• 대한방사선기술학회지:방사선기술과학
• /
• 제28권2호
• /
• pp.97-103
• /
• 2005

목 적 : 본 연구에서는 표준인 AP-WB(Weight-Bearing AP) 촬영법과 MTP(Semiflexed or metatarsophalangeal) 촬영법을 소개하고 판독 시 중요하게 여기는 관절간격과 신생골 묘출에 따른 항목을 각각 비교 고찰하여 골관절염 환자의 진단율을 향상시키고자 한다. 대상 및 방법 : 2004년 1월에서 2005년 1월까지 Knee Pain이 있는 환자로 본원의 류마티스내과에 내원한 220명(남:38명, 여:182명, 평균연령:57.3세)의 환자를 대상으로 표준인 AP-WB와 MTP검사를 병행하여 실시하였다. MTP검사는 20명의 모의환자로 발의 위치를 확인하며 슬개골이 슬관절부 정중앙에 위치하고, 관절강의 좌우대칭이 일치하도록 하였다. 관절간격과 신생골을 0(나쁨), 1(보통), 2(좋음), 3(아주좋음)점으로 구분하여 정형외과의사 3명, 류마티스 내과의사 2명, 방사선과 전문의 3명, 방사선사 5명이 PACS 모니터에서 영상을 Blind test하였다. 장비는 PHILIPS(Buckey Diagnostic-TH)를 사용하였고, 100 cm거리에서, 60 Kv, 8 mAs로 설정하였다. 결 과 : 위 방법으로 다음과 같은 결과를 얻을 수 있었다. 1. MTP 촬영법 : 발을 바깥쪽으로 $15^{\circ}$회전하고 무릎을 구부려 카세트 면에 대면 슬개골이 슬관절부의 정중앙에 위치하였고,관절강의 정렬에 따른 좌우대칭이 일치하였다. 2. 관절간격 점수 : AP-WB 촬영법; $1.32{\pm}0.050$, MTP 촬영법; $2.51{\pm}0.046$ 3. 신생골 점수 : AP-WB 촬영법; $2.14{\pm}0.054$, MTP 촬영법; $2.10{\pm}0.054$ 결론 및 고찰 : 이번 연구는 임상적인 판독 방법으로 관절간격과 신생골에 따른 점수를 비교 했을 때, MTP 촬영법이 가장 중요한 관절간격을 영상으로 표출하는데 있어서 기존의 AP-WB 촬영법보다 훨씬 더 우세하다는 결론을 갖게 되었다. 따라서 향후 골관절염 환자의 진단율을 향상시키는 데는 MTP촬영법이 유용할 것으로 사료된다.

• 방송공학회논문지
• /
• 제4권1호
• /
• pp.59-67
• /
• 1999

본 논문에서는 입체 영상 시스템 중 전송단에서의 영상의 입체감 분석을 위한 변이추정 과정과 수신단에서의 중간시점영상 재구성 방식에 대해 중점적으로 연구하였다. 변이추정은 기본적으로 MAE(mean absolute error)를 최소가 되도록 하는 동시에, 블록의 변이를 각 방향에서의 영상의 벼화량에 반비례하게 평활화하는 반복적 블록 정합 방식을 제안하여 적용하였다. 수신단에서는 복원된 영상과 변이 정보를 이용하여 중간시점 영상을 재구성하였으며, 보간법(interpolation)을 사용하는 동시에 좌 또는 우영상의 가려진 영역(occlusion)에서는 좌우 영상 중 한 영상에서의 외삽법(extrapolation)을 사용하여 변이-보상 변이 전달방식으로 이를 합성하였다. 이 변이 추정 방식으로영상의 평활 영역에서 일정하게 평활화된 변이를 추정하여 변이 정보에 대한 정보량을 줄이고, 경계부분에서는 평활화 방식에서 흔히 발생하는 과평활화 문제를 해결하였다. 또한 IVR 에서는 다른 방식에 비해 영상의 경계 부분을 보존하며, occlusion 영역을 잘 살리는 특성을 보였다.

• 전기의세계
• /
• 제24권1호
• /
• pp.55-62
• /
• 1975

A single-phase induction motor with it's stator winding splitted into two series windings, of which the terminals of one winding is switched pulsationally by a thyristor type ON-OFF device so that the motor may operate as a pulsational shaded-pole motor, can modulate current waveforms of it's two series windings. In view of current waveform modulation method, a single-phase single-winding motor operates as a two-phase induction motor with asymmetrical axis windings where the starting torque can be obtained effectively without an auxiliary capacitor attached and it's running speed controlled by shifting phase between current waveforms differently. Equivalent circuit for analysis is modified from a double revolving field equivalent circuit of a single-phase induction motor with asymmetrical windings whose angle is 45.deg.C elet. degrees. Analysis and test results show that ON-OFF action of the pulsational shaded-pole winding has the same effect of a series capacitor, and then at heavy loads this motor operates with a small amonut of the input current than that having the fixed shaded-pole winding.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.399-403
• /
• 2005

Slope angle, ground water table and thickness of soils are the key factors affecting landslide stability. However examining the factors such as thickness of soils; geological structure, slope angle, and height, in order to use the global landslide susceptibility forecasting analysis is very expensive and time consuming effort. So most researchers prefer to use the simplest methods such as the C strata and the USGS methods. In this research thickness of soils was calculated using these two methods and stability analysis was performed with the thickness of soils calculated by the two methods at the SINMAP based on ArcView 3.2. The two safety factor maps were compared with the past landslide records. The thickness of soils calculated by USGS method showed more unstable safety factors.

• Communications for Statistical Applications and Methods
• /
• 제20권5호
• /
• pp.347-356
• /
• 2013

We propose a sequential method to construct approximate confidence limits for the ratio of two independent sequences of binomial variates with unequal sample sizes. Due to the nonexistence of an unbiased estimator for the ratio, we develop the procedure based on a modified maximum likelihood estimator (MLE). We generalize the results of Cho and Govindarajulu (2008) by defining the sample-ratio when sample sizes are not equal. In addition, we investigate the large-sample properties of the proposed estimator and its finite sample behavior through numerical studies, and we make comparisons from the sample information view points.

• Journal of Ubiquitous Convergence Technology
• /
• 제1권1호
• /
• pp.35-41
• /
• 2007

In mobile ad-hoc wireless networks, one of the most important challenging issues is how to conserve energy, maximizing the lifetime of route(networks) in the view points of both power and mobility of nodes. However, many transmission methods presented in the previous works can not satisfy these two objectives simultaneously. To obtain these two goals, in this paper we propose an architecture to support power saving transmission services with route stability in mobile ad-hoc wireless networks. The proposed architecture consists of two parts, the underlying route stability method to support route(network) lifetime and the power saving transmission methods. The performance evaluation of the proposed architecture is achieved via simulation and analysis.

• 제어로봇시스템학회논문지
• /
• 제12권11호
• /
• pp.1102-1110
• /
• 2006

This paper addresses the problem of computing grasp stability of the object for two-fingered robots in two dimensions. The concepts of force-closure and dual space are introduced and discussed in novel point of view, and we transform friction cones in a robot work space to line segments in a dual space. We newly define a grasp stability index by calculating intersection condition between line segments in dual space. Moreover, we propose a method to find the optimal grasp points of the given object by comparing the defined grasp stability index. Its validity and effectiveness are investigated and verified by simulations for quadrangle object and elliptic objects.

• 한국산업융합학회 논문집
• /
• 제5권1호
• /
• pp.3-9
• /
• 2002

In the field of design of mechanical structure and expectation of life time, characteristic of fatigue limit comes out to he the most important problem. In this paper, in order to get fatigue limit, (I) investigate the aspects of economy, time and confidence comparing two methods: the method by fracture probability introducing statistical conception and the staircase method. And (II) examine the experience approaching fatigue limit and coaxing effect. The value of fatigue limit by staircase method in very effective in view of practical use, and coaxing comes out by the same material effect as restraining crack progress, not as strengthening the tip of crack alone.

• 한국전산유체공학회지
• /
• 제9권2호
• /
• pp.43-51
• /
• 2004

Interaction between fluid flow and thermal radiation has received considerable attention due to its numerous applications in engineering field. In this case the thermofluid properties of radiating fluid vary with the variation of temperature field caused by absorption and emission of radiant heat. To analyze the radiation heat transfer in radiating fluid, the simultaneous solution of the radiative transfer equation (RTE) and the fluid dynamics equations is required. This means that the numerical procedure used for the RTE must be computationally efficient to permit its inclusion in the other submodels, and must be compatible with the other transport equations. The finite volume method (FVM) and the discrete ordinates method (DOM) are usually employed to simulate radiation problems in generalized coordinates. These two representative methods are examined and compared, especially in view of the numerical integration of the radiation intensity over solid angle. The FVM shows better accuracy than the DOM owing to less constraints of the selection of control angle.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.62-70
• /
• 2004

Interaction between fluid flow and thermal radiation has received considerable attention due to its numerous applications in engineering field. In this case the thermofluid properties of radiating fluid vary with the variation of temperature field caused by absorption and emission of radiant heat. To analyze the radiation heat transfer in radiating fluid, the simultaneous solution of the radiative transfer equation (RTE) and the fluid dynamics equations is required. This means that the numerical procedure used for the RTE must be computationally efficient to permit its inclusion in the other submodels, and must be compatible with the other transport equations. The finite volume method (FVM) and the discrete ordinates method (DOM) are usually employed to simulate radiation problems in generalized coordinates. These two representative methods are examined and compared, especially in view of the numerical integration of the radiation intensity over solid angle. The FVM shows better accuracy than the DOM owing to less constraints of the selection of control angle.