• The korean journal of orthodontics
• /
• v.52 no.4
• /
• pp.287-297
• /
• 2022

Objective: To investigate the pattern of accuracy change in artificial intelligence-assisted landmark identification (LI) using a convolutional neural network (CNN) algorithm in serial lateral cephalograms (Lat-cephs) of Class III (C-III) patients who underwent two-jaw orthognathic surgery. Methods: A total of 3,188 Lat-cephs of C-III patients were allocated into the training and validation sets (3,004 Lat-cephs of 751 patients) and test set (184 Lat-cephs of 46 patients; subdivided into the genioplasty and non-genioplasty groups, n = 23 per group) for LI. Each C-III patient in the test set had four Lat-cephs: initial (T0), pre-surgery (T1, presence of orthodontic brackets [OBs]), post-surgery (T2, presence of OBs and surgical plates and screws [S-PS]), and debonding (T3, presence of S-PS and fixed retainers [FR]). After mean errors of 20 landmarks between human gold standard and the CNN model were calculated, statistical analysis was performed. Results: The total mean error was 1.17 mm without significant difference among the four time-points (T0, 1.20 mm; T1, 1.14 mm; T2, 1.18 mm; T3, 1.15 mm). In comparison of two time-points ([T0, T1] vs. [T2, T3]), ANS, A point, and B point showed an increase in error (p < 0.01, 0.05, 0.01, respectively), while Mx6D and Md6D showeda decrease in error (all p < 0.01). No difference in errors existed at B point, Pogonion, Menton, Md1C, and Md1R between the genioplasty and non-genioplasty groups. Conclusions: The CNN model can be used for LI in serial Lat-cephs despite the presence of OB, S-PS, FR, genioplasty, and bone remodeling.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.63-73
• /
• 2006

Numbers of postulations lie on the difference of integumental changes with two major surgical remedies of one jaw vs. two jaw surgery in skeletal Class III malocclusion. Accordingly it was the aim of the study to elucidate the skeletal profile changes with an accompanying disposition of soft tissues, consequently to yield the correlation and ratio of soft tissue changes with two types of surgical procedures, which in turn make it possible to predict the soft tissue outcomes by means of assembled regression equations. Cephalometric headfilms of fifty two adult skeletal Class III comprised of 26 maxillary advancement by Le Fort I osteotomy and mandibular setback by sagittal split ramus osteotomy simultaneously (double jaw surgery, group A), 26 mandibular setback alone (one jaw surgery, group B) were statistically analyzed. Group A manifested 72.4% soft tissue advancement to skeletal changes in the upper lip area, while group B appeared to have no statistically significant changes. The nasolabial angle showed more increment in group A than in group B, whereas the mentolabial angle illustrated more reduction in group B. The backward movement of soft tissue pogonion to skeletal change revealed 98% in group A, and 109% in group B. The double jaw surgery group characteristically revealed remarkable integ umental change in the upper lip area, while the one jaw surgery had major effects in the lower lip and soft tissue pogonion areas.

• Archives of Craniofacial Surgery
• /
• v.13 no.1
• /
• pp.4-10
• /
• 2012

Purpose: The objective of this retrospective study was to assess the skeletal stability after orthognathic surgery for patients with cleft lip and palate. The soft tissue changes in relation to the skeletal movement were also evaluated. Methods: Thirty one patients with cleft received orthognathic surgery by one surgeon at the Craniofacial Center, Chang Gung Memorial Hospital, Taoyuan, Taiwan. Osseous and soft tissue landmarks were localized on lateral cephalograms taken at preoperative (T0), postoperative (T1), and after completion of orthodontic treatment (T2) stages. Surgical movement (T0.T1) and relapse (T1.T2) were measured and compared. Results: Mean anteroposterior horizontal advancement of maxilla at point A was 5.5 mm, and the mean horizontal relapse was 0.5 mm (9.1%). The degree of horizontal relapse was found to be correlated to the extent of maxillary advancement. Mean vertical lengthening of maxilla at point A was 3.2 mm, and the mean vertical relapse was 0.6 mm (18.8%). All cases had maxillary clockwise rotation with a mean of 4.4 degrees. The ratio for horizontal advancement of nasal tip/anterior nasal spine was 0.54/1, and the ratio of A' point/A point was 0.68/1 and 0.69/1 for the upper vermilion/upper incisor tip. Conclusion: Satisfactory skeletal stability with an acceptable relapse rate was obtained from this study. High soft tissue to skeletal tissue ratios were obtained. Two-jaw surgery, clockwise rotation, rigid fixation, and alar cinch suture appeared to be the contributing factors for favorable results.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.643-655
• /
• 2000

In Patients with severe skeletal discrepancy, surgical orthodontic treatment must be accompanied, and recently two jaw surgery has become a common procedure, resulting in improved esthetics and function. Choosing the position of the occlusal plane in this two jaw surgery is an important factor in postoperative stability Therefore this must be taken into consideration during the diagnosis and treatment plan. In this study, among patients with skeletal Class III occlusion, 25 patients(8 male, 17 female, average age $23.2{\pm}3.17$) who have undergone two jaw surgery, setting the ideal occlusal plane according to Delaire's architectural and structural cranial analysis. In comparing preoperative($T_1$). postoperative($T_2$, average of 15.4 days), and long-term postoperative($T_3$, average of 32.6 months) lateral cephalometric radiography, the following conclusions have been made. 1. There were no significant changes of the occlusal plane angle after the two jaw surgery, and there were no significant differences between the surgical technique(SSRO and IVRO). 2. The postoperative changes of the occlusal Plane had no relationship with the amount of jaw movement, amount of posterior impaction, nor the time relapse after surgery. 3. After two jaw surgery, in the SSRO group there was significant forward movement of the mandible, and in the IVRO group the lower incisors extruded as the mandible moved backward and downward which makes the genial angle and the mandibular plane angle significantly increased

• The korean journal of orthodontics
• /
• v.52 no.3
• /
• pp.172-181
• /
• 2022

Objective: The objectives of this study were to compare the time-dependent changes in occlusal contact area (OCA) and bite force (BF) of the deviated and non-deviated sides in mandibular prognathic patients with mandibular asymmetry before and after orthognathic surgery and investigate the factors associated with the changes in OCA and BF on each side. Methods: The sample consisted of 67 patients (33 men and 34 women; age range 15-36 years) with facial asymmetry who underwent 2-jaw orthognathic surgery. OCA and BF were taken before presurgical orthodontic treatment, within 1 month before surgery, and 1 month, 3 months, 6 months, 1 year, and 2 years after surgery. OCA and BF were measured using the Dental Prescale System. Results: The OCA and BF decreased gradually before surgery and increased after surgery on both sides. The OCA and BF were significantly greater on the deviated side than on the non-deviated side before surgery, and there was no difference after surgery. According to the linear mixed-effect model, only the changes in the mandibular plane angle had a significant effect on BF (p < 0.05). Conclusions: There was a difference in the amount of the OCA and BF between the deviated and non-deviated sides before surgery. The change in mandibular plane angle affects the change, especially on the non-deviated side, during the observation period.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.10 no.2
• /
• pp.166-171
• /
• 2010

Background: Controlled hypotension is used to reduce bleeding and improve surgical conditions during surgery. Nicardipine and remifentanil have been used to induce controlled hypotension in healthy patients. This study compared controllability of nicardipine and remifentanil on hemodynamic stability during controlled hypotension. Methods: Forty healthy patients scheduled for orthognathic two jaw surgery were randomly allocated to nicardipine (group N) and remifentanil (group R) group. After induction of anesthesia, group N (n = 20) was infused with nicardipine to induce hypotension and group R (n = 20) was infused with remifentanil. Mean arterial pressure (MAP) and heart rate (HR) were measured over 5 minute interval. Surgical field rating and blood loss were measured after surgery. Results: HR was lower in group R than group N. MAP was maintained at 50-60 mmHg during controlled hypotension but the fluctuation of blood pressure and HR were more frequent in group N than group R. There were no significant differences in the surgical field rating and blood loss between the groups. Conclusions: Nicardipine and remifentanil enabled controlled hypotension and provided good surgical conditions, but the fluctuation of hemodynamic parameters was more frequent in nicardipine group.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.2
• /
• pp.117-129
• /
• 1997

Recently, combined with social complexity, increment of medical demand and supply and the change of esthetic category, admission and operation of the patients of facial deformity have been changed with annual change. This study was conducted in the concept of helping the overall character of orthognathic surgery in future understood and being an important index in the establishment of better treatment course, through the patient, on whom was operated orthognathic surgery via sagittal split ramal osteotomy in our Dept. of Oral & Maxillofacial Surgery, Chonbuk National University Hospital from 1991. 1. 1 to 1995. 12. 31. The results were obtained as follows. 1. The ratio of male to female was 1 : 1.33 and the ages between 16 and 25 year was 73.6%, and the mean age was 20.4 years. 2. The ratio of setback amount between 6 to 15mm was 84.6% and the advancement amount between 1 to 10mm was 89% and the mean amount of movement was 9.0mm in setback, and 3.6mm in advancement. 3. After removal of maxillomandibular fixation(MMF), the distinction of sex was not statistically significant in ROM. 4. The ROM following methods of fixation was statistically significant in 3rd(P<0.05), 8th, and 12th week(each P<0.01), with faster rehabilitation in rigid fixation which had shorter MMF period. 5. The rehabilitation of ROM following the operation methods was statistically significant in 1st(P<0.05), 2nd, 3rd, 4th, 6th, 8th, and 12th week(each P<0.01) with faster rehabilitation in the case of SSRO than Lefort I / SSRO (Two jaw surgery). 6. The rehabilitation of ROM following directions of mandibular movement did not manifest a statistically significant difference in both setback and advancement.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.24.1-24.7
• /
• 2020

Background: In daily practice, three-dimensional patient-specific jawbone models (3D models) are a useful tool in surgical planning and simulation, resident training, patient education, and communication between the physicians in charge. The progressive improvements of the hardware and software have made it easy to obtain 3D models. Recently, in the field of oral and maxillofacial surgery, there are many reports on the benefits of 3D models. We introduced a desktop 3D printer in our department, and after a prolonged struggle, we successfully constructed an environment for the "in-house" fabrication of the previously outsourced 3D models that were initially outsourced. Through various efforts, it is now possible to supply inexpensive 3D models stably, and thus ensure safety and precision in surgeries. We report the cases in which inexpensive 3D models were used for orthodontic surgical simulation and discuss the surgical outcomes. Review: We explained the specific CT scanning considerations for 3D printing, 3D printing failures, and how to deal with them. We also used 3D models fabricated in our system to determine the contribution to the surgery. Based on the surgical outcomes of the two operators, we compared the operating time and the amount of bleeding for 25 patients who underwent surgery using a 3D model in preoperative simulations and 20 patients without using a 3D model. There was a statistically significant difference in the operating time between the two groups. Conclusions: In this article, we present, with surgical examples, our in-house practice of 3D simulation at low costs, the reality of 3D model fabrication, problems to be resolved, and some future prospects.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.5
• /
• pp.316-324
• /
• 2013

This case report describes the treatment of a 23-year-old woman who had lip protrusion with gummy smile and mentalis muscle strain. Orthognathic surgery was performed in conjunction with orthodontics. Minimum dental decompensation was performed with presurgical orthodontics followed by an anterior segmental osteotomy for the majority of dental decompensation. Counterclockwise rotation of the maxillomandibular complex was applied by LeFort I osteotomy, and bilateral sagittal split ramus osteotomies with anterior segmental osteotomy to achieve overall facial balance. The active treatment period was 15 months. Stable occlusion and skeletal relationship were observed after a 10-month follow-up period.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.4
• /
• pp.319-322
• /
• 2011

Purpose: The purpose of this study was to examine the appropriate degree of set-back of the mandible by evaluating the rate of relapse after surgery. Methods: Among the patients who visited our hospital from January 2002 to January 2007 and who underwent orthognathic surgery, of the patients available for follow-up observation, the rate of relapse after surgery was investigated according to the set-back degree. The patients were divided into groups by the degree of set-back, and relapse was evaluated by the radiographs performed the day after surgery, 6 months after surgery, 1 year after surgery, 2 years after surgery and 3 years after surgery. Results: In cases that exceeded the limit of posterior movement of the mandible (13 mm) or that had the wrong position of the condyle, a greater tendency toward relapse was shown. Conclusion: Based on the results of this study, among the cases that required a large amount of posterior movement of the mandible, two jaw surgeries accompanied by bilateral sagittal split ramus osteotomy (BSSRO) and LeFort I osteotomy are recommended.