• 제목/요약/키워드: Two-finger technique

검색결과 51건 처리시간 0.025초

1인 구조자 영아 심폐소생술 가슴압박 방법에 따른 효율성 및 편리성 비교 (Comparing the efficiency and convenience of one-rescuer cardiopulmonary resuscitation chest compression techniques for infants)

  • 김용준;이경열
    • 한국응급구조학회지
    • /
    • 제23권2호
    • /
    • pp.109-123
    • /
    • 2019
  • Purpose: This study aimed to propose an effective one-rescuer infant cardiopulmonary resuscitation (CPR) chest compression technique by comparing the differences in efficacy, convenience, and pain levels between the two thumb-encircling and two finger techniques. Methods: Subjects were randomized to perform either two-thumb-encircling or two-finger technique for 8 minutes each on infant CPR manikins. After the chest compression, a survey was administered to the subjects to measure convenience and pain levels according to compression method. Results: Total compression depth over 8 minutes was significantly deeper for the two-thum-encircling technique ($43.5{\pm}4.8mm$) compared with the two-finger technique ($32.6{\pm}5.4mm$) (p<0.001). In terms of compression depth measured at 1-minute intervals, compression depth with the two-finger technique decreased from $38.3{\pm}4.23mm$ to $29.0{\pm}6.79mm$, whereas compression depth with the two-thumb-encircling technique did not show a significant change (from $43.7{\pm}4.12mm$ to $43.4{\pm}5mm$). The results of the survey indicated that, the majority of subjects found the two-thumb-encircling technique to be the most comfortable technique for compression depth (n=29, 64.4%). The majority of subjects (n=31, 68.9%) answered that the two-finger technique resulted in the most pain. Conclusion: Comparison of efficacy of the two-thumb-encircling and two-finger-techniques in the performance of one-rescuer infant CPR revealed that the two-thumb-encircling technique was more effective in maintaining chest compression depth.

기관내 삽관 후 백 압착법에 따른 호흡량 비교 (Comparison of tidal volume of two different bag squeezing techniques in endotracheal intubation settings)

  • 강민주;탁양주
    • 한국응급구조학회지
    • /
    • 제21권1호
    • /
    • pp.99-109
    • /
    • 2017
  • Purpose: There is no recommended bag-squeezing technique for emergency medical providers to maintain correct tidal volume during mechanical ventilation. This study compared the tidal volume of two different bag-squeezing techniques during mechanical ventilation. Methods: The subjects were 38 paramedic students who were trained in airway management techniques. Two different bag-squeezing techniques were used with a bag valve mask on an intubated manikin: a conventional technique and a finger-marked, in which the bag is squeezed until the thumb and the middle finger come into contact. Hand size and grip strength were measured and analyzed statistically. Results: The mean tidal volumes for the finger-marked were significantly higher than those for the conventional technique ($542.6{\pm}35.92mL$ versus $338.0{\pm}111.15 mL$, p<.001). There was a correlation between the two techniques (Pearson $x^2=1.160$, p<.001). The subject's characteristics, including sex, hand size, and grip strength, showed no correlation with tidal volume. Conclusion: A finger-marked bag-squeezing technique provides adequate and correct tidal volumes during mechanical ventilation.

Effectiveness of the novel impression tray "cleftray" for infants with cleft lip and palate: a randomized controlled clinical trial

  • Kalaskar, Ritesh;Bhaje, Priyanka;Balasubramanian, Shruti;Kalaskar, Ashita
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제47권2호
    • /
    • pp.82-90
    • /
    • 2021
  • Objectives: Cleft lip and palate (CLP) is one of the most common congenital deformities with worldwide prevalence. It causes a range of issues for infants that mainly involve difficulty in feeding due to abnormal oronasal communication. For this purpose, feeding plates are provided to infants to act as an artificial palate to aid in feeding. The most crucial procedure in fabrication of a feeding plate is creation of the impression using the traditional finger technique or impression trays. This preliminary research aims to compare the effectiveness of novel impression trays with that of the traditional finger technique for recording impressions of infants with CLP. Materials and Methods: This randomized controlled trial was conducted among 30 infants who were divided into two groups based on the method of obtaining impressions: Group I, finger technique; Group II, specialized acrylic tray (cleftray). Results: Use of cleftray required less impression time, a reduced amount of material, no incidence of cyanosis/choking in infants, and lower anxiety among doctors compared to the traditional method. Additionally, there was no distortion of cleft impressions, recorded maxillary tuberosity, or other fine details. Therefore, the novel impression tray (cleftray) exhibited superior outcomes in all the parameters compared to the finger technique. Conclusion: Within the limitations of this study, we conclude that impression trays are superior to the traditional finger, spoon, or ice cream stick methods of creating impressions of CLP. However, it is necessary to conduct more clinical trials on a larger population based on other parameters to compare the effectiveness of the two techniques to draw definitive conclusions.

도서형 신경 혈관 피판을 이용한 수지의 피부 및 연부조직 결손의 재건술 (Neurovascular Island Graft for Finger Tip Loss)

  • 정덕환;한정수;김기봉
    • Archives of Reconstructive Microsurgery
    • /
    • 제10권2호
    • /
    • pp.99-104
    • /
    • 2001
  • Purpose : Loss of sensibility over the finger tip resents a grave deficit and is an indication for sensible soft tissue reconstruction. This paper was performed to assess the long term results obtained by nerovascular island flap. Material and Methods : We performed neurovascular island graft for defective sensibility of finger tip loss in 94 cases since 1979 to 2000. The recipient sites were the thumb pulp defect in 79 cases, the amputated thumb in 9 cases, the amputated index in 4 cases, and the velar aspect of interphalangeal joint of thumb in 2 cases. The donor flaps were obtained from the radial side of ring finger in 63 cases, the ulnar side of the ring finger in 21 cases, and the ulnar side of the middle finger in 10 cases. A mean follow-up period was 5.7 years. Results : The flap quality was well vascularized and survived in 89 cases. The two-point discrimination was average 8.7mm. Because of scar contracture, the range of motion of the donor finger was decreased 3.5% of the normal finger in the distal interphalangeal joint, 8,2% in the proximal interphalangeal joint. A phenomenon of double sensibility occurred in 66 cases. Conclusion : This technique was excellent both aesthetically and functionally as a reconstruction of the Loss of fingertip.

  • PDF

광용적맥파(PPG)를 이용한 호흡수 측정에 있어서 동잡음을 이용한 정확도 향상 (Accuracy improvement of respiration rate based on photo-plethysmography by enhancing motion artifact)

  • 허영정;윤길원
    • 센서학회지
    • /
    • 제17권6호
    • /
    • pp.447-453
    • /
    • 2008
  • Respiration rate is one of the important vital signs. Photo-plethysmography (PPG) measurement especially on a finger has been widely used in pulse oximetry and also used in estimating respiration rate. It is well known that PPG contains respiration-induced intensity variation (RIIV) signal. However, the accuracy of finger PPG method has been controversial. We introduced a new technique of enhancing motion artifact by respiration. This was achieved simply by measuring PPG on the thorax. We examined the accuracy of these two PPG methods by comparing with two existing methods based on thoracic volume and nostril temperature changes. PPG sensing on finger tip, which is the most common site of measurement, produced 6.1 % error. On the other hand, our method of PPG sensing on the thorax achieved 0.4 % error which was a significant improvement. Finger PPG is sensitive to motion artifact and it is difficult to recover fully small respiratory signal buried in waveform dominated by absorption due to blood volume changes. Thorax PPG is poor to represent blood volumes changes since it contains substantial motion artifact due to respiration. Ironically, this inferior quality ensures higher accuracy in terms of respiration measurement. Extreme low-cost and small-sized LED/silicon detector and non-constrained reflection measurement provide a great candidate for respiration estimation in ubiquitous or personal health monitoring.

임의 물체에 대한 최적 3차원 Grasp Planning (Optimal 3D Grasp Planning for unknown objects)

  • 이현기;최상균;이상릉
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.462-465
    • /
    • 2002
  • This paper deals with the problem of synthesis of stable and optimal grasps with unknown objects by 3-finger hand. Previous robot grasp research has analyzed mainly with either unknown objects 2D by vision sensor or unknown objects, cylindrical or hexahedral objects, 3D. Extending the previous work, in this paper we propose an algorithm to analyze grasp of unknown objects 3D by vision sensor. This is archived by two steps. The first step is to make a 3D geometrical model of unknown objects by stereo matching which is a kind of 3D computer vision technique. The second step is to find the optimal grasping points. In this step, we choose the 3-finger hand because it has the characteristic of multi-finger hand and is easy to modeling. To find the optimal grasping points, genetic algorithm is used and objective function minimizing admissible farce of finger tip applied to the object is formulated. The algorithm is verified by computer simulation by which an optimal grasping points of known objects with different angles are checked.

  • PDF

3차원 영상처리 기술을 이용한 Grasp planning의 최적화 (The Optimal Grasp Planning by Using a 3-D Computer Vision Technique)

  • 이현기;김성환;최상균;이상룡
    • 한국정밀공학회지
    • /
    • 제19권11호
    • /
    • pp.54-64
    • /
    • 2002
  • This paper deals with the problem of synthesis of stable and optimal grasps with unknown objects by 3-finger hand. Previous robot grasp research has mainly analyzed with either unknown objects 2-dimensionally by vision sensor or known objects, such as cylindrical objects, 3-dimensionally. As extending the previous work, in this study we propose an algorithm to analyze grasp of unknown objects 3-dimensionally by using vision sensor. This is archived by two steps. The first step is to make a 3-dimensional geometrical model for unknown objects by using stereo matching. The second step is to find the optimal grasping points. In this step, we choose the 3-finger hand which has the characteristic of multi-finger hand and is easy to model. To find the optimal grasping points, genetic algorithm is employed and objective function minimizes the admissible force of finger tip applied to the objects. The algorithm is verified by computer simulation by which optimal grasping points of known objects with different angle are checked.

침전지 유출부 구조 Remodeling을 통한 개선사례 연구 (Case Study on Remodeling Outlet Structure within a Sedimentation Basin for Improving Performance)

  • 김성수;박노석;문용택;이선주
    • 상하수도학회지
    • /
    • 제20권6호
    • /
    • pp.911-918
    • /
    • 2006
  • This study was conducted to evaluate the effect of the launder type on settling performance and hydrodynamic behavior within the two certain full-scale sedimentation basins (each flow rate/one basin; $10,000m^3/d$); one is the transverse typed launder(existing basin) and the other is building the finger type launder in combination with the longitudinal baffle. Comparative experimental investigations have been carried out through residual turbidity and particle concentration measurements in each effluent from two basins with the transverse and the finger type launders, respectively. From the experimental results, we could observe that turbidity removal rate in the finger type launder basin (modified basin) is about 30% higher than that in the transverse type launder basin (existing basin). Also, from the measurement of total particle concentration in each effluent, the removal efficiency was improved about 27% within modified basin compared to the existing basin. In order to explain the comparative experimental results and investigate the hydridynamic behavior within each basin in more detail, we conducted computational fluid dynamics (CFD) simulation and verified simulation results with acoustic Doppler velocimetry (ADV) technique. From the CFD simulation, it was investigated that extreme upward flow occurs underneath of the transverse launder. On the other hand, in the case of modified basin, the upward flow, which occurred in the beneath of launder, was much less than that in the existing basins.

Nebulin C-terminus Interacts with NCBP51, a New Isoform of RING Finger Protein 125 (RNF125)

  • Kim, Ji-Hee;Kim, Hyun-Suk;Park, Eun-Ran;Choi, Jae-Kyoung;Lee, Yeong-Mi;Choi, Jun-Hyuk;Shin, Jung-Woog;Kim, Chong-Rak
    • 대한의생명과학회지
    • /
    • 제13권1호
    • /
    • pp.1-10
    • /
    • 2007
  • Nebulin, a giant modular protein from muscle, is thought to act as molecular ruler in sarcomere assembly. In skeletal muscle, the C-terminal ${\sim}50 kDa$ region of nebulin extends into the Z-line lattice. The most recent studies implicated highlighting its extensive isoform diversity and exciting reports revealed its expression in cardiac and non-muscle tissues containing brain. Also these novel findings are indicating that nebulin is actually a multifunctional filament system, perhaps playing roles in signal transduction, contractile regulation, and myofibril force generation, as well as other not yet defined functions. However the binding protein of nebulin and function in brain is still unknown. A novel binding partner of nebulin C-terminal region was identified by screening a human brain cDNA library using yeast two-hybrid system. Nebulin C-terminus binding protein 51 (NCBP51) was contained a RING-finger domain and identified a new isoform of RING finger protein 125 (RNF125). The interaction was confirmed using the GST pull-down assay. NCBP51 belongs to a family of the RING finger proteins and its function remains to be identified in brain. The role of nebulin and NCBP51 will be studied by loss-of-function using siRNA technique in brain.

  • PDF

유리 동맥화 정맥 피판을 이용한 수지 연부조직 결손의 재건 (Reconstruction of Soft Tissue Defects in the Finger using Arterialized Venous Free Flaps)

  • 이영근;우상현;이준모;안희찬;천호준
    • Archives of Reconstructive Microsurgery
    • /
    • 제19권1호
    • /
    • pp.21-28
    • /
    • 2010
  • Purpose: To report the clinical results of the use of arterialized venous free flaps in reconstruction in soft tissue defects of the finger and to extend indications for the use of such flaps based on the clinical experiences of the authors. Materials and Methods: Eighteen patients who underwent arterialized venous free flaps for finger reconstruction, between May 2007 and July 2009 were reviewed retrospectively. The mean flap size was 4.7${\times}3.2$ cm. The donor site was the ipsilateral volar aspect of the distal forearm in all cases. There were 8 cases of venous skin flaps, 5 cases of neurocutaneous flaps, 4 cases of tendocutaneous flaps, 1 case of innervated tendocutaneous flap. The vascuality of recipient beds was good except in 4 cases (partial devascuality in 2, more than 50% avascuality (bone cement) in 2). Results: All flaps were survived. The mean number of included veins was 2.27 per flap. Mean static two-point discrimination was 10.5 mm in neurocutaneous flaps. In 3 of 5 cases where tendocutaneous flaps were used, active ROM at the PIP joint was 60 degrees, 30 degrees at the DIP joint and 40 degrees at the IP joint of thumb. There were no specific complications except partial necrosis in 3 cases. Conclusions: An arterialized venous free flap is a useful procedure for single-stage reconstruction in soft tissue or combined defect of the finger; we consider that this technique could be applied to fingers despite avascular recipient beds if the periphery of recipient bed vascularity is good.

  • PDF