 m. Also, Quercus acuta and Q. salicina were present. In summary, the evergreen broad-leaf forests dominated by M. thunbergii, C. japonicum, and N. sericea appeared mainly in the coastal areas of the lowlands. The community of C. sieboldii was distributed higher inland than this community. The communities that appeared mainly in the inland highlands at levels above these two communities were Q. acuta and Q. salicina. The degraded level was classified as 0 to V, according to the IP of arboreal evergreen broad-leaf species and the number of arboreal evergreen broad-leaf species. According to the degraded level, the restoration types (preservation, induction, improvement, creation) and the restoration techniques were determined.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.345-358
• /
• 2021

This study focuses on the development of the liquid air production process that uses LNG (liquefied natural gas) cold energy which usually wasted during the regasification stage. The liquid air can be transported to the LNG exporter, and it can be utilized as the cold source to replace certain amount of refrigerant for the natural gas liquefaction. Therefore, the condition of the liquid air has to satisfy the available pressure of LNG storage tank. To satisfy pressure constraint of the membrane type LNG tank, proposed process is designed to produce liquid air at 1.3bar. In proposed process, the air is precooled by heat exchange with LNG and subcooled by nitrogen refrigeration cycle. When the amount of transported liquid air is as large as the capacity of the LNG carrier, it could be economical in terms of the transportation cost. In addition, larger liquid air can give more cold energy that can be used in natural gas liquefaction plant. To analyze the effect of the liquid air production amount, under the same LNG supply condition, the proposed process is simulated under 3 different air flow rate: 0.50 kg/s, 0.75 kg/s, 1.00 kg/s, correspond to Case1, Case2, and Case3, respectively. Each case was analyzed thermodynamically and economically. It shows a tendency that the more liquid air production, the more energy demanded per same mass of product as Case3 is 0.18kWh higher than Base case. In consequence the production cost per 1 kg liquid air in Case3 was $0.0172 higher. However, as liquid air production increases, the transportation cost per 1 kg liquid air has reduced by $0.0395. In terms of overall cost, Case 3 confirmed that liquid air can be produced and transported with $0.0223 less per kilogram than Base case.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.221-229
• /
• 2022

This study was aimed to investigate spatial and vertical characteristics of greenhouse environments according to the location of the environmental sensors, and to investigate the correlations between temperature, light intensity, and carbon dioxide (CO₂) concentration according to the type of greenhouse. Temperature, relative humidity (RH), CO₂, and light sensors were installed in the four-different vertical positions of the whole canopy as well as ground and roof space at the five spatial locations of the Venlo greenhouse. Also, correlations between temperature, light intensity, and CO₂ concentration in Venlo and semi-closed greenhouses were analyzed using the Curve Expert Professional program. The deviations among the spatial locations were larger in the CO₂ concentration than other environmental factors in the Venlo greenhouse. The average CO₂ concentration ranged from 465 to 761 µmol·mol^-1 with the highest value (646 µmol·mol^-1) at the Middle End (4ME) close to the main pipe (50Ø) of the liquefied CO₂ gas supply and lowest (436 µmol·mol^-1) at the Left Middle (5LM). The deviation among the vertical positions was greater in temperature and relative humidity than other environments. The time zone with the largest deviation in average temperature was 2 p.m. with the highest temperature (26.51℃) at the Upper Air (UA) and the lowest temperature (25.62℃) at the Lower Canopy (LC). The time zone with the largest deviation in average RH was 1 p.m. with the highest RH (76.90%) at the LC and the lowest RH (71.74%) at the UA. The highest average CO₂ concentration at each hour was Roof Air (RF) and Ground (GD). The coefficient of correlations between temperature, light intensity, and CO₂ concentration were 0.07 for semi-closed greenhouse and 0.66 for Venlo greenhouse. All the results indicate that while the CO₂ concentration in the greenhouse needs to be analyzed in the spatial locations, temperature and humidity needs to be analyzed in the vertical positions of canopy. The target CO₂ fertilization concentration for the semi-closed greenhouse with low ventilation rate should be different from that of general greenhouses.

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.477-490
• /
• 2022

Serious Accident Punishment Act(SAPA) went into effect as of Jan. 27, 2022. The subject of study was the worker of the nuclear medicine department and the investigation was aimed at identifying the present situation of their understanding on the issue in the here and now, which can be utilized as basic research for further study. The survey was conducted on 51 people of the worker in the nuclear medicine department. The general factors were classified by their gender, the scale of the hospitals, the period of career, and the detailed occupational categories. The conclusion was drawn, including 1 missing data in gender and 2 in the type of occupation. The targeted hospitals were tertiary hospital, university hospital, and general hospital which have nuclear medicine department in. The period of subjects' career was categorized by less than 3 years, 3 to 5 years, 5 to 10 years, and more than 10 years. The specific occupation was classified by in-vivo radiological technologist, radiation safety manager and others. The amount of pressure that the job entails was highest in the category of general hospital, the period of 3 to 5 years of job experience, and radiation safety manager each. The system of the code was well constructed in the category of general hospital, the period of less than 3-year career, and radiation safety manager, as they responded. The blood transmissible disease had the largest number of outbreak of accidents related to the serious industrial accident. In addition, the radiopharmaceutical dosing error had the highest number of outbreak of accidents related to the serious civil accident. Therefore, we need to improve SAPA, facility inspection, security of budget, security of professional manpower. It will help the stable use of radiation and ensure patient safety.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.43-58
• /
• 2008

This research was conducted to determine the alternative tool of chemical spray for rice cultivation using the unmanned helicopter(Yamaha, R-Max Type 2G-remote controlled system) at farmer's field in Korea. The unmanned helicopter tested was introduced form Japan. In Korea the application of chemicals by machine sprayer for pest management in rice cultivation has been ordinarily used at the farmer's level. However, it involved a relatively high cost and laborious for the small scale of cultivation per farm household. Farm population has been highly decreased to 7.5% in 2002 and the population is expected to rapidly reduce by 3.5% in 2012. In Japan, pest control depending on unmanned helicopter has been increased by leaps and bounds. This was due in part to the materialization of the low-cost production technology under agricultural policy and demand environmentally friendly farm products. The practicability of the unmanned helicopter in terms of super efficiency and effectiveness has been proven, and the farmers have understood that the unmanned helicopter is indispensable in the future farming system that they visualized. Also, the unmanned helicopter has been applied to rice, wheat, soybean, vegetables, fruit trees, pine trees for spraying chemicals and/or fertilizers in Japan Effect of disease control by unmanned helicopter was partially approved against rice blast and sheath blight. However, the result was not satisfactory due to the weather conditions and cultural practices. The spray density was also determined in this experiment at 0, 15, 30, and 60cm height from the paddy soil surface and there was 968 spots at 0cm, 1,560 spots at 15cm, 1,923 spots at 30cm, and 2,999 spots at 60cm height. However, no significant difference was found among the treatments. At the same time, there was no phytotoxicity observed under the chemical stray using this unmanned helicopter, nor the rice plant itself was damaged by the wind during the operation.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.119-127
• /
• 2002

This study was conducted to develop the heat exchanger by utilizing the heat energy of underground water(15℃), which might be used for cooling and heating system of the agricultural facilities. We developed the heat exchanger, parallel type plat fin tube made of Aluminum(Al 6063), which was named Aloo-Heat(No. of The registration design : 0247164, by Korean Intellectual property Office). The fin of exchanger was design of the granulated surface for minimizing fouling factor and dew forms, and also placed parallel to the tube in order to minimized the resistance of flows. 1. Aloo-heat was designed to have 0.03m for inside diameter, 0.036m for outside diameter of tube, 0.0012m for thickness of fin and 0.032m for length of plat fin. 2. t was also designed to have 1.5248m²/m for outside area of heat transfer, 0.0942m²/m for inside area contacting hot liquid, and the ratio (Ra) was 16.1869. 3. Efficiency of the fin was 93 percentage when fin length was 0.032m, and the fin thickness satisfied equation $\frac{h{\rho}}{k}$< 0.2 when it was 0.0012m. 4. According to the performance test of Aloo-heat, as the temperature and rate increased, the heating value also increased, heating value was 504kJ/h·m and 6,048kJ/h·m when it was 60℃, 10 𝑙/min and 80℃, 40 𝑙/min respectively. 5. The test of heating value was confident, because correlation value(R²) was 0.9898 for the temperature and 0.9721 for flow rate of hot liquid, respectively.

• Research in Plant Disease
• /
• v.29 no.1
• /
• pp.23-38
• /
• 2023

The fire blight caused by Erwinia amylovora (Ea) is a devastating disease of Rosaceae plants, including commercially important apple and pear trees. Since the first report in Korea in May 2015, it has been spreading to neighboring regions gradually. Host plants can be infected by pollinators like bees, rainfall accompanied by wind, and cultural practices such as pruning. Many studies have revealed that wild Rosaceae plants such as Cotoneaster spp., Crataegus spp., Pyracantha spp., Prunus spp., and Sorbus spp. can be reservoirs of Ea in nature. However, wild Rosaceae plants in Korea have not been examined yet whether they are susceptible to fire blight. Therefore, the susceptibility to fire blight was examined with 25 species in 10 genera of wild Rosaceae plants, which were collected during 2020-2022, by artificial inoculation. Bacterial suspension (10⁸ cfu/ml) of Ea type strain TS3128 was inoculated artificially in flowers, leaves, stems, and fruits of each plant species, and development of disease symptoms were monitored. Moreover, the presence of Ea bacteria from inoculated samples were checked by conventional polymerase chain reaction. Total 14 species of wild Rosaceae plants showed disease symptoms of fire blight, and Ea bacteria were detected inside of inoculated plant parts. These results suggest that wild Rosaceae plants growing nearby commercial apple and pear orchards in Korea can be Ea reservoirs, and thus they should be monitored regularly to minimize the damage by Ea infection and spreading.