• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.62-67
• /
• 2012

To realize 2-dimensional vibrational micro cutting in milling and drilling, etc. where the tools rotate, it could be a promising way to vibrate a workpiece instead of a rotating tool itself. In this study, an excitation work-table was developed using two piezoelectric materials orthogonally arranged. The trochoidal trajectory of a cutting tool which is necessary for 2D vibrational cutting is enabled in the excitation condition of higher excitation frequency and larger amplitude of vibration and the cutting condition of smaller diameter of cutting tool and lower spindle speed. The various trochoidal trajectories of a cutting tool could be generated in the excitation work-table by adjusting the input voltages to two piezoelectric materials and the phase between the two voltages and the trajectories could be readily used for the 2D vibrational micro cutting.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.2
• /
• pp.27-35
• /
• 2013

In this study, three dimensional and two dimensional laboratory experiments were conducted to investigate the effect of water table rising on DNAPL migration, contaminants mass discharge ($M_d$), and residual NAPL distribution. The accumulation of TCE in unsaturated zone was observed in both two and three dimensional experiments. This implies DNAPL sources could exist in unsaturated zone at contaminated sites. It has been investigated that the TCE concentration is proportional to the areal ratio of residual TCE. This means the residual TCE obviously could affect the TCE concentration in aquifer system. The results of the two-dimensional experiment indicated that the contaminant sources in unsaturated zone could lead the $M_d$ increasing with water table rising and the source zone heterogeneity could also highly affect the $M_d$.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.1
• /
• pp.41-55
• /
• 2018

For several decades, attribute classification methods using the asymmetrical relationship between an attribute performance and the satisfaction of that attribute have been explored by numerous researchers. In particular, the Kano model, which classifies quality attributes into 5 elements using simple questionnaire and two-dimensional evaluation table, has gained popularity: Attractive, One-dimensional, Must-be, Indifferent, and Reverse quality. As Kano's model is well accepted, many literatures have introduced categorization methods using the Kano's evaluation table at attribute level. However, they applied different terminologies and classification criteria and this causes confusion and misunderstanding. Therefore, a criterion for quality classification at attribute level is necessary. This study is aimed to suggest a new attribute classification method that sub-categorizes quality attributes using 5-point ordinal point and Kano's two-dimensional evaluation table through an extensive literature review. For this, the current study examines the intrinsic and extrinsic problems of the well-recognized Kano model that have been used for measuring customer satisfaction of products and services. For empirical study, the author conducted a comparative study between the results of Kano's model and the proposed method for an e-learning case (33 attributes). Results show that the proposed method is better in terms of ease of use and understanding of kano's results and this result will contribute to the further development of the attractive quality theory that enables to understand both the customers explicit and implicit needs.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.81-86
• /
• 2013

For a 2-dimensional(2D) vibration milling, an excitation work-table was developed using two piezoelectric materials orthogonally arranged, where the trochoidal trajectory of a milling tool is combined with 2 dimensional elliptical vibration of a work-table. Applying 3kHz excitation frequency and 7~8mm amplitude of vibration to micro milling process with brass and nickel materials, the roughness in both bottom and side surface is much more improved compared to the surface by conventional milling process, which is attributed to decreased frictional force, increased cutting speed, and rubbing effect of a 2 dimensional vibration.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.6
• /
• pp.1547-1555
• /
• 2015

We study the problem of nonignorable nonresponse in a two-way contingency table and there may be one or two missing categories. We describe a nonignorable nonresponse model for the analysis of two-way categorical table. One approach to analyze these data is to construct several tables (one complete and the others incomplete). There are nonidentifiable parameters in incomplete tables. We describe a hierarchical Bayesian model to analyze two-way categorical data. We use a nonignorable nonresponse model with Bayesian uncertainty analysis by placing priors in nonidentifiable parameters instead of a sensitivity analysis for nonidentifiable parameters. To reduce the effects of nonidentifiable parameters, we project the parameters to a lower dimensional space and we allow the reduced set of parameters to share a common distribution. We use the griddy Gibbs sampler to fit our models and compute DIC and BPP for model diagnostics. We illustrate our method using data from NHANES III data to obtain the finite population proportions.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.4
• /
• pp.717-729
• /
• 2004

The contour method which was originally designed for $2{\times}2{\times}2$ contingency table is studied for $2{\times}2{\times}K$ and $2{\times}3{\times}K$ tables. Whereas a contour plot for a $2{\times}2{\times}K$ table is represented on unit squared two dimensional plane, a contour plot of a $2{\times}3{\times}K$ table can be expressed with a regular hexahedron on three dimensional space. Based on contour plots for categorical data fitted to all possible three dimensional log-linear models, one might identify whether $2{\times}2{\times}k$ or $2{\times}3{\times}K$ tables are collapsible over the third variable.

• Structural Engineering and Mechanics
• /
• v.48 no.2
• /
• pp.151-171
• /
• 2013

The current paper presents the numerical blind prediction of nonlinear seismic response of two full-scale, three dimensional, one-story reinforced concrete structures subjected to bidirectional earthquake simulations on shaking table. Simulations were carried out at the laboratories of LNEC (Laboratorio Nacional de Engenharia Civil) in Lisbon, Portugal. The study was motivated by participation in the blind prediction contest of shaking table tests, organized by the challenge committee of the 15th World Conference on Earthquake Engineering. The test specimens, geometrically identical, designed for low and high ductility levels, were subjected to subsequent earthquake motions of increasing intensity. Three dimensional nonlinear analytical models were implemented and subjected to the input base motions. Reasonably accurate reproduction of the measured displacement response was obtained through appropriate modeling. The goodness of fit between analytical and measured results depended on the details of the analytical models.

• IE interfaces
• /
• v.8 no.2
• /
• pp.127-134
• /
• 1995

• Journal of Industrial Technology
• /
• v.19
• /
• pp.415-421
• /
• 1999

In this paper, a 2D X-Y table, two axes of which are symmetrical, and a force sensing device are constructed, which comprise a 2D haptic interfacing apparatus. Two DC motors are used for actuating the two axes of the table and two precision encoders for sensing the position of each axis. Four PZTs are used for sensing the direction and the magnitude of the 2D force applied to the force sensing device by the user. The performance of the 2D haptic interface device is tested by 2D virtual object recognition experiments.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.66-70
• /
• 2010

Using two piezoelectric materials orthogonally arranged, 2-dimensional(2D) vibration in a excitation workpiece table was generated. In this study, micro milling using high frequency 2D vibration was proposed, whose locus of cutting tool is combined with original trochoid locus of milling tool and 2D elliptical locus of excitation table. From the cutting results of 2D vibrational micro milling of nickel alloy, it was observed that the machining quality and the roughness of machined surface were enhanced compared to conventional milling in a side cutting whose immersion ration is relatively low, whereas there was little betterment in a slot cutting.