• Journal of the Korean Statistical Society
• /
• 제8권1호
• /
• pp.23-36
• /
• 1979

In the multiple linear regression model a class of weighted least absolute error estimaters, which minimize the sum of weighted absolute residuals, is proposed. It is shown that the weighted least absolute error estimators with Wilcoxon scores are equivalent to the Koul's Wilcoxon type estimator. Therefore, the asymptotic efficiency of the proposed estimator with Wilcoxon scores relative to the least squares estimator is the same as the Pitman efficiency of the Wilcoxon test relative to the Student's t-test. To find the estimates the iterative weighted least squares method suggested by Schlossmacher is applicable.

• Journal of applied mathematics & informatics
• /
• 제23권1_2호
• /
• pp.571-579
• /
• 2007

Finite difference schemes are considered for a generalization of the Cahn-Hilliard equation with Neumann boundary conditions and the Kuramoto-Sivashinsky equation with a periodic boundary condition, which is of the type $ut+\frac{{\partial}^2} {{\partial}x^2}\;g\;(u,\;u_x,\;u_{xx})=f(u,\;u_x,\;u_{xx})$. Stability and $L^{\infty}$ error estimates of approximate solutions for the corresponding schemes are obtained using the extended Lax-Richtmyer equivalence theorem.

• 한국보건간호학회지
• /
• 제16권1호
• /
• pp.176-189
• /
• 2002

The purpose of this study were to illustrate the various medication error types and causes and identified to related drugs to provide basic data for preventing nurses' medication error by analysing 73 cases of AJN 'medication Error' column(1993, Oct -2000, Nov). Nurses' types of medication error were classified into 7 types. The most frequent error types are wrong medication$(21.9\%)$ and the wrong dose$(21.9\%)$ together. The others are wrong $time(4.1\%)$, $omission(2.7\%)$, mechanical $error(2.7\%)$, incorrect IV $rate(1.4\%)$. wrong route $administration(1.4\%)$ in order. Nurses' causes of medication error were 9 kinds. The most frequent type is confusing between similar drug shape, color, size, name, injection devices and patient's $name(43.9\%)$ and the others are lack of knowledge about $drugs(26.8\%),\; slips(7.3\%),\; miscalculating\;dose(4.9\%)$, incorrect adjusts $devices(4.9\%)$, difficulty to read or illegible decimal $point(4.9\%),$ $abbreviation(2.4\%)$, fatigue with $overwork(2.4\%)$ and no communication with $patient(2.4\%)$ in order. Related drugs with medication error are as follows. - dose unit(IU. minims. mcg/min. mEq) : Heparin. insulin. synthetic calcitonin, some enzymes and hormones, vitamins, some antibiotics, tuberculin injection. MgSO4 injection. nitroglycerin - similar size, color and shape drug : $0.9\%$ N/S and acetic acid $0.25\%$ for irrigation. premixed 2mg lidocaine sol. and $0.9\%$ N/S, gentamycin 20mg/2mL for children and 80mg/2mL for adult, dextroamphetamine 5mg and 10mg capsule. sedatives chloral hydrate 250mg/5mL and 500mg/5mL - similar name :Aredia(pamidronate disodium) and Adriamycin(doxorubicin), Lamictal (lamotrigine) and Lamisil 250mg. Elderpryl and enalapril, cefotaxime and cefoxitin, carboplatin and cisplatin, sumatriptan and zolmitriptan, Celebrex and Celexa, Humulin and Humalog, Percodan and Percocet, Diabeta and Diabinese, Epivir and Retrovir, Xanax(alprazolam) and Zantac(ranitidine) - decimal point : low molecular weight warfarin, methotrexate - unfamiliar drug uses of familiar drug ; methotrexate. droperidol, imipramine, propranolol - number of drug name(misleading chemical name) : 6-thioguanine, 6-mercaptopurine, 5-fluorouracil - type of administration route : Oxycodone(OxyContin). - administration time : acarbose(Precose). - injection way (Z-track method): hydroxyzine - epidural cathether : LMWHs(enoxaparin, dalteparin), - ADD Vantage self contained delivery system : ceftriaxone(Rocephin)

• 한국안전학회지
• /
• 제23권4호
• /
• pp.13-18
• /
• 2008

This study deals with finish roll forming by forced displacement can be conceived as a method of eliminating errors in conventional form rolling under constant loads. This method produces a high-precision tooth profile by low-speed form rolling when a high rigid screw or cam is used at the pressurized section. Tooth profile is decided in the beginning of roll forming and ${\delta}_{max}$ mainly increases if the number of roll forming process is increased. Gear class is improved by one or two class after roll forming if the gear has convex type error and pressure angle error in KS 4 class. If the gear have concave type error and pressure angle error and pressure angle error, gear class is not improved in theory, but improved a little in practice. In the finishing roll forming, it inevitably yields both the concaving of tooth profile and plastic deflection of addendum of teeth. Experiments show that the concaving and the plastic deflection are successfully reduced, the accuracy of tooth profile reaches to KS 0 class.

• 한국항해학회지
• /
• 제3권1호
• /
• pp.19-28
• /
• 1979

There are two different assertions on the rolling error in the solid-controlled gyro compass which contains two rotors in its inner gyro sphere. One assertion is that there is a rolling error and the other is that there is no rolling error. This paper examines the rolling error caused by the centrifugal force by the experiment to reveal that the first assertionis reasonable, and it also attempts to explain qualitatively how the rolling error occurs. The Hokushin-Plath gyro compass is chosen as a model. The rolling error is examined by the swing test in various periods. From the tests, the following results are obtained. As long as the swing is continued under the fixed condition of the ship's heading, the swinging period and the amplitude, no error appears. In case the gyro compass is affected by the swingings except those of the cardinal planes, the error starts to appear only after the swing is finished and it is increasing slowly. It takes about 20 minutes for the error to reach its maximum value. The type of this error is a quadrantal one which makes the ship's heading high in the first and third quarters and low in the second and fourth quarters. But in each case the experimental maximum error is greater than the theorectical one.

• 응용통계연구
• /
• 제22권5호
• /
• pp.1085-1096
• /
• 2009

환자-대조군 연관성 연구에서 후보 유전자와 질병이 연관되어 있지 않더라도 인구집단 층화로 인해 가짜 연관성이 발생할 수도 있다. 본 연구에서는 일배체형에 기초한 환자-대조군 연관성 연구에서 인구집단 층화로 인한 가짜 연관성을 해결하기 위한 방법으로, Zaykin 등 (2002)이 제안한 일배체형 경향성 모형에 인구집단 층화에 대한 정보를 추가하고자 한다. Zaykin 등 (2002)의 모형과 제안한 모형에 기초한 일배체형의 유의성 검정에서 인구집단 층화와 인구집단에 대한 관측 오차가 제1종 오류율에 미치는 영향을 모의실험을 통해 살펴보았다. 인구집단이 층화되어 있지만 각 개체가 속한 인구집단을 정확히 알 수 있을 때, Zaykin 등 (2002)의 모형에 기초한 검정은 제1종 오류율을 잘 조절하지 못했지만 본 연구에서 제안한 모형에 기초한 검정은 제1종 오류율을 잘 조절하는 것으로 나타났다. 그러나 인구집단이 층화되어 있고 관측 오차가 존재하면 제안한 모형에 기초한 검정도 제1종 오류율을 조절하지 못하고 명목 유의수준보다 큰 값을 갖는 것으로 나타났다. 따라서 단일염기다형성에 기초한 환자-대조군 연관성 연구와 마찬가지로 일배체형에 기초한 환자-대조군 연관성 연구에서도 인구집단 층화에 대한 정보를 갖고 있다할지라도 그 속에 관측 오차가 존재하면 위양성을 피하기 어렵다는 것을 알 수 있었다.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.155-161
• /
• 2013

PURPOSES: This study is to develop a road traffic sign recognition and automatic positioning for road facility management. METHODS: In this study, we installed the GPS, IMU, DMI, camera, laser sensor on the van and surveyed the car position, fore-sight image, point cloud of traffic signs. To insert automatic position of traffic sign, the automatic traffic sign recognition S/W developed and it can log the traffic sign type and approximate position, this study suggests a methodology to transform the laser point-cloud to the map coordinate system with the 3D axis rotation algorithm. RESULTS: Result show that on a clear day, traffic sign recognition ratio is 92.98%, and on cloudy day recognition ratio is 80.58%. To insert exact traffic sign position. This study examined the point difference with the road surveying results. The result RMSE is 0.227m and average is 1.51m which is the GPS positioning error. Including these error we can insert the traffic sign position within 1.51m CONCLUSIONS: As a result of this study, we can automatically survey the traffic sign type, position data of the traffic sign position error and analysis the road safety, speed limit consistency, which can be used in traffic sign DB.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제34권4호
• /
• pp.236-241
• /
• 2023

Objectives: According to the 10th revision of the International Classification of Diseases, the main categories of tic disorders (F95.0, F95.1, and F95.2) follow a diagnostic hierarchy based on the duration and diversity of tic symptoms. The present study investigated the use of this diagnostic hierarchy in real-world clinical practice. Methods: Based on the National Health Insurance Service-National Health Information Database, the diagnosis of transient tic disorder (F95.0) made after a diagnosis of chronic motor or vocal tic disorder (F95.1) or Tourette's syndrome (F95.2) and diagnosis of chronic motor or vocal tic disorder (F95.1) made after a diagnosis of Tourette's syndrome (F95.2) were referred to as type A errors. The diagnosis of transient tic disorder (F95.0) repeated after a period of >12 months was referred to as type B error. Demographic and clinical differences according to the diagnostic error types were analyzed using analysis of variance, Student's t-tests, and chi-squared tests. Results: Most participants (96.5%) were without errors in the diagnosis of tic disorders. Higher proportions of males (p=0.005) and antipsychotic prescriptions (p<0.001) were observed in patients with type A or B diagnostic errors. A higher proportion of health insurance holders was observed among those with type A errors (p=0.027). Conclusion: Errors were absent in majority of the tic diagnoses in real-world clinical practice in terms of the diagnostic hierarchy.

• Industrial Engineering and Management Systems
• /
• 제14권1호
• /
• pp.22-31
• /
• 2015

In this paper, a two-stage hybrid flow shop problem is considered. Specifically, there exist identical parallel machines at stage 1 and two dedicated machines at stage 2, and the objective of the problem is to minimize makespan. After being processed by any machine at stage 1, a job must be processed by a specific machine at stage 2 depending on the job type, and one type of jobs can have different processing times on each machine. First, we introduce the problem and establish complexity of several variations of the problem. For some special cases, we develop optimal polynomial time solution procedures. Then, we establish some simple lower bounds for the problem. In order to solve this NP-hard problem, three heuristics based on simple rules such as the Johnson's rule and the LPT (Longest Processing Time first) rule are developed. For each of the heuristics, we provide some theoretical analysis and find some worst case bound on relative error. Finally, we empirically evaluate the heuristics.

• 한국토양비료학회지
• /
• 제42권2호
• /
• pp.110-116
• /
• 2009

토양의 용적수분 함량을 현장에서 측정할 수 있어 토양 내 물 이동이나 관개관리에 효과적으로 이용할 수 있는 6종의 토양수분 센서에 대한 검정을 실시했다. TDR형태의 센서가 2종으로 토양단면측정용인 TRIME과 탐침형태인 Mini-TRASE이었으며, 4종은 FDR 형태의 센서로 토양단면 측정용인 EasyAG, EnviroSCAN, PR-1과 탐침형태의 WET-1 센서였다. 코어로 측정한 용적수분함량과 비교한 결과 TRIME은 1차 선형식의 관계에서 코어측정값과 약 2.4%의 오차를 나타냈고, Mini-TRASE는 코어 용적 수분함량과 약 1.4%의 오차를 나타냈으며, 이 오차는 실험에 사용했던 7종의 센서들 중에서 가장 작은 값이었다. EasyAG는 SF로 분석했을 때는 코어측정값과 약 2.6%의 오차를 나타냈고, 센서로 측정한 토양 수분 함량을 코어수분함량과 직접적으로 비교했을 때도 역시 약 2.6%의 오차를 나타냈다. EnviroSCAN은 SF로 분석했을 때는 코어측정값과 약 2.8%의 오차를 나타냈고, 센서로 측정한 토양수분 함량을 코어수분 함량과 직접적으로 비교했을 때는 2.6%의 오차를 나타냈다. WET-1은 센서로 측정한 값과 코어로 실측한 값 사이에 약 2.0%의 오차가 있음을 보여주고 있으며, 이것은 검정에 사용했던 FDR 센서들 중에서는 가장 작은 값이었다. PR-1은 측정시 access 튜브 내에서 방향을 조금씩 바꿀 때마다 측정값이 달리 나오는 경우가 많아 수분함량 측정횟수가 많지 않았으나 실측값과 약 4.7%의 오차를 보였다. 결론적으로 센서의 정확성을 검정하기 위해 사용된 6종의 센서 중 PR-1은 현장 측정에 문제가 있을 것으로 여겨진다.