• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.1022-1030
• /
• 2002

The experiments were performed with a $31{\times}31{\times}7mm^3$ simulated 3-dimensional module on the thermal conductive board of a parallel plate channel. The convective thermal conductance for the path from the module surface directly to airflow and conjugate thermal conductance for the path leading from the module to the floor by way of a module support, then, to the airflow were determined with several combinations of module-support-construction(210, 0.32, 0.021 K/W)/floor-material(398, 0.236W/mK) and channel height(15-30mm). As the result, it was found that the conjugate thermal conductance and the temperature distribution around the module depend on the thermal resistance of the module support, and the channel height. These configurations were designed to investigate on the feasibility of using the substrate as an effective heat spreader in the forced convective air-cooling of surface mounted heat source. The experimental results were discussed in the light of interactive nature of heat transfer through two paths, one directed from the module to the airflow and the other via the module support and the floor to the air.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.625-630
• /
• 2000

Numerical and experimental investigations are peformed for the rarefied gas flows in pumping channels of a helical-type drag pump. Modern turbomolecular pumps include a drag stage in the discharge side, operating roughly in $10^{-2}{\sim}10Torr$. The flow occurring in the pumping channel develops from the molecular transition to slip flow traveling downstream. Two different numerical methods are used in this analysis: the first one is a continuum approach in solving the Navier-Stokes equations with slip boundary conditions, and the second one is a stochastic particle approach through the use of the direct simulation Monte Carlo(DSMC) method. The flow in a pumping channel is three-dimensional(3D), and the main difficulty in modeling a 3D case comes from the rotating frame of reference. Thus, trajectories of particles are no longer straight lines. In the Present DSMC method, trajectories of particles are calculated by integrating a system of differential equations including the Coriolis and centrifugal forces. Our study is the first instance to analyze the rarefied gas flows in rotating frame in the presence of noninertial effects.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권4호
• /
• pp.278-286
• /
• 2011

In this paper, we present a compact model of gate-voltage-dependent quantum effects in short-channel surrounding-gate (SG) metal-oxide-semiconductor field-effect transistors (MOSFETs). We based the model on a two-dimensional (2-D) analytical solution of Poisson's equation using cylindrical coordinates. We used the model to investigate the electrostatic potential and current sensitivities of various gate lengths ($L_g$) and radii (R). Schr$\ddot{o}$dinger's equation was solved analytically for a one-dimensional (1-D) quantum well to include quantum effects in the model. The model takes into account quantum effects in the inversion region of the SG MOSFET using a triangular well. We show that the new model is in excellent agreement with the device simulation results in all regions of operation.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.861-864
• /
• 2006

본 연구에서는 분석학적 모델을 이용하여 나노구조 이중게이트 MOSFET의 전도현상을 고찰하고자 한다. 분석학적모델을 유도하기 위하여 포아슨방정식을 이용하였다. 전류전도에 영향을 미치는 전도메카니즘은 열방사전류와 터널링전류를 사용하였으며 본 연구의 모델이 타당하다는 것을 입증하기 위하여 서브문턱스윙값에 대하여 이차원 시뮬레이션값과 비교하였다. 이중게이트 MOSFET의 구조적 파라미터인 게이트길이, 게이트 산화막 두께, 채널두께에 따라 전도중심의 변화와 전도중심이 서브문턱 스윙에 미치는 영향을 고찰하였다. 또한 채널도핑농도에 따른 전도중심의 변화를 고찰함으로써 이중 게이트 MOSFET의 타당한 채널도핑농도를 결정하였다.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.287-295
• /
• 2020

Group method of data handling (GMDH) is considered one of the earliest deep learning methods. Deep learning gained additional interest in today's applications due to its capability to handle complex and high dimensional problems. In this study, multi-layer GMDH networks are used to perform uncertainty quantification (UQ) and sensitivity analysis (SA) of nuclear reactor simulations. GMDH is utilized as a surrogate/metamodel to replace high fidelity computer models with cheap-to-evaluate surrogate models, which facilitate UQ and SA tasks (e.g. variance decomposition, uncertainty propagation, etc.). GMDH performance is validated through two UQ applications in reactor simulations: (1) low dimensional input space (two-phase flow in a reactor channel), and (2) high dimensional space (8-group homogenized cross-sections). In both applications, GMDH networks show very good performance with small mean absolute and squared errors as well as high accuracy in capturing the target variance. GMDH is utilized afterward to perform UQ tasks such as variance decomposition through Sobol indices, and GMDH-based uncertainty propagation with large number of samples. GMDH performance is also compared to other surrogates including Gaussian processes and polynomial chaos expansions. The comparison shows that GMDH has competitive performance with the other methods for the low dimensional problem, and reliable performance for the high dimensional problem.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3086-3091
• /
• 2007

When a molten corium is relocated in a lower head of a reactor vessel, the ERVC (External Reactor Vessel Cooling) system is actuated as coolant is supplied into a reactor cavity to remove a decay heat from the molten corium during a severe accident. To achieve this severe accident mitigation strategy, the two-phase natural circulation flow in the annular gap between the external reactor vessel and the insulation should be formed sufficiently by designing the coolant inlet/outlet area and gap size adequately on the insulation device. For this reason, one-dimensional natural circulation flow tests were conducted to estimate the natural circulation flow under the ERVC condition of APR1400. The experimental facility is one-dimensional and scaled-down as the half height and 1/238 rectangular channel area of the APR1400 reactor vessel. As the water inlet area increased, the natural circulation mass flow rate asymptotically increased, that is, it converged at a specific value. And the circulation mass flow rate also increased as the outlet area, injected air flow rate, and outlet height increased. But the circulation mass flow rate was not changed along with the external water level variation if the water level was higher than the outlet height.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.557-560
• /
• 2008

A two-dimensional particle-in-cell(PIC) simulation with a Monte-Carlo Collision(MCC) has been developed to investigate the discharge characteristics of the acceleration channel of a HET. The dynamics of electrons and ions are treated with PIC method at the time scale of electrons in order to investigate the particle transport. The densities of charged particles are coupled with Poisson's equation. Xenon neutrals are injected from the anode and experience elastic, excitation, and ionization collisions with electrons, and are scattered by ions. These collisions are simulated by using an MCC model. The effects of control parameters such as magnetic field profile, electron current density, and the applied voltage have been investigated. The secondary electron emission on the dielectric surface is also considered.

• Journal of Semiconductor Engineering
• /
• 제3권2호
• /
• pp.161-167
• /
• 2022

Electrical characteristics of LDMOS power device with LDD(Lightly Doped Drain) structure is studied with variation of the region of channel and LDD. The channel in LDMOSFET encloses a junction-type source and is believed to be an important parameter for determining the circuit operation of CMOS inverter. Two-dimensional TCAD MEDICI simulation is used to study hot-carrier effect, on-resistance Ron, breakdown voltage, and transient switching characteristic. The voltage-transfer characteristics and on-off switching properties are studied as a function of the channel length and doping levels. The digital logic levels of the output and input voltages are analyzed from the transfer curves and circuit operation. Study indicates that drain current significantly depends on the channel length rather than the LDD region, while the switching transient time is almost independent of the channel length. The high and low logic levels of the input voltage showed a strong dependency on the channel length, while the lateral substrate resistance from a latch-up path in the CMOS inverter was comparable to that of a typical CMOS inverter with a guard ring.

• 한국수자원학회논문집
• /
• 제44권2호
• /
• pp.145-156
• /
• 2011

본 연구에서는 자연하천의 흐름에서 흔히 발생하는 천이류, 불연속류, 마른하도로의 파의 전파 등을 포함하는 복잡한 흐름을 해석하기 위한 고정확도 2차원 수치모형을 개발하였다. 하상경사항을 효율적으로 처리하기 위해 quasi-steady wave propagation 기법을 적용하여 해당 격자에 대한 생성항의 영향을 효율적으로 반영함으로써 쌍곡선형 적분 보존형의 2차원 천수방정식을 해석하였다. Fractional Step Method를 적용한 유한체적기법의 사용을 위해 HLL Riemann 해법을 이용하여 흐름률을 계산하였고, 시간 및 공간에 대한 2차 정확도를 만족하기 위해 MUSCL 기법을 적용하였다. 2차 정확도의 사용으로 불연속지점에서 발생하는 수치진동은 TVD 기법 적용을통해 제어하였다. 개발된모형은 2차원 제방 붕괴 및 댐하류부에 구조물이 존재하는 경우의댐 붕괴 모의를 통해실측치와의 검증을 실시하였다. 또한 하류부에 역경사가 존재하는 경우의 댐 붕괴 모의를 통해 실측치와 비교함으로써 생성항의 영향에 대한 모형의 적용성을 검증하였다.

• 한국수자원학회논문집
• /
• 제32권6호
• /
• pp.697-709
• /
• 1999

금강에 위치한 부여취수장 부근에서의 유사이송을 모의하기 위해서 2차원 유한요소모형(RMA)이 적용되었다. 다양한 유량조건하에서 하상변동에 관한 모의수행결과는 과거 이 지역에서의 실측된 값과 잘 일치하였다. 본 연구에서 하도부의 개선과 취수구 부근의 하상저하를 위한 대안으로서 수제공 설치와 밤섬제거가 고려되었다. 수제공의 설치에 다라 좌안쪽으로 주흐름이 변환되었으며, 전 영역에 걸쳐서 비슷한 폭을 가진 하도가 형성되었다. 12,030{{{{ { m}^{3 } }}}}/sec 유량조건을 적용하였을 때, 주수로부의 하상고는 약 5∼20{{{{ { cm}_{ } }}}} 저하하였으며, 밤섬제거에 대한 효과는 유사이송에 그다지 큰 영향을 미치지 못하였다. 취수구 상류부에서의 지속적인 하상저하를 위해서 수제공의 설치는 유사유입을 저감시키는데 효과적인 것으로 판단되었다.