• Macromolecular Research
• /
• 제9권1호
• /
• pp.51-65
• /
• 2001

Two-stage emulsion polymerizations of hydrophobic monomers on hydrophilic seed polymer particles were carried out to make core-shell composite particles. It was found that the loci of polymerization in the second stage were the surface layer of the hydrophilic seed latex particles, and that it has resulted in the formation of either eccentric core-shell particles with the core exposed to the aqueous phase or aggregated nonspherical composite particles with the shell attached on the seed surface as many small separated particles. The driving force of these phenomena is related to the gain in free energy of the system in going from the hydrophobic polymer-water interface to hydrophilic polymer-water interface. Thermodynamic analysis of the present polymerization system, which was based on spreading coefficients, supported the likely occurrence of such nonspherical particles due to the combined effects of interfacial free energies and phase separation between the two polymer phases. A hypothetical pathway was proposed to prepare hydrophilic core-hydrophobic shell composite latex particles, which is based on the concept of opposing driving and resistance forces for the phase migration. It was found that the viscosity of the monomer-swollen polymer phase played important role in the formation of particle morphology.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.91-108
• /
• 2000

Most of cervical abrasion and erosion lesions show gingival margin where the cavosurface angle is on cementum or dentin. Composite resin restoration of cervical lesion shrink toward enamel margin due to polymerization contraction. This shrinkage has clinical problem such as microleakage and secondary caries. Several methods to diminish contraction stress of composite resin restoration, such as modifying cavity form and building up restorations in several increments have been attempted. The purpose of this study was to compare polymerization contraction stress of composite resin in Class V cavity subjected to cavity forms and placement methods. In this study, finite element model of 5 types of Class V cavity was developed on computer tomogram of maxillary central incisor. The types are : 1) Box cavity 2) Box cavity with incisal bevel 3) V shape cavity 4) V shape cavity with incisal bevel 5) Saucer shape cavity. The placement methods are 1) Incisal first oblique incremental curing 2) Bulk curing. An FEM based program for light activated polymerization is not available. For simulation of curing dynamics, time dependent transient thermal conduction analysis was conducted on each cavity and each placement method. For simulation of polymerization shrinkage, thermal stress analysis was performed with each cavity and each placement method. The time-temperature dependent volume shrinkage rate, elastic modulus, and Poisson's ratio were determined in thermal conduction data. The results were as follows : 1. With all five Class V cavifies, the highest Von Mises stress at the composite-tooth interface occurred at gingival margin. 2. With box cavity, V shape cavity and saucer cavity, Von Mises stress at gingival margin of V shape cavity was lower than the others. And that of box cavity was lower than that of saucer cavity. 3. Preparing bevel at incisal cavosurface margin decreased the rate of stress development in early polymerization stage. 4. Preparing bevel at incisal cavosurface margin of V shape cavity increased the Von Mises stress at gingival margin, but decreased at incisal margin. 5. At incisal margin, stress development by bulk curing method was rapid at early stage. Stress development by first increment of incremental curing method was also rapid but lower than that by bulk curing method, however after second increment curing final stress was the same for two placement methods. 6. At gingival margin, stress development by incremental curing method was suddenly rapid at early stage of second increment curing, but final stress was the same for two placement methods.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.825-827
• /
• 2002

The polymer encapsulation of white inorganic $TiO_2$ pigment particles was prepared by a two stage dispersion polymerization technique for applications in electrophoretic displays (EPDs). In order to give functionality for inorganic pigment particles in the EPD, we have investigated the density of the polymer encapsulated $TiO_2$ particles. The average density of the polymer encapsulated $TiO_2$ particles was 2.2 at 25$^{\circ}C$. The average density of the polymer encapsulated $TiO_2$ particles is suitable to 1.7, due to density matching with suspending media. Therefore, we will attempt density compatibility of dispersion polymerization technique for encapsulation of $TiO_2$ particles in suspending media.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.180-187
• /
• 2004

The miniaturization technologies are perceived as potential key technologies of the future. They will bring about completely different ways in which people and machines interact with the physical world. However, at the present time, the primary technologies used fur miniaturization are dependent on the microelectronic fabrication techniques. The principal shortcomings associated with such techniques are related to the inability of to produce arbitrary three-dimensional features not only in electronics but also in a wide range of metallic materials. In this paper, a ultramicro-stereolithography system assisted with a femto-second laser was developed to fabricate the arbitrary three-dimensional nano/micro-scaled features. In the developed process, a femto-second laser is projected according to CAD data on a photosensitive monomer resin, it induces polymerization of the liquid resin. After the polymerization, a droplet of ethanol is dropped to remove the liquid resin and then the polymerized nano-scaled features only remain. By a newly developed process, miniature devices for an extremely wide range of applications would become a technologically feasible reality. Some of nano/micro-scaled features as examples were fabricated to prove the usefulness of this study at the fundamental stage.

• 멤브레인
• /
• 제23권3호
• /
• pp.220-225
• /
• 2013

친수성 단량체를 polyvinylidene fluoride (PVDF) 분리막 표면에 열중합으로 lamination하여 분리막을 친수화하였다. 친수화 처리 후 접촉각은 $95^{\circ}$에서 $55^{\circ}$까지 감소하였고 수투과량은 10배 이상 증가하였으며 bovine serum albumin (BSA) 흡착량은 1/4 수준으로 감소하였다. 열중합 공정에서 각 공정변수별 영향을 조사하였고 이를 최적화하였다. 단량체 중 dimethyl oxobuthyl acrylamide (DOAA)가 친수성이 높아 다른 단량체에 비하여 친수화 효과가 우수하였다. 단량체의 농도가 증가함에 따라 성능이 향상되었으나 30 wt% 이상의 경우 homopolymerization을 유발하여 성능을 저하시켰다. 개시제로 사용되었던 azobis (isobutyronitrile)(AIBN)의 활성 온도 범위가 benzoyl peroxide (BPO)의 활성온도 범위보다 넓기 때문에 높은 친수화 효율을 나타내었다. 개시제를 먼저 도포시켜주고 단량체를 나중에 첨가하는 2단계 lamination 방식이 일괄 공급하는 1단계 방식보다 친수화도는 크게 향상됐지만 pore blocking현상이 나타나면서 순수투과도는 매우 감소하였다.

• 설비공학논문집
• /
• 제27권10호
• /
• pp.552-557
• /
• 2015

The nanostereolithography process using a femtosecond laser has been shown to have strong merits for the direct fabrication of 2D/3D micro structures. In addition, a femtosecond laser provides efficient tools for precise micromachining owing to the advantages of a small and feeble heat effect zone. In this paper, we report an effective fabrication process of 3D micro optical and fluidic devices using nanostereolithography process composed of a dual stage system. Process conditions for additive and subtractive fabrication are examined. The Piezo stage scanning system is used for 3D micro-fabrication in unit area of sub-mm scale, and the motor stage is employed in fabrication on the scale of several mm. The misalignment between the pizeo- and motor- stages is revised through rotational transformation of CAD data in the unit domain. Here, the effectiveness of the proposed process is demonstrated through examples using 3D optical and microfluidic structures.

• 폴리머
• /
• 제25권5호
• /
• pp.617-624
• /
• 2001

음이온계 유화제를 사용하여 monomer pre-emulsion을 제조한 다음 ammonium persulfate를 개시제로 하여 단계 중합법에 의해 새로운 입자의 생성이 적고 중합 과정에서 안정성이 우수한 poly(methyl methacrylate)(PMMA)/polystyrene (PSt) 라텍스를 제조하였다. 본 연구에서는 shell 중합시에 새로운 입자의 생성이 적고 중합 중 안정성이 우수한 라텍스를 제조하기 위해 개시제농도, 유화제농도, 중합온도가 PMMA/PSt와 PSt/PMMA의 core-shell 구조에 미치는 영향을 알아보았다. 중합한 라텍스를 입도분석기 (particle size analyzer: PSA) 및 투과전자현미경(transmission electron microscope; TEM)을 이용하여 실제 입자측정과 입자형태 특성을 확인하였으며 시차주사열량계 (differential scanning calorimeter, DSC)를 이용하여 유리전이온도($T_g$)의 측정, 필름 조막성 (minimum film formation temperature: MFFT), NaOH 첨가에 의한 가수 분해에 따르는 pH를 측정하여 core-shell의 또 다른 특성을 확인하였다.

• The Journal of Advanced Prosthodontics
• /
• 제2권3호
• /
• pp.102-105
• /
• 2010

PURPOSE. The aims of this study were to suggest a method of fabrication of the record base using a light-polymerized resin by applying the two-phase fabrication method for the improvement of the fit of the record base and to compare the degree of fit according to the separation site. MATERIALS AND METHODS. In the edentulous cast of maxilla, four test groups were considered. In the first, second, third, and fourth test groups (n = 12 in each group) the separation was done at 0, 5, 10, and 15 mm, respectively below the alveolar crest along the palatal plane. For the control group, the record base was made without separating the two sections. The light-body silicone material was injected into the fitting surface of the record base. It was then placed onto the cast and finger pressure was applied to stabilize it in a seated position followed by immediate placement onto the universal test device. Finally, the mass of the impression material was measured after it was removed. ANOVA was performed using the SAS program. For the post-hoc test, the Wilcoxon Rank-Sum test and the Tukey-Kramer HSD test were performed ($\alpha$ = 0.05). RESULTS. The control group and Group 3, 4 showed significant differences. The Group 3 and 4 showed significantly smaller inside gaps than the control group which was not made with the two-phase fabrication method. CONCLUSION. The two-stage polymerized technique can improve the fit of the denture base particularly when the separation was made at 10 to 15 mm from the alveolar crest.

• KSBB Journal
• /
• 제14권4호
• /
• pp.422-428
• /
• 1999

Alcaligenes latus 유래의 phbC 유전자를 A. eutrophus에 재도입시킨 형질전환균주를 이용하여 높은 4HB 몰분율을 갖는 P(3HB-4HB)의 고농도 생산을 시도하였다. 형질전환균주는 총균체량, P(3HB-4HB) 농도, 그리고 축적률에서 모균주에 비해 다소 증가한 반면 P(3HB-4HB)내의 4HB 몰분율은 23.5 mol%로 모균주의 12.3 mol%에 비해 현저히 증가하였다. 이는 phbC유전자의 증폭으로 인해 해당과정에서 생성된 3HB와 전구물질인 ${\gamma}$-butyrolacton에서 전환된 4HB의 중합반응이 촉진되기 때문으로 사료된다. 또한 ${\gamma}$-butyrolacton의 농도 $Mg^{2-}$ 이온, 그리고 citrate 첨가량이 P(3HB-4HB)의 농도, 축적률, 그리고 4HB 몰분율에 미치는 영향을 검토하였다. P(3HB-4HB)내의 4HB 몰분율을 증대시키기 위하여 일반적으로 사용되는 2단계 배양법을 변형시켜 ${\gamma}$-butyrolacton과 citrate의 첨가시기를 늦춘 2단계 배양법을 활용하여 P(3HB-4HB)내의 4HB 몰분율을 61.0 mol%로 증가시킬 수 있었다. 또한 ${\gamma}$-butyrolacton의 첨가량을 조절하여 P(3HB-4HB)내의 4HB 몰분율이 92.0 mol%에 이르는 homopolymeric P(4HB)를 생산할 수 있었으며, 그 구조를 $^1$H-NMR을 통해 확인하였다.

• 한국미생물·생명공학회지
• /
• 제40권3호
• /
• pp.274-277
• /
• 2012

본 연구에서는 다제내성을 보이는 인체 병원균의 하나인 S. aureus에서 유래된 FtsZ 단백질의 유전자를 클로닝하고 대장균에 형질전환하여 재조합 단백질을 만들고, in vitro 상에서 폴리머 형성 활성을 측정하였다. Bradford 방법을 이용하여 SA FtsZ단백질의 농도를 측정한 후, SA FtsZ단백질의 폴리머 형성 활성을 확인하기 위해 형광계를 이용하여 excitation 방향과 $90^{\circ}$의 방향에서 산란되는 빛의 양을 측정하는 방법을 사용하였을 때에 대조군에서는 빛이 산란되지 않았고, SA FtsZ 단백질에 GTP와 $Mg^{2+}$를 처리한 실험군에서만 빛이 산란되는 현상을 관찰하였다. 1분여의 시간이 지난 이후에는 다시 산란되는 빛이 줄어드는 것을 볼 수 있는데, 이것은 SA FtsZ 단백질의 아미노말단 도메인의 GTPase 활성에 의해서 GTP가 분해되어서 SA FtsZ 단백질의 폴리머가 단량체로 분해되었기 때문이라고 예측된다. 본 연구를 통하여 확립된 SA FtsZ 활성 측정 방법은 향후 SA FtsZ 단백질의 폴리머 형성을 저해하는 방식으로 S. aureus를 표적으로 하는 항생제 후보물질 도출을 위한 스크리닝 방법으로 사용될 수 있을 것이다.