• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.111-116
• /
• 1999

Over the last few years, there has been a growing interest in quantitative representation of heat transfer and fluid flow phenomena in weld pools in order to relate the processing conditions to the quality of the weldment produced and to use this information for the optimization and robotization of the welding process. Normally, a theoretical model offers a powerful alternative to estimate the important input parameters and to calculate the effects of varying any of parameters. To solve this problem, a transient 2D(two-dimensional) heat conduction and a transient 2D axisymmetric heat and fluid model were developed for determining weld bead geometry and temperature distribution for the GMA(Gas Metal Arc) welding process. The equation was solved using a general thermofluid-mechanics computer program, PHOENICS code, which is based on the SIMPLE algorithm. The simulation results showed that the calculated bead geometry from two developed models reasonably agree with the experiment result.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.150.1-150.1
• /
• 2014

Showerhead is used as a main part in the semiconductor equipment. The face plate flatness should remain constant and the cleaning performance must be gained to keep the uniformity level of etching or deposition in chemical vapor deposition process. High operating temperature or long period of thermal loading could lead the showerhead to be deformed thermally. In some case, the thermal deformation appears very sensitive to showerhead performance. This paper describes the methods for robust design using computational fluid dynamics. To reveal the influence of the post distribution on flow pattern in the showerhead cavity, numerical simulation was performed for several post distributions. The flow structure appears similar to an impinging flow near a centered baffle in showerhead cavity. We took the structure as an index to estimate diffusion path. A robust design to reduce the thermal deformation of showerhead can be achieved using post number increase without ill effect on flow. To prevent the showerhead deformation by heat loading, its face plate thickness was determined additionally using numerical simulation. The face plate has thousands of impinging holes. The design key is to keep pressure drop distribution on the showerhead face plate with the holes. This study reads the methodology to apply to a showerhead hole design. A Hagen-Poiseuille equation gives the pressure drop in a fluid flowing through such hole. The assumptions of the equation are the fluid is viscous-incompressible and the flow is laminar fully developed in a through hole. An equation can be expressed with radius R and length L related to the volume flow rate Q from the Hagen-Poiseuille equation, $Q={\pi}R4{\Delta}p/8{\mu}L$, where ${\mu}$ is the viscosity and ${\Delta}p$ is the pressure drop. In present case, each hole has steps at both the inlet and the outlet, and the fluid appears compressible. So we simplify the equation as $Q=C(R,L){\Delta}p$. A series of performance curves for a through hole with geometric parameters were obtained using two-dimensional numerical simulation. We obtained a relation between the hole diameter and hole length from the test cases to determine hole diameter at fixed hole length. A numerical simulation has been performed as a tool for enhancing showerhead robust design from flow structure. Geometric parameters for the design were post distribution and face plate thickness. The reinforced showerhead has been installed and its effective deposition profile is being shown in factory.

• 한국전산구조공학회논문집
• /
• 제16권1호
• /
• pp.95-104
• /
• 2003

본 논문은 사각형 연료 탱크 내 비점성, 비압축성, 비회전 유동에 대한 슬로싱 주파수 응답의 유한요소 해석을 다룬다. 지배방정식으로 포텐셜 이론을 기반으로 한 라플라스 방정식을 적용한다. 슬로싱 운동이 작다고 가정하여 선형화된 자유표면 조건을 적용하였고, 변수분리기법을 이용하여 이론해를 구하였다. 점성 감쇠에 따른- 에너지 소산의 영향을 구현하기 위해 가상치 점성 계수를 도입하였으며, 이고 인해 공진 주파수에서 응답의 발산을 방지할 수 있나. 슬로싱 응답의 최대 진폭을 예측하기 위해 9절점 요소를 사용한 유한요소법을 이용하여 해석하였다. 슬로싱 높이, 유체 내부 동수압 및 내부 유체력의 수치 결과는 이론해와 잘 일치하였다. 유한요소 시험 프로그램을 검증한 후, 유체높이에 따른 슬로싱 주파수 응답 특성을 분석하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.682-685
• /
• 2017

본 연구는 비원형 Effervescent Type 이유체 노즐의 분사 특성을 조사하기 위한 실험적 연구를 수행하였다. 이를 위해 거의 동일한 노즐 출구 면적으로 가공한 2종류의 비원형 노즐 (E1, E2)과 1종류의 원형 노즐 (C)을 대상으로 비교 실험을 진행하였다. 이때 노즐에 장착된 Aerorator는 노즐 출구 면적과의 Aspect Ratio를 맞추기 위해 지름이 다른 3종류를 사용하였다. 따라서 각 노즐마다 3가지의 Aspect Ratio에 따라 3번의 실험을 진행하였으며, 전체 총 9종의 실험이 진행되었다. 실험은 Liquid의 유량을 고정시킨 후, 유입되는 Air의 양을 제어하며 진행하였으며, 노즐 내부 압력과 액적의 크기 (SMD)를 측정하고 노즐에서 분사 이미지를 촬영하였다. 이를 통해 3종의 노즐의 유량 계수를 압력 분무방정식과 Jedelsky 방정식을 비교 계산하였고, Jedelsky 방정식이 약 4배 정도 더 큰 값을 갖는 것을 확인하였다. 노즐에서 분사되는 SMD는 원형보다 비원형에서 더 작은 값을 갖는 것으로 나타났으며, 이는 유량 계수 값의 차이 의해 야기된 것으로 예상된다.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.421-427
• /
• 2005

This work analyzes the behaviors of aerated lubricant in the gap between con-rod bearing and journal. It is assumed that the film formation with aerated lubricant is influenced by the two major factors. One is the density characteristics of the lubricant due to the volume change of lubricant for the formation of bubbles and the other is the viscosity characteristics of the lubricant due to the surface tension of the bubble in the lubricant. These two major factors surprisingly increase the load capacity in some ranges of bubble sizes and densities. Modified Reynolds' equation is developed for the computation of fluid film pressure with the effects of aeration ratio in the lubricant. From the calculated load capacity by solving modified Reynolds' equation, journal locus is computed with Mobility method after comparing it with the applied load at each time step. The differences of journal orbits between aerated and pure lubricants are shown in the computed results.

• 한국해양공학회지
• /
• 제10권3호
• /
• pp.96-104
• /
• 1996

Hamilton's principle is used to derive Euler-Lagrange equations for free surface flow problems of incompressible ideal fluid. The velocity field is chosen to satisfy the continuity equation a priori. This approach results in a hierarchial set of governing equations consist of two evolution equations with respect to two canonical variables and corresponding boundary value problems. The free surface elevation and the Lagrange's multiplier are the canonical variables in Hamilton's sense. This Lagrange's multiplier is a velocity potential defined on the free surface. Energy is conserved as a consequence of the Hamiltonian structure. These equations can be applied to waves in water of finite depth including generalization of Hamilton's equations given by Miles and Salmon.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.150-155
• /
• 1994

An Approximate solution for plane two-dimensional incompressible laminar jet issuing from a finite opening with arbitrary initial profile into the same ambient fluid is proposed. For an arbitrary initial velocity profile, the problem is generated from the well known similarity solution for the jet of infinitesimal opening and provides good approximations in the region where the similarity solution cannot be used as an approximation. The asymptotic behavior of this solution is investigated and it is shown that, as goes downstream, the present solution approachs the similarity solution.

• Korea-Australia Rheology Journal
• /
• 제13권3호
• /
• pp.141-148
• /
• 2001

In this research, experimental studies leave been performed on the hydrodynamic interaction between a spherical particle and a plane wall by measuring the force between the particle and wall. To approach the system as a resistance problem, a servo-driving system was set-up by assembling a microstepping motor, a ball screw and a linear motion guide for the particle motion. Glycerin and dilute solution of polyacrylamide in glycerin were used as Newtonian and non-Newtonian fluids, respectively. The polymer solution behaves like a Boger fluid when the concentration is 1,000 ppm or less. The experimental results were compared with the asymptotic solution of Stokes equation. The result shows that fluid inertia plays all important role in the particle-wall interaction in Newtonian fluid. This implies that the motion of two particles in suspension is not reversible even in Newtonian fluid. In non-Newtonian fluid, normal stress difference and viscoelasticity play important roles as expected. In the dilute solution weak shear thinning and the migration of polymer molecules in the inhomogeneous flow field also affect the physic of the problem.

• 물과 미래
• /
• 제27권2호
• /
• pp.155-166
• /
• 1994

Eulerian-Lagrangian 방법을 이용하여 1차원 종확산방정식의 수치모형을 비교·분석하였다. 본 연구에서서 비교·분석한 모형은 지배방정식을 연산자 분리방법에 의해서 이송만을 지배하는 이송방정식과 확산만을 지배하는 확산방정식으로 분리한다. 이송방정식은 특성곡선을 따라서 유체입자를 추적하는 특성곡선법을 사용하여 해를 구하고, 그 결과를 고정된 Eulerian 격자상에 보간하였고, 확산방정식은 상기 고정격자상에서 Crank-Nicholson 유한차분법을 사용하여 해를 구하였다. 이송방정식의 풀이에서 다양한 보간방법이 적용되었는데, 일반적으로 Hermite 보간다항식을 사용한 경우가 Lagrange 보간다항식을 사용한 경우보다 수치확산 및 수치진동 등의 오차를 최소화할 수 있어서 더욱 우수한 것으로 밝혀졌다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.416-421
• /
• 2001

This paper presents the numerical prediction of sound generated by viscous flow past a circular cylinder. The two dimensional flow field is predicted using FEM based Reynolds-averaged Navier-Stokes solver, and the calculated unsteady fluid field values are utilized by an acoustic code that implements Ffowcs Willianms-Hawkings(FW-H) equation. The integration surface used in acoustic analysis is extended from the cylinder surface to permeable surfaces. The 2D based CFD calculations overpredict the acoustic amplitude, however, if adequate correlation length is used, the predicted acoustic amplitude agrees well with experiment. The predictions using extended integral surface in FW-H equation show results that contain the characteristics of quadrupole - volume integration - noise term, and do not vary seriously with the integral surface location.