• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.539-542
• /
• 1997

We present a micro-positioning stage that has minimized geometrical error and can drive in the 4-axis. This stage divided into two parts: $Z\theta_x$ $\theta_y$, motion stage and$\theta_z$ motion stage. These stages are constructed in flexure hinges, piezoelectric actuators and displacement scnsors. The dynamic model for each stage is obtained and their FE (finite element) models are made. Using the Lagrange's equation, the motion of equation is found. Through the parametric analysis and FE analysis, sensitiv~ty of the design parameters is executed. Finally, fundamental frequencies, maximum stress, and displacement sensitivity for each stage are obtained. We expect that this micro-positioning stage be a useful micro-alignment device for various applications.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1541-1548
• /
• 2004

A nano-stage simulation tool is developed for an advanced E-beam lithography system. Even if piezo-actuators are believed to be compatible fer the E-beam lithograpy system it is difficult to predict their characteristics due to their nonlinearities such as hysteresis and creep. In this paper, the nonlinear properties are modeled for a piezo-actuator by considering the voltage range and speed variations. The hysteresis is described as the first order differential equation with 24 sets of parameters and the creep is modeled as a time-dependent logarithmic function with 2 sets of a parameter. A two-axis nano stage with piezo-actuators are investigated for realizing nano scale motions. The characteristics of flexure guide mechanisms are analyzed based on the finite element method using the ANSYS software. The simulation tool for the nano stage is constructed by using the RecurDyn software. The dynamic response of the nano stage is obtained in simulations and compared with the experimental data.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.143-149
• /
• 2016

The two-stage converter is widely used in traditional DC/AC inverter. It has several disadvantages such as complex topology, large volume and high loss. In order to overcome these shortcomings, a novel half load-cycle worked dual SEPIC single-stage inverter, which is based on the analysis of the relationship between input and output voltages of SEPIC converters operating in the discontinuous conduction mode (DCM), is presented in this paper. The traditional single-stage inverter has remarkable advantages in small and medium power applications, but it can’t realize boost DC/AC output directly. Besides one pre-boost DC/DC converter is needed between the DC source and the traditional single-stage inverter. A novel DC/AC inverter without pre-boost DC/DC converter, which is comprised of two SEPIC converters, is studied. The output of dual SEPIC converters is connected with anti-parallel and half load-cycle control is used to realize boost and buck DC/AC output directly and work properly, whatever the DC input voltage is higher or lower than the AC output voltage. The working principle, parameter selection and the control strategy of the inverters are analyzed in this paper. Simulation and experiment results verify the feasibility of the new inverter.

• Microbiology and Biotechnology Letters
• /
• v.20 no.6
• /
• pp.668-676
• /
• 1992

For the purpose of optimizing poly-l3-hydroxybutyrate (PHB) production from Alcaligenes eutrophus, two-stage fed-batch culture was adopted. In this system, specifk growth rate was maximized during the first stage whereas specific production rate was maximized during the second stage. The optimal concentrations of glucose and ammonium chloride were 16.6 and 0.54 g/I in the growth stage and 20.0 and 0.07 g/l in the production stage, respectively. Proportional feedback control considering time lag was suggested for PHB production process and a simulator was developed for real-time control purpose.

• Journal of Fashion Business
• /
• v.4 no.2
• /
• pp.127-140
• /
• 2000

The purpose of this study was to research and design stage costumes of Whangjinie focusing on inner image of Whangjinie, present stage costumes of new image. Four steps were taken in order to achieve this purpose. The first step was to investigate the old documents and prior research about literature world of Whangjinie. The second step was to analyze stage costumes of Whangjinie which were worn in opera, movie. The third step was to design and make the stage costumes according to new images Whangjinie which were extracted from above two research results. The new images of Whangjinie are as follows 1. Whangjinie as a kisaeng(professional entertainer) She thirsted for new, materialistic love though she failed in love everytime. 2. Whangjinie as a woman. She had a hard time by feeling an irresistible yearning for lover 3. Whangjinie as a poet. She expressed as a poetry her vanity and loneliness of life. Using above three images, this study designed four new stage costumes of Whangjinie and two designs of them were made really. But this study didn't present historic costume of her age but expressed modern mood in color and form.

• Journal of muscle and joint health
• /
• v.18 no.2
• /
• pp.158-168
• /
• 2011

Purpose: The purpose of this study was to compare musculoskeletal pain, menopausal symptoms and depression by women's menopausal stage. Method: With a survey design, a convenience sample of 203 women between age of 40 to 64 was recruited through a community. Data were collected via a structured study questionnaire from May to July, 2008. Measures included with symptom severity list for menopausal symptoms, Aches and Pains scale, and Beck's Depression Inventory. Results: Thirty-seven percent of women belong to early peri-menopausal stage, 31% to late peri-menopausal stage, and 32% to postmenopausal stage. By group comparison, late peri-menopausal and post menopausal women reported higher scores of depression than early peri-menopausal women. Postmenopausal women had greater scores in two pain subscales (bodily pain and pain that interferes with normal work) and two menopausal symptoms subscales (sleep pattern and sexual behaviors) than early peri-menopausal women. There were moderate levels of positive relationships among study variables at each menopausal stage. Conclusion: Postmenopausal women seem to have greater musculoskeletal pain and menopausal symptoms, and have depression more than did early peri-menopausal women. Tailored nursing strategies are required to reduce these kinds of common symptoms for women with menopausal transition to improve their physical and psychological wellbeing.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.33-42
• /
• 2003

In this paper a two-stage maximum-likelihood (ML) detection structure for group detection in DS/CDMA systems is presented. The first stage of the receiver is a linear filter, aimed at suppressing the effect of the unwanted (i.e., out-of-grout) users' signals, while the second stage is a non-linear block, implementing a ML detection rule on the set of desired users signals. As to the linear stage, we consider both the decorrelating and the minimum mean square error approaches. Interestingly, the proposed detection structure turns out to be a generalization of Varanasi's group detector, to which it reduces when the system is synchronous, the signatures are linerly independent and the first stage of the receiver is a decorrelator. The issue of blind adaptive receiver implementation is also considered, and implementations of the proposed receiver based on the LMS algorithm, the RLS algorithm and subspace-tracking algorithms are presented. These adaptive receivers do not rely on any knowledge on the out-of group users' signals, and are thus particularly suited for rejection of out-of-cell interference in the base station. Simulation results confirm that the proposed structure achieves very satisfactory performance in comparison with previously derived receivers, as well as that the proposed blind adaptive algorithms achieve satisfactory performance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.2
• /
• pp.96-102
• /
• 2003

This study was conducted to determine the effects of two plant populations (28 and 14 plants per $m^2$) and two toppings in conventional plant population (28 plants per $m^2$) on soybean (Glycine max L. cv. Pungsannamulkong) cultivated in the paddy field. The two topping time were taken at 6$^{th}$ to 7$^{th}$ and 8$^{th}$ to 9$^{th}$ trifoliolate leaf stages in the conventional plant population. Experimental design for growth data was a randomized complete block with three replications, and samples were taken at R1 (July 31), R3 (August 19), R5 (September 2) and R7 (September 23) growth stages. The branch number of soybean was relatively higher in the low plant population (14 plants per $m^2$) and with the topping at the 6$^{th}$ to 7$^{th}$ leaf stage, in the conventional plant population (28 plants per $m^2$), and with topping at the 8$^{th}$ to 9$^{th}$ trifoliolate leaf stage in descending order. The highest average branch length of soybean was observed in the low population and the longest branch length was observed from the soybean with topping at the 6$^{th}$ to 7$^{th}$ leaf stage. The leaf number per plant was decreased in order of in the low population, with the topping at 6$^{th}$ to 7$^{th}$ trifoliolate leaf stage, with the topping at 8$^{th}$ to 9$^{th}$ trifoliolate leaf stage, and in the conventional population. The leaf area was high in the low population and with topping at 6$^{th}$ to 7$^{th}$ trifoliolate leaf stage and was relatively low in the conventional population and with the topping at 8$^{th}$ to 9$^{th}$ trifoliolate leaf stage in soybean. The dry weight of leaves and branches was high in the low population and with the topping at 6$^{th}$ to 7$^{th}$ trifoliolate leaf stage and was relatively low in the conventional population and with topping at 8$^{th}$ to 9$^{th}$ trifoliolate leaf stage. The leaf number per plant was high in the low population and with topping at 6$^{th}$ to 7$^{th}$ trifoliolate leaf stage and was relatively low in the conventional population and with topping at 8$^{th}$ to 9$^{th}$ trifoliolate leaf stage. The grain yield per 10a was high with the topping at 6$^{th}$ to 7$^{th}$ trifoliolate leaf stage.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.76-83
• /
• 1993

A morphological filtering algorithm using directional information is presented. Directional filtering technique is effective in reducing noises and preserving edges. The proposed directional filtering is composed of two stage filtering processes. The opening and closing operations in the lst stage are performed for the pixels is aligned to the vertical, horizontal, and two diagonal directions, respectively. The opening operation supresses the positive impulse noises, while the closing operation the negative ones. Then, each directional result and their average value are filtered by the opening or closing operations in the 2nd stage. The averaging operation diminishes the effects of Gaussian noises in the homogeneous regions. Thus, the morphological operation in the 1 st stageremoves the impulse noises and in 2nd stage reduces. Gaussian ones. The experimental results show that the proposed filtering is superior to the existing nonlinear filtering in the aspects of the subjective quality. Also, the morphological filtering method reduces the computational loads.

• Journal of the Korean earth science society
• /
• v.24 no.1
• /
• pp.36-45
• /
• 2003

This study is made for examining the characteristics of the lead-zinc deposition from the mineralogy of pyrrhotite at the Yeonhwa 1 Mine, Korea. The pyrrhotite of the Yeonhwa 1 mine is divided two species; the pynhotites I and II. The pyrrhotite I that represents the product in Stage II mineralization is characterized by hexagonal pyrrhotite occurring as the mechanical mixtures of hexagonal and monoclinic phases with various proportion. These mixtures might be formed from 'primary' hexagonal pyrrhotite by the subsequent retrograde reaction and/or by the influence of later mineralization in Stage III. Whereas the pyrrhotite II crystallized out in later Mineralization Stage III (hydrothermal stage) is always monoclinic variant with ferromagnetic properties; no two phase mixtures have been recognized.