• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.561-561
• /
• 2012

Graphene, two dimensional single layer of carbon atoms, has tremendous attention due to its superior property such as fast electron mobility, high thermal conductivity and optical transparency, and also found many applications such as field-effect transistors (FET), energy storage and conversion, optoelectronic device, electromechanical resonators and chemical sensors. Several techniques have been developed to form the graphene. Especially chemical vapor deposition (CVD) is a promising process for the large area graphene. For the electrically isolated devices, the graphene should be transfer to insulated substrate from Cu or Ni. However, transferred graphene has serious drawback due to remaining polymeric residue during transfer process which induces the poor device characteristics by impurity scattering and it interrupts the surface functionalization for the sensor application. In this study, we demonstrate the characteristics of solution-gated FET depending on the removal of polymeric residues. The solution-gated FET is operated by the modulation of the channel conductance by applying a gate potential from a reference electrode via the electrolyte, and it can be used as a chemical sensor. The removal process was achieved by several solvents during the transfer of CVD graphene from a copper foil to a substrate and additional annealing process with H2/Ar environments was carried out. We compare the properties of graphene by Raman spectroscopy, atomic force microscopy(AFM), and X-ray Photoelectron Spectroscopy (XPS) measurements. Effects of residual polymeric materials on the device performance of graphene FET will be discussed in detail.

• Current Optics and Photonics
• /
• 제1권1호
• /
• pp.65-72
• /
• 2017

We propose a nearly lossless, compact, electrically modulated vertical directional coupler, which is based on the controllable evanescent coupling in a previously proposed graphene-assisted total internal reflection (GA-FTIR) scheme. In the proposed device, two single-mode waveguides are separate by graphene-$SiO_2$-graphene layers. By changing the chemical potential of the graphene layers with a gate voltage, the coupling strength between the waveguides, and hence the coupling length of the directional coupler, is controlled. Therefore, for a properly chosen, fixed device length, when an input wave is launched into one of the waveguides, the ratio of their output powers can be controlled electrically. The operation of the proposed device is analyzed, with the dispersion relations calculated using a model of a one-dimensional slab waveguide. The supermodes in the coupled waveguide are calculated using the finite-element method to estimate the coupling length, realistic devices are designed, and their performance was confirmed using the finite-difference time-domain method. The designed $3{\mu}m$ by $1{\mu}m$ device achieves an insertion loss of less than 0.11 dB, and a 24-dB extinction ratio between bar and cross states. The proposed low-loss device could enable integrated modulation of a strong optical signal, without thermal buildup.

• 한국재료학회지
• /
• 제32권1호
• /
• pp.30-35
• /
• 2022

The development of advanced materials to improve the efficiency of photoelectrochemical (PEC) water splitting paves the way for widespread renewable energy technologies. Efficient photoanodes with strong absorbance in visible light increases the effectiveness of solar energy conversion systems. MoS₂ in a two-dimensional semiconductor that has excellent absorption performance in visible light and high catalytic activity, showing considerable potential as an agent of PEC water splitting. In this study, we successfully modulated the MoS₂ morphology on indium tin oxide substrate by using the metalorganic chemical vapor deposition method, and applied the PEC application. The PEC photocurrent of the vertically grown MoS₂ nanosheet structure significantly increased relative to that of MoS₂ nanoparticles because of the efficient transfer of charge carriers and high-density active sites. The enhanced photocurrent was attributed to the efficient charge separation and improved light absorption of the MoS₂ nanosheet structure. Meanwhile, the photocurrent property of thick nanosheets decreased because of the limit imposed by the diffusion lengths of carriers. This study proposes a valuable photoelectrode design with suitable nanosheet morphology for efficient PEC water splitting.

• 대한방사선기술학회지:방사선기술과학
• /
• 제35권2호
• /
• pp.109-117
• /
• 2012

간접형 CsI flat-panel detector (FPD)의 해상특성(modulation transfer function, MTF), 잡음특성(Wiener spectrum or noise power spectrum, NPS), 양자검출효율(detective quantum efficiency, DQE)을 측정하고 평가하기 위하여 본 실험을 실시하였다. IEC에서 권고한 실험방법을 따라 RQA3, RQA5, RQA7, RQA9의 방사선 선질을 사용하였다. MTF는 egde법을 사용하였다. Wiener spectrum은 조사 영역내에서 획득한 영상의 푸리에 변화를 통하여 구하였다. DQE는 MTF, WS(NPS), X선 입력 및 입력 광자량을 사용하여 평가하였다. 특성곡선은 RQA3와 RQA5, RQA7, RQA9과는 차이가 발생하였다. MTF는 X선 선질과는 상관없이 일정하였다. WS(NPS)은 X선 양이 증가 할수록 감소하였으며, RQA3, RQA5, RQA7, RQA9순으로 감소하였다. DQE는 1mR에서 가장 우수했으며, RQA3, RQA5, RQA7, RQA9순으로 감소하였다. FPD의 물리적 영상 특성을 입력 선질에 따라 다를 수 있다. 본 연구를 통하여 디지털 방사선 시스템의 바르게 사용하려면 FPD의 물리적 영상 특성을 아는 것이 중요함을 인식하게 되었다.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1388-1396
• /
• 2003

The hydrodynamic instability of the three-dimensional boundary layer on a rotating disk introduces a periodic modulation of the mean flow in the form of stationary cross flow vortices. The instability labeled Type II by Faller occurs first at lower Reynolds number than that of well known Type I instability. Detailed numerical values of the amplification rates, neutral curves and other characteristics of the two instabilities have been calculated over a wide range of parameters. Presented are the neutral stability results concerning the two instability modes by solving the appropriate linear stability equations reformulated not only by considering whole convective terms but also by correcting some errors in the previous stability equations. The present stability results agree with the previously known ones within reasonable limit. Consequently, the flow is found to be always stable for a disturbance whose dimensionless wave number is greater than 0.75. Some spatial amplification contours have been computed for the stationary disturbance wave, whose azimuth angle $\varepsilon$= 11.29$^{\circ}$ to 15$^{\circ}$ and for the moving disturbance wave, whose azimuth angle $\varepsilon$ = 12.5$^{\circ}$ to 15$^{\circ}$. Also, some temporal amplification contours have been computed for the stationary disturbance wave, whose azimuth angle $\varepsilon$= 11.29$^{\circ}$ to 15$^{\circ}$ and for the moving disturbance wave, whose azimuth angle $\varepsilon$= 12$^{\circ}$ to 15$^{\circ}$. The flow instability was observed by using a white titanium tetrachloride gas over rotating disk system. When the numerical results are compared to the present experimental data, the numerical results agree quantitatively, indicating the existence of the selective frequency mechanism.

• Journal of Crop Science and Biotechnology
• /
• 제10권2호
• /
• pp.112-116
• /
• 2007

Kinetin(KN) is an inducer of rice(Oryza sativa L.) defense/stress responses, as evidenced by the induction of inducible secondary metabolite and defense/stress protein markers in leaf. We show a novel light-dependent effect of KN-triggered defense stress responses in rice leaf. Leaf segments treated with KN(100 ${\mu}M$) show hypersensitive-like necrotic lesion formation only under continuous light illumination. Potent accumulation of two phytoalexins, sakuranetin and momilactone A(MoA) by KN that peaks at 48 h after treatment under continuous light is completely suppressed by incubation under continuous dark. Using two-dimensional gel electrophoresis we identified KN-induced changes in ribulose-1, 5-bisphosphate carboxylase/oxygenase, energy- and pathogenesis-related proteins(OsPR class 5 and 10 members) by N-terminal amino acid sequencing and mass spectrometry. These changes were light-inducible and could not be observed in the dark(and control). Present results provide a new dimension(light modulation/regulation) to our finding that KN has a potential role in the rice plant self-defense mechanism.

• 대한전자공학회논문지SD
• /
• 제42권12호
• /
• pp.103-112
• /
• 2005

본 논문에서는 압전 및 자발 분극 효과를 내포한 단채널 n-AlGaN/GaN HEMT의 전류-전압 특성을 도출하고자 AlGaN 및 GaN층 내에서 분극을 고려한 2차원 Poisson 방정식의 해법을 제안하였다. AlGaN 및 GaN층에서의 2차원적 전위 변화를 채널전류의 연속조건과 컨시스턴트하게 도출하기 위해서 GaN영역에 형성된 양자 우물을 통해 흐르는 전자에 대한 전계-의존 이동도를 고려하였다. 도출된 표현식은 동작 전압 전 영역과 장/단채널 소자에 대하여 일괄적으로 적용될 수 있을 것으로 보이며, 계산 결과로부터 2차원 전위 분포 변화 효과를 고려하기 위한 파라미터 ${\alpha}$의 도입이 타당함을 보이고 있다. 이로써, 본 모델은 기존의 모델에 비해 드레인 전압의 증가에 따른 드레인 포화전류의 증가 및 문턱 전압의 감소 현상 등을 보다 적절히 설명할 수 있음을 보이고 있다.

• 대한전자공학회논문지SP
• /
• 제41권5호
• /
• pp.53-62
• /
• 2004

본 연구에서는 화상평면내 미지 호흡운동에 의한 MRI 아티팩트를 수정하기 위한 개선된 후처리 기법을 제안한다. 호흡운동은 2차원의 선형확대축소 운동으로 모델화 된다 신체조직을 비압축성 유체모양의 물질로 가정할 때 촬상 대상물체에 대한 단위체적당 푸로톤 밀도는 일정하다고 가정한다. 적용한 모델에 의하면 호흡운동은 위상오차와 불균일 표본화 및 진폭변조왜를 MRI 데이터에 부여한다. 운동파라메타가 알려져 있거나 추정가능하다고 할 때 양선형 중첩법에 기초한 재구성 알고리즘이 MRI 아티팩트를 수정하기 위해 사용된다. 운동 파라메타가 미지인 경우 스펙트럼 이동법을 적용해서 호흡변동함수와 x 방향 확대계수 및 x 방향 확대중심을 추정한다. 다음으로 에너지 최소법을 이용해서 y 방향 확대계수 및 y 방향 확대중심을 추정한다. 최종적으로 시뮬레이션된 체동화상을 통해서 제안한 본 방법의 유효성을 확인한다.

• 대한한의학회지
• /
• 제23권4호
• /
• pp.140-150
• /
• 2002

Objectives: The water extract of Omija-tang (OMIT) has traditionally been used for treatment of ischemic heart and brain damage in oriental medicine. However, little is known about the mechanism by which the water extract of OMJT rescues cells from these damages. Therefore, this study was designed to investigate the protective mechanisms of OMJT on oxidative stress-induced toxicity in H9c2 cardiomyoblast cells. Methods: Treatments of $H_2O_2$, or $ZnC_{12}$ markedly induced death of H9c2 cardiomyoblast cells in a dose-dependent manner. The characteristics of oxidative stress-induced death of H9c2 showed apparent apoptotic features such as DNA fragmentation. OMJT significantly reduced both ${H_2O_2}-induced$ cell death and chromatin fragmentation. The decrease of B치-XL expression by $H_2O_2$ were inhibited by OMJT. In addition, the increase of Bcl-XS expression was also inhibited by OMJT. In particular, Fas expression, which is generally recognized as cell death-inducing signal by Fas/FasL interaction, was markedly increased by H2O2 in a time-dependent manner. Also, the expression profile of proteins in Chang cells were screened by using two-dimensional (2-D) gel electrophoresis. Among 300 spots resolved in 2-D gels; the comparison of control versus apoptotis cells revealed that signal intensity of 6 spots decreased and 11 spots increased. Results and Conclusions: Taken together, this study suggests that the protective effects of the water extract of OMJT against oxidative damages may be mediated by the modulation of Bcl-XL/S Fas expression.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.248-251
• /
• 2002

The intensity modulated radiation therapy (IMRT) with a multileaf collimator (MLC) requires the conversion of a radiation fluence map into a leaf sequence file that controls the movement of the MLC during radiation treatment of patients. Patient dose verification is clinically one of the most important parts in the treatment delivery of the radiation therapy. The three dimensional (3D) reconstruction of dose distribution delivered to the target helps to verify patient dose and to determine the physical characteristics of beams used in IMRT. A new method is presented for the pretreatment dosimetric verification of two dimensional distributions of photon intensity by means of Beam Intensity Scanner System (BISS) as a radiation detector with a custom-made software for dose calculation of fluorescence signals from scintillator. The scintillator is used to produce fluorescence from the irradiation of 6MV photons on a Varian Clinac 21EX. The BISS reproduces 3D- relative dose distribution from the digitized fluoroscopic signals obtained by digital video camera-based scintillator(DVCS) device in the IMRT. For the intensity modulated beams (IMBs), the calculations of absorbed dose are performed in absolute beam fluence profiles which are used for calculation of the patient dose distribution. The 3D-dose profiles of the IMBs with the BISS were demonstrated by relative measurements of photon beams and shown good agreement with radiographic film. The mechanical and dosimetric properties of the collimating of dynamic and/or step MLC system alter the generated intensity. This is mostly due to leaf transmission, leaf penumbra and geometry of leaves. The variations of output according to the multileaf opening during the irradiation need to be accounted for as well. These phenomena result in a fluence distribution that can be substantially different from the initial and calculative intensity modulation and therefore, should be taken into account by the treatment planning for accurate dose calculations delivered to the target volume in IMRT.