• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권5호
• /
• pp.229-237
• /
• 2001

Until recent years, most of the researches for motor drives focus on the high performance drive of the three phase induction motor, and that of the single phase induction motor(SPIM) is out of interest. The SPIM is widely used at low power level because it has the simple construction and economic advantage. In general such machine has both main winding and auxiliary winding. Conventionally, these winding are fed by only one single phase source, and the speed of the motor is not controlled. The SPIM with an auxiliary winding can be treated as an asymmetrical two phase machine. In this paper the space vector Equivalent circuit of SPIM is derived. For vector control of the SPIM the stator current must be decoupled into the flux producing component and the torque producing component. To accomplish decoupling control, the conventional method requires complex calculation and large computation time. We proposed the equivalent circuit referred to the rotor side, in this case only the stator resistances in the direct axis and the quadrature axis are different each other and the other parameters are represented to be equal. Thus the decoupling of the stator current is similar to that of the three phase induction motor. In this paper, the novel vector control system of the single phase induction motor is proposed. To verify the feasibility of this scheme, simulation and experimentation are carried out. The results prove the excellent characteristics for the dynamic response, which confirms the validity of the proposed system.

• 농약과학회지
• /
• 제2권1호
• /
• pp.18-23
• /
• 1998

유기합성을 통한 천연물기원 신농약 선도물질을 얻기 위해 피마자잎으로부터 동정된 활성물질 ricinine의 합성방법을 설정한 후 살충활성을 조사하였다. Ricinine은 4단계과정의 cyanoacetic acid 중합반응과 malono nitrile의 단순고리화 반응 2가지 방법으로 합성하였으며 합성 수율은 중합반응보다 단순고리화 반응에서 높은 수율을 나타냈다. 합성된 ricinine및 중간생성물의 살충활성 조사결과 1,000 ${\mu}g/ml$ 농도수준에서 ricinine은 벼멸구와 콩바구미에 대해 각각 80%, 75%의 살충력을 나타냈다. 점박이응애의 경우 분자구조내에 chloride 기가 존재하는 chloronorricinine과 chlororicinic acid가 500 ${\mu}g/ml$ 수준에서 60%의 살충효과를 보여주었으며, 10 ${\mu}g/ml$ 수준에서 빨간집모기 유충에 대한 활성은 chlororicinine이 44%의 살충력을 나타냈다.

• 한국통신학회논문지
• /
• 제29권3C호
• /
• pp.426-435
• /
• 2004

AAA는 다양한 응용 서비스에 대한 신뢰성을 보장하기 위해 인증, 권한 검증, 과금 등의 기능을 제공하고 있으며, IETF에서는 차세대 AAA 프로토콜로 DIAMETER를 제안하고 있다. 또한 VoIP용 호 설정 프로토콜로서 제안된 SIP(Session Initiation Protocol)는 앞으로의 통신망에서 핵심기능을 담당할 것이며, SIP 서비스에 대한 신뢰성을 보장하기 위해서는 AAA와의 연동이 필요하다. 그러나 SIP에서 사용자 인증을 위한 digest 인증 메커니즘은 man-in-the-middle attack이나 dictionary attack에 취약성을 갖고 있다. 본 논문은 유무선 통합 시그널링 프로토콜로 정착될 SIP와 신뢰성 있는 서비스를 제공하기 위한 AAA 프로토콜인 DIAMETER 간의 인증 연동 방안과 인증 연동에서의 안전성을 분석하였다. 또한 보안상의 취약성 해결을 위해 주소 정보를 포함한 인증 정보의 생성 방안과 패스워드 기반의 상호인증 및 세션키 교환을 위해 AKE-ECC를 적용하는 방법을 제안하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권5호
• /
• pp.1303-1315
• /
• 2012

In the draft of the IEEE 802.11s standard, a tree topology is established by the proactive tree-building mode of the Hybrid Wireless Mesh Protocol (HWMP). It is used for cases in which the root station (e.g., gateway) is an end point of the majority of the data connections. In the tree topology, the root or central stations (e.g., parent stations) are connected to the other stations (e.g., leaves) that are one level lower than the central station. Such mesh stations are likely to suffer heavily from contention in bottleneck links when the network has a high traffic load. Moreover, the dependence of the network on such stations is a point of vulnerability. A failure of the central station (e.g., a crash or simply going into sleep mode to save energy) can cripple the whole network in the tree topology. This causes performance degradation for end-to-end transmissions. In a connected mesh topology where the stations having two or more radio links between them are connected in such a way that if a failure subsists in any of the links, the other link could provide the redundancy to the network. We propose a scheme to utilize this characteristic by organizing the network into concentric tiers around the root mesh station. The tier structure facilitates path recovery and congestion control. The resulting mode is referred to as Tier-based Proactive Path Selection Mode (TPPSM). The performance of TPPSM is compared with the proactive tree mode of HWMP. Simulation results show that TPPSM has better performance.

• 대한기계학회논문집
• /
• 제13권2호
• /
• pp.287-298
• /
• 1989

본 수치적 해석에서는 H$_{w}$/H$_{g}$의 비가 5.0~16.7의 범위에서 수행된 실험결과를 바탕으로 기존의 ｋ-.epsilon. 난류모델을 사용하여, 고려하고자 하는 변수, 즉 유입유속, 입구 게이트의 높이, 수위, 배플의 유.무등에 따라서 액체의 유동형태가 어떻게 변하는가를 살펴 보고자 한다.다.

• 보건행정학회지
• /
• 제26권4호
• /
• pp.305-314
• /
• 2016

Background: The purpose of this study is to examine the characteristics of and factors associated with long-term care (LTC) utilization under public long-term care insurance (LTCI) among end-of-life older adults in Korea. Methods: Using a 5% sample of older people aged 65 or older and their health and LTC insurance data, two-part model analyses were conducted. We compared LTC uses and their determinants during the last year of life among decedents in the year 2010 with those of survivors. We also compared the medical uses of the same sample with their LTC uses. Results: The end-of-life elderly were more likely to use LTC, and their expenditure on LTC was higher than their counterparts. Whether or not older people used LTC during their last year of life was significantly affected by age, sex, health insurance, household income, and living alone; however, LTC costs of the decedents were only affected by functional status, which may have been due to the reimbursement scheme of the current LTCI, which is mainly based on functional dependency level. For the survivors, having chronic diseases significantly increased the likelihood of LTC use, which was not the case for the decedents. End-of-life elderly with relatively low social economic status were more likely to use the LTC other than medical services, while the health conditions affected their medical uses most significantly. Conclusion: The study findings provide key information for predicting demand related to the increasing LTC needs of Korean older people at the end of life.

• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.461-468
• /
• 2012

In this study, a Cartesian-grid method based on finite volume approach is applied to simulate the ship motions in large amplitude waves. Fractional step method is applied for pressure-velocity coupling and TVD limiter is used to interpolate the cell face value for the discretization of convective term. Water, air, and solid phases are identified by using the concept of volume-fraction function for each phase. In order to capture the interface between air and water, the tangent of hyperbola for interface capturing (THINC) scheme is used with weighed line interface calculation (WLIC) method which considers multidimensional information. The volume fraction of solid body embedded in the Cartesian grid system is calculated using a level-set based algorithm, and the body boundary condition is imposed by a volume weighted formula. Numerical simulations for the two-dimensional barge type model and Wigley hull in linear waves have been carried out to validate the newly developed code. To demonstrate the applicability for highly nonlinear wave-body interactions such as green water on the deck, numerical analysis on the large-amplitude motion of S175 containership is conducted and all computational results are compared with experimental data.

• Journal of Communications and Networks
• /
• 제15권3호
• /
• pp.312-320
• /
• 2013

Home evolved Node-B (HeNB), also called a femtocell or a femto base station, is introduced to provide high data rate to indoor users. However, two main problems arise in femtocell networks: (1) Small coverage area of HeNB, which results in limited cell-splitting gain and ping-pong handover (HO) problems and (2) high inter-femtocell interference because HeNBs may be densely deployed in a small region. In this study, an efficient cooperation mechanism called an HeNB-aided virtual-HO (HaVHO) scheme is proposed to expand the coverage area of femtocells and to reduce inter-femtocell interference. The cooperation among neighbor HeNBs is exploited in HaVHO by enabling an HeNB to relay the data of its neighbor HeNB without an HO. The HaVHO procedure is compatible with the existing long term evolution specification, and the information exchange overhead in HaVHO is relatively low. To estimate the signal to interference plus noise ratio improvement, the area average channel state metric is proposed, and the amount of user throughput enhancement by HaVHO is derived. System-level simulation shows that HaVHO has a better performance than the other four schemes, such as lesser radio link failure, lesser ping-pong handover, lesser short-stay handover, and higher user throughput.

• Journal of Communications and Networks
• /
• 제13권4호
• /
• pp.345-359
• /
• 2011

Decode-and-forward relaying is a promising enhancement to existing radio access networks and is already standardized in 3rd generation partnership project (3GPP) as a part of long term evolution (LTE)-Advanced Release 10. Two inband operation modes of relay nodes are supported, namely type 1 and type lb. Relay nodes promise to offer considerable gain for system capacity or coverage, depending on the deployment prioritization, in a cost-efficient way. Yet, in order to fully exploit the benefits of relaying, the inter-cell interference which is increased due to the presence of relay nodes should be limited. Moreover, large differences in the received power levels from different users should be avoided. The goal is to keep the receiver dynamic range low in order to retain the orthogonality of the single carrier-frequency division multiple access system. In this paper, an evaluation of the relay based heterogeneous deployment within the LTE-Advanced uplink framework is carried out by applying the standardized LTE Release 8 power control scheme both at evolved node B and relay nodes. In order to enhance the overall system performance, different power control optimization strategies are proposed for 3GPP urban and suburban scenarios. A comparison between type 1 and type 1b relay nodes is as well presented to study the effect of the relaying overhead on the system performance in inband relay deployments. Comprehensive system level simulations show that the power control is a crucial means to increase the cell edge and system capacities, to mitigate inter-cell interference and to adjust the receiver dynamic range for both relay node types.

• Coupled systems mechanics
• /
• 제9권2호
• /
• pp.163-182
• /
• 2020

Coupled thermo-mechanical analysis of reinforced concrete slab at elevated temperatures from a fire accounting for nonlinear thermal parameters is carried out. The main focus of the paper is put on a one-way continuous reinforced concrete slab exposed to fire from the single (bottom) side as the most typical working condition under fire loading. Although contemporary techniques alongside the fire protection measures are in constant development, in most cases it is not possible to avoid the material deterioration particularly nearby the exposed surface from a fire. Thereby the structural fire resistance of reinforced concrete slabs is mostly influenced by a relative distance between reinforcement and the exposed surface. A parametric study with variable concrete cover ranging from 15 mm to 35 mm is performed. As the first part of a one-way coupled thermo-mechanical analysis, transient nonlinear heat transfer analysis is performed by applying the net heat flux on the exposed surface. The solution of proposed heat analysis is obtained at certain time steps of interest by α-method using the explicit Euler time-integration scheme. Spatial discretization is done by the finite element method using a 1D 2-noded truss element with the temperature nodal values as unknowns. The obtained results in terms of temperature field inside the element are compared with available numerical and experimental results. A high level of agreement can be observed, implying the proposed model capable of describing the temperature field during a fire. Accompanying thermal analysis, mechanical analysis is performed in two ways. Firstly, using the guidelines given in Eurocode 2 - Part 1-2 resulting in the fire resistance rating for the aforementioned concrete cover values. The second way is a fully numerical coupled analysis carried out in general-purpose finite element software DIANA FEA. Both approaches indicate structural fire behavior similar to those observed in large-scale fire tests.